389
Views
18
CrossRef citations to date
0
Altmetric
Reviews

Optimisation of combined cooling, heating and power (CCHP) systems incorporating the solar and geothermal energy: a review study

, , ORCID Icon, , &
Pages 42-60 | Received 27 Nov 2018, Accepted 15 May 2019, Published online: 20 Jun 2019

References

  • Abdollahi, G., and H. Sayyaadi. 2013. “Application of the Multi-Objective Optimization and Risk Analysis for the Sizing of a Residential Small-Scale CCHP System.” Energy and Buildings 60: 330–344.
  • Action Energy. 2004. Combined Heat and Power for Buildings: Good Practice Guide (GPG388). London: Carbon Trust.
  • Ahmadi, P., I. Dincer, and M. A. Rosen. 2012. “Exergo-Environmental Analysis of an Integrated Organic Rankine Cycle for Trigeneration.” Energy Conversion and Management 64: 447–453.
  • Ahmadi, P., I. Dincer, and M. A. Rosen. 2014. “Multi-Objective Optimization of a Novel Solar-Based Multigeneration Energy System.” Solar Energy 108: 576–591.
  • Ahmadi, P., M. A. Rosen, and I. Dincer. 2011. “Greenhouse Gas Emission and Exergo-Environmental Analyses of a Trigeneration Energy System.” International Journal of Greenhouse Gas Control 5 (6): 1540–1549.
  • Alavy, M., H. V. Nguyen, W. H. Leong, and S. B. Dworkin. 2013. “A Methodology and Computerized Approach for Optimizing Hybrid Ground Source Heat Pump System Design.” Renewable Energy 57: 404–412.
  • Alim, M. A., Z. Abdin, R. Saidur, A. Hepbasli, M. A. Khairul, and N. A. Rahim. 2013. “Analyses of Entropy Generation and Pressure Drop for a Conventional Flat Plate Solar Collector Using Different Types of Metal Oxide Nanofluids.” Energy and Buildings 66: 289–296.
  • Alonso, M., H. Amaris, and C. Alvarez-Ortega. 2012. “Integration of Renewable Energy Sources in Smart Grids by Means of Evolutionary Optimization Algorithms.” Expert Systems With Applications 39 (5): 5513–5522.
  • Al-Sulaiman, F. A., I. Dincer, and F. Hamdullahpur. 2010. “Exergy Analysis of an Integrated Solid Oxide Fuel Cell and Organic Rankine Cycle for Cooling, Heating and Power Production.” Journal of Power Sources 195 (8): 2346–2354.
  • Al-Sulaiman, F. A., F. Hamdullahpur, and I. Dincer. 2011a. “Greenhouse Gas Emission and Exergy Assessments of an Integrated Organic Rankine Cycle With a Biomass Combustor for Combined Cooling, Heating and Power Production.” Applied Thermal Engineering 31 (4): 439–446.
  • Al-Sulaiman, F. A., F. Hamdullahpur, and I. Dincer. 2011b. “Performance Comparison of Three Trigeneration Systems Using Organic Rankine Cycles.” Energy 36 (9): 5741–5754.
  • Angrisani, G., A. Rosato, C. Roselli, M. Sasso, and S. Sibilio. 2012. “Experimental Results of a Micro-Trigeneration Installation.” Applied Thermal Engineering 38: 78–90.
  • Ascione, F., M. Canelli, R. F. De Masi, M. Sasso, and G. P. Vanoli. 2014. “Combined Cooling, Heating and Power for Small Urban Districts: An Italian Case-Study.” Applied Thermal Engineering 71 (2): 705–713.
  • Badami, M., and A. Portoraro. 2009. “Performance Analysis of an Innovative Small-Scale Trigeneration Plant With Liquid Desiccant Cooling System.” Energy and Buildings 41 (11): 1195–1204.
  • Badami, M., A. Portoraro, and G. Ruscica. 2012. “Analysis of Trigeneration Plants: Engine With Liquid Desiccant Cooling and Micro Gas Turbine With Absorption Chiller.” International Journal of Energy Research 36 (5): 579–589.
  • Badescu, V. 2002. “First and Second Law Analysis of a Solar Assisted Heat Pump Based Heating System.” Energy Conversion and Management 43 (18): 2539–2552.
