74
Views
10
CrossRef citations to date
0
Altmetric
Original Articles

Impact of nozzle opening pressure on the performance and emission behaviours of the CI engine using yellow oleander biodiesel

, , &
Pages 1499-1505 | Received 20 Dec 2018, Accepted 20 Apr 2019, Published online: 22 May 2019

References

  • Agarwal, A. K., A. Dhar, J. G. Gupta, W. I. Kim, K. Choi, and C. S. Lee. 2015. “Effect of Fuel Injection Pressure and Injection Timing of Karanja Biodiesel Blends on Fuel Spray, Engine Performance, Emissions and Combustion Characteristics.” Energy Conversion Management 91: 302–314. doi: 10.1016/j.enconman.2014.12.004
  • Ali, M. Obed, Rizalman Mamat, Nik R. Abdullah, and Abdul Adam Abdullah. 2016. “Analysis of Blended Fuel Properties and Engine Performance with Palm Biodiesel Diesel Blended Fuel.” Renewable Energy 86: 59–67. doi: 10.1016/j.renene.2015.07.103
  • Anbarasu, A., and A. Karthikeyan. 2015. “Effect of Injection Pressure on the Performance and Emission Characteristics of CI Engine Using Canola Emulsion Fuel.” International Journal of Ambient Energy 38 (3): 314–319. doi: 10.1080/01430750.2015.1092472
  • Arunprasad, S., and T. Balusamy. 2018. “Experimental Investigation on the Performance and Emission Characteristics of a Diesel Engine by Varying the Injection Pressure and Injection Timing Using Mixed Biodiesel.” International Journal of Green Energy 15 (6): 376–384. doi: 10.1080/15435075.2018.1464923
  • Aydin, Hüseyin. 2010. “Performance and Emission Analysis of Cottonseed oil Methyl Ester in a Diesel Engine.” Renewable Energy 35 (3): 588–592. doi: 10.1016/j.renene.2009.08.009
  • Aydına, Hüseyin, and Cumali İlkılıç. 2017. “Air Pollution, Pollutant Emissions and Harm Full Effects.” Journal of Engineering and Technology 1: 8–15.
  • Basumatary, Sanjay. 2015. “Yellow Oleander (Thevetia peruviana) Seed Oil Biodiesel as an Alternative and Renewable Fuel for Diesel Engines: A Review.” International Journal of ChemTech Research 7 (6): 2823–2840.
  • Bueno, A. V., M. P. Bento Pereira, J. V. Oliveira de Ponte, F. Tavares de Luna, and J. L. Cavalcante Jr. 2017. “Performance and Emissions Characteristics of Castor Oil Biodiesel Fuel Blends.” Applied Thermal Engineering 125: 559–566. doi: 10.1016/j.applthermaleng.2017.06.114
  • Caliskan, Hakan. 2017. “Environmental and enviro Economic Researches on Diesel Engines with Diesel and Biodiesel Fuels.” Journal of Cleaner Production 154: 125–129. doi: 10.1016/j.jclepro.2017.03.168
  • Celikten, Ismet, Atilla Koca, and Mehmet Ali Arslan. 2010. “Comparison of Performance and Emissions of Diesel Fuel, Rapeseed and Soybean oil Methyl Esters Injected at Different Pressures.” Renewable Energy 35: 814–820. doi: 10.1016/j.renene.2009.08.032
  • Chhabra, Mayank, Ajay Sharma, and Gaurav Dwivedi. 2016. “Performance Evaluation of Diesel Engine using Rice Bran Biodiesel.” Egyptian Journal of Petroleum 26 (2): 511–518. doi: 10.1016/j.ejpe.2016.07.002
  • Deep, Akash, Sarbjot Singh Sandhu, and Subhash Chander. 2017. “Experimental Investigations on the Influence of Fuel Injection Timing and Pressure on Single Cylinder C.I. Engine Fueled with 20% Blend of Castor Biodiesel in Diesel.” Fuel 210: 15–22. doi: 10.1016/j.fuel.2017.08.023
