Thermal efficiency enhancement using a ceramic coating on the cylinder liner and the piston head of the IC engine

References

• Alkidas, A. C. 1989. “Performance and Emissions Achievements with an Un-cooled Heavy Duty Single Cylindered Diesel Engine.” SAE International, Paper No. 890144.
   Google Scholar
• Assanis, D., K. Wiese, E. Schwarz, and W. Bryzik. 1991. “The Effect of Ceramic Coatings on Diesel Engine Performance and Exhaust.” SAE International, Paper No. 910460.
   Google Scholar
• Bryzik, W., and R. Kamo. 1983. “TACOM/Cummins Adiabatic Engine Program.” SAE International, Paper No. 830314.
   Google Scholar
• Buyukkaya, E., T. Engin, and M. Cerit. 2006. “Effects of Thermal Barrier Coating on Gas Emissions and Performance of a LHR Engine with Different Injection Timings and Valve Adjustments.” Energy Conversion and Management 47: 1298–1310. doi: 10.1016/j.enconman.2005.06.021
   Web of Science ®Google Scholar
• Cheng, W. K., V. W. Wong, and F. Gao. 1989. “Heat Transfer Measurement Comparisons in Insulated and Non-insulated Diesel Engines.” SAE International, Paper No. 890570.
   Google Scholar
• Gatowski, J. A. 1990. “Evaluation of a Selectively-cooled Single Cylindered 0.5-L Diesel Engine.” SAE International, Paper No. 900693.
   Google Scholar
• Havstad, P. H., I. J. Garwin, and W. R. Wade. 1986. “Ceramic Insert Un-cooled Diesel Engine.” SAE International, Paper No. 860447.
   Google Scholar
• Jaichandar, S., and P. Tamilporai. 2003. “Low Heat Rejection Engines – An Overview.” SAE International, Paper No. 2003-01-0405.
   Google Scholar
• Janardhan, N., P. Ushasri, M. V. S. Murali Krishna, and P. V. K. Murthy. December 2012. “Performance of Biodiesel in Low Heat Rejection Diesel Engine with Catalytic Converter.” International Journal of Engineering & Advanced Technology 2 (2).
   Google Scholar
• Jayanti, Nadia Tri, Angga Rusdinar, and M. T. Agung Surya Wibowo. August 2017. “Perancangan Sistem Pengontrolan Pergerakan Automated Guided Vehicle (AGV) Untuk Menarik Troli Menggunakan Sensor Lidar Design of Automated Guided Vehicle (AGV) Movement Control System for Pulling Trolley using Lidar Sensor.” e-Proceeding of Engineering 4 (2).
   Google Scholar
• Kamo, R., and W. Bryzik. 1978. “Adiabatic Turbo-compound Engine Performance Prediction.” SAE International, Paper No. 780068.
   Google Scholar
• Kamo, R., and W. Bryzik. 1979. “Ceramics in Heat Engines.” SAE International, Paper No. 790645.
   Google Scholar
• Kamo, R., and W. Bryzik. 1981. “Cummins–TRADOCOM Adiabatic Turbo-compounded Engine Program.” SAE International, Paper No. 810070.
   Google Scholar
• Kamo, R., and W. Bryzik. 1984. “Cummins/TACOM Advanced Adiabatic Engine.” SAE International, Paper No. 840428.
   Google Scholar
• Kamo, R., W. Bryzik, M. Reid, and M. Woods. 1997. “Coatings for Improving Engine Performance.” SAE International, Paper No. 970204.
   Google Scholar
• Kamo, R., M. E. Woods, and W. Bryzik. 1989. “Thin Thermal Barrier Coating for Engines.” United States Patent, Patent No. US4852542.
   Google Scholar
• Miyairi, Y., T. Matsuhisa, T. Ozawa, H. Oikawa, and N. Nakashima. 1989. “Selective Heat Insulation of Combustion Chamber Walls for a DI Diesel Engine with Monolithic Ceramics.” SAE International, Paper No. 890141.