  • Behboodi Kalhori, S., H. Rabiei, and Z. Mansoori. 2012. “Mashad Trigeneration Potential – An Opportunity for CO2 Abatement in Iran.” Energy Conversion and Management 60: 106–114.
  • Beihong, Z., and L. Weiding. 2006. “An Optimal Sizing Method for Cogeneration Plants.” Energy and Buildings 38 (3): 189–195.
  • Bejan, A. 1982. “Second-Law Analysis in Heat Transfer and Thermal Design.” Advances in Heat Transfer 15: 1–58.
  • Bejan, A. 1989. “Theory of Heat Transfer-Irreversible Refrigeration Plants.” International Journal of Heat and Mass Transfer 32 (9): 1631–1639.
  • Bidar, F. S. B. 2018. “Energy and Exergo-Economic Assessments of Gas Turbine Based CHP Systems: A Case Study of SPGC Utility Plant.” Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 37 (5): 209–223.
  • Bodvarsson, G., and D. E. Eggers. 1972. “The Exergy of Thermal Water.” Geothermics 1 (3): 93–95.
  • Boyaghchi, F. A., and M. Chavoshi. 2017. “Multi-Criteria Optimization of a Micro Solar-Geothermal CCHP System Applying Water/CuO Nanofluid Based on Exergy, Exergoeconomic and Exergoenvironmental Concepts.” Applied Thermal Engineering 112: 660–675.
  • Boyaghchi, F. A., M. Chavoshi, and V. Sabeti. 2015. “Optimization of a Novel Combined Cooling, Heating and Power Cycle Driven by Geothermal and Solar Energies Using the Water/CuO (Copper Oxide) Nanofluid.” Energy 91: 685–699.
  • Bracco, S., G. Dentici, and S. Siri. 2013. “Economic and Environmental Optimization Model for the Design and the Operation of a Combined Heat and Power Distributed Generation System in an Urban Area.” Energy 55: 1014–1024.
  • Bridges, B. D., D. S. Harshbarger, and C. W. Bullard. 2001. “Second Law Analysis of Refrigerators and Air Conditioners.” ASHRAE Transactions 107: 644–651.
  • Caliano, M., N. Bianco, G. Graditi, and L. Mongibello. 2017. “Design Optimization and Sensitivity Analysis of a Biomass-Fired Combined Cooling, Heating and Power System With Thermal Energy Storage Systems.” Energy Conversion and Management 149: 631–645.
  • Calise, F., M. D. d’Accadia, and L. Vanoli. 2012. “Design and Dynamic Simulation of a Novel Solar Trigeneration System Based on Hybrid Photovoltaic/Thermal Collectors (PVT).” Energy Conversion and Management 60: 214–225.
  • Calva, E. T., M. P. Núñez, and M. A. R. Toral. 2005. “Thermal Integration of Trigeneration Systems.” Applied Thermal Engineering 25 (7): 973–984.
  • Cardona, E., and A. Piacentino. 2003. “A Methodology for Sizing a Trigeneration Plant in Mediterranean Areas.” Applied Thermal Engineering 23 (13): 1665–1680.
  • Cardona, E., A. Piacentino, and F. Cardona. 2006. “Matching Economical, Energetic and Environmental Benefits: An Analysis for Hybrid CHCP-Heat Pump Systems.” Energy Conversion and Management 47 (20): 3530–3542.
  • Cervantes, J., and E. Torres-Reyes. 2002. “Experiments on a Solar-Assisted Heat Pump and an Exergy Analysis of the System.” Applied Thermal Engineering 22 (12): 1289–1297.
  • Chacartegui, R., D. Sánchez, J. M. Muñoz, and T. Sánchez. 2009. “Alternative ORC Bottoming Cycles for Combined Cycle Power Plants.” Applied Energy 86 (10): 2162–2170.
  • Chamra, L. M., and P. J. Mago. 2009. Micro-CHP Power Generation for Residential and Small Commercial Buildings. New York: Nova Science Publishers.
  • Chen, L., H. Feng, and F. Sun. 2011. “Exergoeconomic Performance Optimization for a Combined Cooling, Heating and Power Generation Plant With an Endoreversible Closed Brayton Cycle.” Mathematical and Computer Modelling 54 (11–12): 2785–2801.