  • Gumus, M., and S. Kasifoglu. 2010. “Performance and Emission Evaluation of a Compression Ignition Engine using a Biodiesel (Apricot Seed Kernel Oil Methyl Ester) and its Blends with Diesel Fuel.” Biomass and Bioenergy 34: 134–139. doi: 10.1016/j.biombioe.2009.10.010
  • Heywood, John. B. 1988. Internal Combustion Engine Fundamentals. New York: Mc Graw Hill Co.
  • Ibiyemi, S. A., V. O. Fadipe, O. O. Akinremi, and S. S. Bako. 2002. “Variation in Oil Composition of Thevetia Peruviana Juss ‘Yellow Oleander’ Fruit Seeds.” Journal of Applied Sciences and Environmental Management 6 (2): 61–65. doi: 10.4314/jasem.v6i2.17178
  • Jagadish, Donepudi. 2017. “Effect of Fuel Injection Pressure on Performance of Constant-Speed Diesel Engine Fuelled with Biofuel Mixtures.” Biofuels 8 (5): 537–541. doi: 10.1080/17597269.2016.1236003
  • Jiaqiang, E., Minh Hieu Pham, Yuanwang Deng, Tuannghia Nguyen, Vinh Nguyen Duy, DucHieu Le, Wei Zuo, Qingguo Peng, and Zhiqing Zhang. 2018. “Effects of Injection Timing and Injection Pressure on Performance and Exhaust Emissions of a Common Rail Diesel Engine Fueled by Various Concentrations of Fish-oil Biodiesel Blends.” Energy 149: 979–989. doi: 10.1016/j.energy.2018.02.053
  • Jindal, S., B. P. Nandwana, N. S. Rathore, and V. Vashistha. 2010. “Experimental Investigation of the Effect of Compression Ratio and Injection Pressure in a Direct Injection Diesel Engine Running on Jatropha Methyl Ester.” Applied Thermal Engineering 30: 442–448. doi: 10.1016/j.applthermaleng.2009.10.004
  • Kakati, J., and T. K. Gogoi. 2016. “Biodiesel Production From Kutkura (Meyna Spinosa Roxb. Ex.) Fruit Seed oil: Its Characterization and Engine Performance Evaluation with 10% and 20% Blends.” Energy Conversion and Management 121: 152–161. doi: 10.1016/j.enconman.2016.05.019
  • Kannan, G. R., and R. Anand. 2012. “Effect of Injection Pressure and Injection Timing on DI Diesel Engine Fuelled with Biodiesel from Waste Cooking oil.” Biomass and Bioenergy 46: 443–352. doi: 10.1016/j.biombioe.2012.08.006
  • Khiari, K., S. Awad, K. Loubar, L. Tarabet, R. Mahmoud, and M. Tazerout. 2016. “Experimental Investigation of Pistacia Lentiscus Biodiesel as a Fuel for Direct Injection Diesel Engine.” Energy Conversion and Management 108: 392–399. doi: 10.1016/j.enconman.2015.11.021
  • Kumar, A., and K. A. Subramanian. 2017. “Control of Greenhouse Gas Emissions (CO2, CH4 and N2O) of a Biodiesel (B100) Fueled Automotive Diesel Engine Using Increased Compression Ratio.” Applied Thermal Engineering. doi:10.1016/j.applthermaleng.2017.08.015.
  • Kumar, Niraj, Varun, and Sant Ram Chauhan. 2015. “Evaluation of Endurance Characteristics for a Modified Diesel Engine Runs on Jatropha Biodiesel.” Applied Energy 155: 253–269. doi: 10.1016/j.apenergy.2015.05.110
  • Labecki, L., A. Cairns, J. Xia, A. Megaritis, H. Zhao, and L. C. Ganippa. 2014. “Combustion and Emission of Rapeseed oil Blends in Diesel Engine.” Applied Energy 95: 139–146. doi: 10.1016/j.apenergy.2012.02.026