   Google Scholar
• Moore, C. H., and J. L. Hoehne. 1986. “Combustion Chamber Insulation Effect on the Performance of a Low Heat Rejection Cummins V-903 Engine.” SAE International, Paper No. 860317.
   Google Scholar
• Morel, T., S. Wahiduzzaman, and E. F. Fort. 1988. “Heat Transfer Experiments in an Insulated Diesel.” SAE International, Paper No. 880186.
   Google Scholar
• Murthy, P. V. K., M. V. S. Krishna, A. Raju, C. M. Prasad, and N. V. Srinivasulu. 2010. “Performance Evaluation of Low Heat Rejection Diesel Engine with Pure Diesel.” International Journal of Applied Engineering Research 1 (3): 428–451.
   Google Scholar
• Patil, Sangram J., D. P. Patil, A. P. Shrotri, and V. P. Patil. November 2014. “A Review on Effect of Addition of Nano Particles on Tribological Properties of Lubricants.” International Journal of Mechanical Engineering & Technology(IJMET) 5 (11): 120–129.
   Google Scholar
• Ramu, P., and C. G. Saravanan. 2009. “Effect of ZrO2–Al2O3 and SiC Coating on Diesel Engine to Study the Combustion and Emission Characteristics.” SAE International, Paper No. 2009-01-1435.
   Google Scholar
• Sekar, R. R., and R. Kamo. 1984. “Advanced Adiabatic Diesel Engine for Passenger Cars.” SAE International, Paper No. 840434.
   Google Scholar
• Shah, Janki, Sanjeev K. Gupta, Yogesh Sonvanea, and Vipul Davariya. 2017. “Review: Enhancing Efficiency of Solar Thermal Engineering Systems by Thermophysical Properties of a Promising Nanofluids.” Renewable & Sustainable Energy Reviews, doi:10.1016/j.rser.2017.02.030.
   Web of Science ®Google Scholar
• Sun, X., W. G. Wang, D. W. Lyons, and X. Gao. 1993. “Experimental Analysis and Performance Improvement of Single Cylinder Direct Injection Turbocharged Low Heat Rejection Engine.” SAE International, Paper No. 930989.
   Google Scholar
• Suzuki, T., M. Tsujita, Y. Mori, and T. Suzuki. 1986. “An Observation of Combustion of Phenomenon on Heat Insulated Turbocharged and Inter-cooled DI Diesel Engines.” SAE International, Paper No. 861187.
   Google Scholar
• Thring, R. H. 1986. “Low Heat Rejection Engines.” SAE International, Paper No. 860314.
   Google Scholar
• Uzun, A., I. Cevik, and M. Akcil. 1999. “Effects of Thermal Barrier Coating on a Turbocharged Diesel Engine Performance.” Surface and Coatings Technology 116–119: 505–507. doi: 10.1016/S0257-8972(99)00099-7
   Web of Science ®Google Scholar
• Wade, W. R., P. H. Havstad, E. J. Ounsted, F. H. Trinkerand, and I. J. Garwin. 1984. “Fuel Economy Opportunities with an Un-cooled DI Diesel Engine.” SAE International, Paper No. 841286.
   Google Scholar
• Winkler, M. F., and D. W. Parker. 1993. “The Role of Diesel Ceramic Coatings in Reducing 315 A Review of Thermal Barrier Coating … International Journal of Automotive Engineering Vol. 3, Number 1, March 2013 Automotive Emissions and Improving Combustion Efficiency.” SAE International, Paper No. 930158.
   Google Scholar
• Winkler, M. F., D. W. Parker, and J. A. Bonar. 1992. “Thermal Barrier Coatings for Diesel Engines: Ten Years of Experience.” SAE International, Paper No. 922438.
   Google Scholar
• Woschni, G., W. Spindler, and K. Kolesa. 1987. “Heat Insulation of Combustion Chamber Walls – A Measure to Decrease the Fuel Consumption of IC Engines.” SAE International, Paper No. 870339.
   Google Scholar