  • Chen, L. G., H. J. Feng, and F. R. Sun. 2013. “Exergy Optimisation of Irreversible Closed Brayton Cycle Combined Cooling, Heating and Power Plant.” Journal of the Energy Institute 86 (2): 97–106.
  • Chen, L., G. Tao, and F. Sun. 2012. “Finite-Time Exergoeconomic Optimal Performance for an Irreversible Gas Turbine Closed-Cycle Cogeneration Plant.” International Journal of Sustainable Energy 31 (1): 43–58.
  • Chen, L., B. Yang, H. Feng, and Z. Ding. 2017. “Modelling, Analyses and Optimization for Exergy Performance of an Irreversible Intercooled Regenerated Brayton CHP Plant: Part 1 — Thermodynamic Modelling and Parametric Analyses.” ASME International Mechanical Engineering Congress & Exposition (IMECE) Conference, Tampa, FL, November 3–9. Paper No. IMECE2017-70045.
  • Chicco, G., and P. Mancarella. 2006. “From Cogeneration to Trigeneration: Profitable Alternatives in a Competitive Market.” IEEE Transactions on Energy Conversion 21 (1): 265–272.
  • Chicco, G., and P. Mancarella. 2008. “Assessment of the Greenhouse Gas Emissions from Cogeneration and Trigeneration Systems. Part I: Models and Indicators.” Energy 33 (3): 410–417.
  • Cho, H., R. Luck, and L. M. Chamra. 2010. “Supervisory Feed-Forward Control for Real-Time Topping Cycle CHP Operation.” Journal of Energy Resources Technology 132 (1): 012401.
  • Cho, H., R. Luck, S. D. Eksioglu, and L. M. Chamra. 2009. “Cost-Optimized Real-Time Operation of CHP Systems.” Energy and Buildings 41 (4): 445–451.
  • Cho, H., P. J. Mago, R. Luck, and L. M. Chamra. 2009. “Evaluation of CCHP Systems Performance Based on Operational Cost, Primary Energy Consumption, and Carbon Dioxide Emission by Utilizing an Optimal Operation Scheme.” Applied Energy 86 (12): 2540–2549.
  • Cho, H., A. D. Smith, and P. Mago. 2014. “Combined Cooling, Heating and Power: A Review of Performance Improvement and Optimization.” Applied Energy 136: 168–185.
  • Chua, K. J., W. M. Yang, T. Z. Wong, and C. A. Ho. 2012. “Integrating Renewable Energy Technologies to Support Building Trigeneration – A Multi-Criteria Analysis.” Renewable Energy 41: 358–367.
  • Combined Heat and Power (CHP) in United States, NEMW (North East Middle West Institute) Research Institute. Available at Energy Advantage Website, http://www.nemw.org.
  • Cuviella-Suárez, C., A. Colmenar-Santos, and M. Castro-Gil. 2012. “Tri-Generation System to Couple Production to Demand in a Combined Cycle.” Energy 40 (1): 271–290.
  • Dikici, A., and A. Akbulut. 2008. “Performance Characteristics and Energy–Exergy Analysis of Solar-Assisted Heat Pump System.” Building and Environment 43 (11): 1961–1972.
  • Dincer, I., and M. A. Rosen. 2004. “Exergy as a Driver for Achieving Sustainability.” International Journal of Green Energy 1 (1): 1–19.
  • DiPippo, R. 1991. “Geothermal Energy Electricity Generation and Environmental Impact.” Energy Policy 19 (8): 798–807.
  • DiPippo, R. 2004. “Second Law Assessment of Binary Plants Generating Power from Low-Temperature Geothermal Fluids.” Geothermics 33 (5): 565–586.
  • DiPippo, R., and D. F. Marcille. 1984. “Exergy Analysis of Geothermal Power Plants.” Geothermal Resources Council Transactions 8: 47–52.
  • Ebrahimi, M., A. Keshavarz, and A. Jamali. 2012. “Energy and Exergy Analyses of a Micro-Steam CCHP Cycle for a Residential Building.” Energy and Buildings 45: 202–210.
  • El-Emam, R. S., and I. Dincer. 2013. “Exergy and Exergoeconomic Analyses and Optimization of Geothermal Organic Rankine Cycle.” Applied Thermal Engineering 59 (1–2): 435–444.