  • Man, X. J., C. S. Cheung, Z. Ning, L. Wei, and Z. H. Huang. 2016. “Influence of Engine Load and Speed on Regulated and Unregulated Emissions of a Diesel Engine Fueled with Diesel Fuel Blended with Waste Cooking oil Biodiesel.” Fuel 180: 41–49. doi: 10.1016/j.fuel.2016.04.007
  • Mohan, B., W. Yang, V. Raman, V. Sivasankaralingam, and S. K. Chou. 2014. “Optimization of Biodiesel Fueled Engine to Meet Emission Standards Through Varying Nozzle Opening Pressure and Static Injection Timing.” Applied Energy 130: 450–457. doi: 10.1016/j.apenergy.2014.02.033
  • Nanthagopal, K., B. Ashok, and R. Thundil Karuppa Raj. 2016. “Influence of Fuel Injection Pressures on Calophyllum Inophyllum Methyl Ester Fuelled Direct Injection Diesel Engine.” Energy Conversion and Management 116: 165–173. doi: 10.1016/j.enconman.2016.03.002
  • Prabhu, L., S. Sathish Kumar, M. Prabhahar, and K. Rajan. 2013. “Combustion, Performance and Emission Characteristics of Diesel Engine with Neem oil Methyl Ester and its Diesel Blends.” American Journal of Applied Sciences 10 (8): 810–818. doi: 10.3844/ajassp.2013.810.818
  • Rajan, K., and K. R. Senthil Kumar. 2010. “Performance and Emission Characteristics of a Diesel Engine with Internal jet Piston using Jatropha oil Methyl Eater.” International Journal of Energy Studies 67 (4): 557–566.
  • Ranganathan, L., and S. Sampath. 2011. “Study of the Performance and Emission Characteristics of a Diesel Engine Using Cotton Seed Oil-Based Fuels.” International Journal of Ambient Energy 32 (3): 124–133. doi: 10.1080/01430750.2011.613607
  • Ravichandran, A., K. Rajan, and K. R. Senthil Kumar. 2017. “Effect of Piston Bowl Geometry and Different Injection Pressure on the Performance, Emission, and Combustion Characteristics of Diesel Engine Using Biodiesel Blend.” Thermal Science 22 (3): 1445–1446.
  • Saravanan, N., G. Nagarajan, and P. Sukumar. 2010. “Experimental Investigation on a DI Diesel Engine Fuelled with Madhuca Indica Ester and Diesel Blend.” Biomass and Bio Energy 34: 838–843. doi: 10.1016/j.biombioe.2010.01.028
  • Senthil Kumar, S., K. Purushothaman, and K. Rajan. 2016. “Performance Analysis of Compression Ignition Engine Using Rubber Seed oil Methyl Ester Blend with the Effect of Various Injection Pressures.” Thermal Science 20 (S4): 1083–1090. doi: 10.2298/TSCI16S4083S
  • Shehata, M. S., A. M. Attia, and S. A. Razek. 2015. “Corn and Soybean Biodiesel Blends as Alternative Fuels for Diesel Engine at Different Injection Pressures.” Fuel 161: 49–58. doi: 10.1016/j.fuel.2015.08.037
  • Solaimuthu, C., and P. Govindarajan. 2012. “Effect of Injection Timing on the Performance, Combustion and Emission Characteristics of Diesel Engine Using Mahua Oil Methyl Ester in Different Volumetric Proportions as Fuel.” Journal of Scientific and Industrial Research 71: 69–74.
  • Solamuthu, C., V. Raghavan, D. Senthilkumar, and C. G. Saravanan. 2015. “Experimental Investigation of Evaporation Rate and Emission Studies of Madhuca Indica Biodiesel and its Blend with Diesel.” International Journal of Green Energy 12 (6): 635–640. doi: 10.1080/15435075.2013.871723

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.