  • Environmental Protection Agency. 2008. Catalog of CHP Technologies.
  • Esen, H., M. Inalli, and M. Esen. 2006. “Technoeconomic Appraisal of a Ground Source Heat Pump System for a Heating Season in Eastern Turkey.” Energy Conversion and Management 47 (9–10): 1281–1297.
  • Esen, M., and T. Yuksel. 2013. “Experimental Evaluation of Using Various Renewable Energy Sources for Heating a Greenhouse.” Energy and Buildings 65: 340–351.
  • Espirito Santo, D. B. 2012. “Energy and Exergy Efficiency of a Building Internal Combustion Engine Trigeneration System Under Two Different Operational Strategies.” Energy and Buildings 53: 28–38.
  • Fadaee, M., and M. A. M. Radzi. 2012. “Multi-Objective Optimization of a Stand-Alone Hybrid Renewable Energy System by Using Evolutionary Algorithms: A Review.” Renewable and Sustainable Energy Reviews 16 (5): 3364–3369.
  • Faizal, M., R. Saidur, S. Mekhilef, and M. A. Alim. 2013. “Energy, Economic and Environmental Analysis of Metal Oxides Nanofluid for Flat-Plate Solar Collector.” Energy Conversion and Management 76: 162–168.
  • Fang, F., L. Wei, J. Liu, J. Zhang, and G. Hou. 2012. “Complementary Configuration and Operation of a CCHP-ORC System.” Energy 46 (1): 211–220.
  • Feng, H., L. Chen, and F. Sun. 2011. “Exergoeconomic Optimal Performance of an Irreversible Closed Brayton Cycle Combined Cooling, Heating and Power Plant.” Applied Mathematical Modelling 35 (9): 4661–4673.
  • Feng, H., L. Chen, Z. Xie, and Y. Ge. 2017. “Maximum Exergy Output Rate for an Endoreversible Closed Brayton Cycle Combined Cooling, Heating and Power Plant.” Proceeding of Second Thermal and Fluids Engineering Conference, 1205–1217.
  • Fraisse, G., C. Ménézo, and K. Johannes. 2007. “Energy Performance of Water Hybrid PV/T Collectors Applied to Combisystems of Direct Solar Floor Type.” Solar Energy 81 (11): 1426–1438.
  • Fumo, N., P. J. Mago, and L. M. Chamra. 2008. “Cooling, Heating, and Power Energy Performance for System Feasibility.” Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 222 (4): 347–354.
  • Fumo, N., P. J. Mago, and L. M. Chamra. 2009. “Emission Operational Strategy for Combined Cooling, Heating, and Power Systems.” Applied Energy 86 (11): 2344–2350.
  • Gao, L., H. Wu, H. Jin, and M. Yang. 2008. “System Study of Combined Cooling, Heating and Power System for Eco-Industrial Parks.” International Journal of Energy Research 32 (12): 1107–1118.
  • Ghaebi, H., M. Amidpour, S. Karimkashi, and O. Rezayan. 2011. “Energy, Exergy and Thermoeconomic Analysis of a Combined Cooling, Heating and Power (CCHP) System With Gas Turbine Prime Mover.” International Journal of Energy Research 35 (8): 697–709.
  • Ghaebi, H., M. H. Saidi, and P. Ahmadi. 2012. “Exergoeconomic Optimization of a Trigeneration System for Heating, Cooling and Power Production Purpose Based on TRR Method and Using Evolutionary Algorithm.” Applied Thermal Engineering 36: 113–125.
  • Gordon, J. M., and K. Choon Ng. 2000. “High-Efficiency Solar Cooling.” Solar Energy 68 (1): 23–31.
  • Goswami, D. Yogi. 1998. “Solar Thermal Power Technology: Present Status and Ideas for the Future.” Energy Sources 20 (2): 137–145.
  • Grimm, A. 1993. Powdered Aluminum-Containing Heat Transfer Fluids. German Patent DE 4131516 A1.
  • Gu, Q., H. Ren, W. Gao, and J. Ren. 2012. “Integrated Assessment of Combined Cooling Heating and Power Systems Under Different Design and Management Options for Residential Buildings in Shanghai.” Energy and Buildings 51: 143–152.
  • Gu, Z., and H. Sato. 2002. “Performance of Supercritical Cycles for Geothermal Binary Design.” Energy Conversion and Management 43 (7): 961–971.
  • Guo, L., W. Liu, J. Cai, B. Hong, and C. Wang. 2013. “A Two-Stage Optimal Planning and Design Method for Combined Cooling, Heat and Power Microgrid System.” Energy Conversion and Management 74: 433–445.
  • Haeseldonckx, D., and W. D’haeseleer. 2008. “The Environmental Impact of Decentralised Generation in an Overall System Context.” Renewable and Sustainable Energy Reviews 12 (2): 437–454.
  • Harrod, J., P. J. Mago, and R. Luck. 2012. “Sizing Analysis of a Combined Cooling, Heating, and Power System for a Small Office Building Using a Wood Waste Biomass-Fired Stirling Engine.” International Journal of Energy Research 36 (1): 64–74.
  • Hasan, A. A., D. Y. Goswami, and S. Vijayaraghavan. 2002. “First and Second Law Analysis of a New Power and Refrigeration Thermodynamic Cycle Using a Solar Heat Source.” Solar Energy 73 (5): 385–393.
  • Hasanzadeh, B. 2011. “Study and Analysis of Steam Production Systems in Micro Dimensions.” MSc. Dissertation., Khajeh Nasir Toosi University of Technology.
  • Henze, G. P., B. Biffar, D. Kohn, and M. P. Becker. 2008. “Optimal Design and Operation of a Thermal Storage System for a Chilled Water Plant Serving Pharmaceutical Buildings.” Energy and Buildings 40 (6): 1004–1019.
  • Hiharat, E. 2001. “An Availability Analysis of Heat Pumps.” Proceedings of thermal engineering conference 2001: 649–652.
  • Hosseini, M., I. Dincer, and M. A. Rosen. 2013. “Hybrid Solar–Fuel Cell Combined Heat and Power Systems for Residential Applications: Energy and Exergy Analyses.” Journal of Power Sources 221: 372–380.
  • Hu, M., and H. Cho. 2014. “A Probability Constrained Multi-Objective Optimization Model for CCHP System Operation Decision Support.” Applied Energy 116: 230–242.
  • Huangfu, Y., J. Y. Wu, R. Z. Wang, X. Q. Kong, and B. H. Wei. 2007. “Evaluation and Analysis of Novel Micro-Scale Combined Cooling, Heating and Power (MCCHP) System.” Energy Conversion and Management 48 (5): 1703–1709.
  • IEA. 2007. Combined Heat and Power: Evaluating the Benefits of Greater Global Investment. Paris: International Energy Agency.
  • IEA. 2008. Combined Heat and Power: Evaluating the Benefits of Greater Global Investment. Paris: International Energy Agency.
  • Invernizzi, C., P. Iora, and P. Silva. 2007. “Bottoming Micro-Rankine Cycles for Micro-Gas Turbines.” Applied Thermal Engineering 27 (1): 100–110.
  • Jabbari, B., N. Tahouni, A. Ataei, and M. H. Panjeshahi. 2013. “Design and Optimization of CCHP System Incorporated Into Kraft Process, Using Pinch Analysis With Pressure Drop Consideration.” Applied Thermal Engineering 61 (1): 88–97.
  • Jing, Y.-Y., H. Bai, and J.-J. Wang. 2012a. “A Fuzzy Multi-Criteria Decision-Making Model for CCHP Systems Driven by Different Energy Sources.” Energy Policy 42: 286–296.
  • Jing, Y.-Y., H. Bai, and J.-J. Wang. 2012b. “Multi-Objective Optimization Design and Operation Strategy Analysis of BCHP System Based on Life Cycle Assessment.” Energy 37 (1): 405–416.
  • Jing, Y.-Y., H. Bai, J.-J. Wang, and L. Liu. 2012. “Life Cycle Assessment of a Solar Combined Cooling Heating and Power System in Different Operation Strategies.” Applied Energy 92: 843–853.
  • Joshi, A. S., and A. Tiwari. 2007. “Energy and Exergy Efficiencies of a Hybrid Photovoltaic–Thermal (PV/T) Air Collector.” Renewable Energy 32 (13): 2223–2241.
  • Kalogirou, S. A., and Y. Tripanagnostopoulos. 2006. “Hybrid PV/T Solar Systems for Domestic Hot Water and Electricity Production.” Energy Conversion and Management 47 (18–19): 3368–3382.
  • Kanoglu, M. 2002. “Exergy Analysis of a Dual-Level Binary Geothermal Power Plant.” Geothermics 31 (6): 709–724.
  • Kanoglu, M., and A. Bolatturk. 2008. “Performance and Parametric Investigation of a Binary Geothermal Power Plant by Exergy.” Renewable Energy 33 (11): 2366–2374.
  • Kanoğlu, M., and Y. A. Çengel. 1999a. “Improving the Performance of an Existing Air-Cooled Binary Geothermal Power Plant: A Case Study.” Journal of Energy Resources Technology 121 (3): 196.
  • Kanoğlu, M., and Y. A. Çengel. 1999b. “Retrofitting a Geothermal Power Plant to Optimize Performance: A Case Study.” Journal of Energy Resources Technology 121 (4): 295.
  • Kanoğlu, M., Y. A. Çengel, and R. H. Turner. 1998. “Incorporating a District Heating/Cooling System Into an Existing Geothermal Power Plant.” Journal of Energy Resources Technology 120 (2): 179.
  • Kavvadias, K. C., and Z. B. Maroulis. 2010. “Multi-Objective Optimization of a Trigeneration Plant.” Energy Policy 38 (2): 945–954.
  • Kaygusuz, K., and T. Ayhan. 1993. “Exergy Analysis of Solar-Assisted Heat-Pump Systems for Domestic Heating.” Energy 18 (10): 1077–1085.
  • Kestin, J. 1978. “Available Work in Geothermal Energy.”
  • Khorasaninejad, E., and H. Hajabdollahi. 2014. “Thermo-Economic and Environmental Optimization of Solar Assisted Heat Pump by Using Multi-Objective Particle Swam Algorithm.” Energy 72: 680–690.
  • Knizley, A. A., P. J. Mago, and A. D. Smith. 2014. “Evaluation of the Performance of Combined Cooling, Heating, and Power Systems With Dual Power Generation Units.” Energy Policy 66: 654–665.
  • Konak, A., D. W. Coit, and A. E. Smith. 2006. “Multi-Objective Optimization Using Genetic Algorithms: A Tutorial.” Reliability Engineering & System Safety 91 (9): 992–1007.
  • Kong, X. Q., R. Z. Wang, and X. H. Huang. 2004. “Energy Efficiency and Economic Feasibility of CCHP Driven by Stirling Engine.” Energy Conversion and Management 45 (9–10): 1433–1442.
  • Kong, X. Q., R. Z. Wang, and X. H. Huang. 2005. “Energy Optimization Model for a CCHP System With Available Gas Turbines.” Applied Thermal Engineering 25 (2–3): 377–391.
  • Lahdelma, R., and H. Hakonen. 2003. “An Efficient Linear Programming Algorithm for Combined Heat and Power Production.” European Journal of Operational Research 148 (1): 141–151.
  • Layek, A., J. S. Saini, and S. C. Solanki. 2007. “Second Law Optimization of a Solar Air Heater Having Chamfered Rib–Groove Roughness on Absorber Plate.” Renewable Energy 32 (12): 1967–1980.
  • Lee, K. C. 2001. “Classification of Geothermal Resources by Exergy.” Geothermics 30 (4): 431–442.
  • Lelea, D. 2011. “The Performance Evaluation of Al2O3/Water Nanofluid Flow and Heat Transfer in Microchannel Heat Sink.” International Journal of Heat and Mass Transfer 54 (17–18): 3891–3899.
  • Li, H., L. Fu, K. Geng, and Y. Jiang. 2006. “Energy Utilization Evaluation of CCHP Systems.” Energy and Buildings 38 (3): 253–257.
  • Li, C. Z., Y. M. Shi, and X. H. Huang. 2008. “Sensitivity Analysis of Energy Demands on Performance of CCHP System.” Energy Conversion and Management 49 (12): 3491–3497.
  • Li, C.-Z., Y.-M. Shi, S. Liu, Z. Zheng, and Y. Liu. 2010. “Uncertain Programming of Building Cooling Heating and Power (BCHP) System Based on Monte-Carlo Method.” Energy and Buildings 42 (9): 1369–1375.
  • Li, Y., X. Wang, D. Li, and Y. Ding. 2012. “A Trigeneration System Based on Compressed Air and Thermal Energy Storage.” Applied Energy 99: 316–323.
  • Li, M., J. Wang, S. Li, X. Wang, W. He, and Y. Dai. 2014. “Thermo-Economic Analysis and Comparison of a CO2 Transcritical Power Cycle and an Organic Rankine Cycle.” Geothermics 50: 101–111.
  • Liu, M., Y. Shi, and F. Fang. 2012. “A New Operation Strategy for CCHP Systems With Hybrid Chillers.” Applied Energy 95: 164–173.
  • Lozano, M. A., M. Carvalho, and L. M. Serra. 2009. “Operational Strategy and Marginal Costs in Simple Trigeneration Systems.” Energy 34 (11): 2001–2008.
  • Lu, L., Z.-H. Liu, and H.-S. Xiao. 2011. “Thermal Performance of an Open Thermosyphon Using Nanofluids for High-Temperature Evacuated Tubular Solar Collectors.” Solar Energy 85 (2): 379–387.
  • Lund, J. W., and L. B. Tonya. 2015. “Direct Utilization of Geothermal Energy 2015 Worldwide Review.” Proceedings world geothermal congress 2015, international geothermal association, Melbourne, Australia, April 19–25. PMid:25886524 PMCid:PMC4382830.
  • Mago, P. J., and L. M. Chamra. 2009. “Analysis and Optimization of CCHP Systems Based on Energy, Economical, and Environmental Considerations.” Energy and Buildings 41 (10): 1099–1106.
  • Mago, P. J., N. Fumo, and L. M. Chamra. 2009. “Performance Analysis of CCHP and CHP Systems Operating Following the Thermal and Electric Load.” International Journal of Energy Research 33 (9): 852–864.
  • Mago, P. J., and A. K. Hueffed. 2010. “Evaluation of a Turbine Driven CCHP System for Large Office Buildings Under Different Operating Strategies.” Energy and Buildings 42 (10): 1628–1636.
  • Masuda, H., A. Ebata, K. Teramae, and N. Hishinuma. 1993. “Alteration of Thermal Conductivity and Viscosity of Liquid by Dispersing Ultra-Fine Particles. Dispersion of Al2O3, SiO2 and TiO2 Ultra-Fine Particles.” Netsu Bussei 7 (4): 227–233.
  • Mertoglu, O., S. Simsek, and N. Basarir. 2015. “Geothermal Country Update Report of Turkey (2010–2015).” Proceedings world geothermal congress 2015, international geothermal association, Melbourne, Australia, April 19–25.
  • Mittelman, G., A. Kribus, and A. Dayan. 2007. “Solar Cooling With Concentrating Photovoltaic/Thermal (CPVT) Systems.” Energy Conversion and Management 48 (9): 2481–2490.
  • Moghaddami, M., A. Mohammadzade, and S. A. V. Esfehani. 2011. “Second Law Analysis of Nanofluid Flow.” Energy Conversion and Management 52 (2): 1397–1405.
  • Mohammadi, A., and M. Mehrpooya. 2017. “Energy and Exergy Analyses of a Combined Desalination and CCHP System Driven by Geothermal Energy.” Applied Thermal Engineering 116: 685–694.
  • Mohanty, B., and G. Paloso. 1992. “Economic Power Generation from Low-Temperature Geothermal Resources Using Organic Rankine Cycle Combined With Vapour Absorption Chiller.” Heat Recovery Systems and CHP 12 (2): 143–158.
  • Montagud, C., J. M. Corberán, and F. Ruiz-Calvo. 2013. “Experimental and Modeling Analysis of a Ground Source Heat Pump System.” Applied Energy 109: 328–336.
  • Nakanishi, S., Y. Kawashima, and K. Murai. 1993. “Thermodynamic Analyses of Performance of Heat Pumps and Refrigerators. Part 1: Exergy Analysis of COP Ratio as a Performance Index.” Transactions of JAR 10 (1): 1–9. PMid:8513448.
  • Natarajan, E., and R. Sathish. 2009. “Role of Nanofluids in Solar Water Heater.” The International Journal of Advanced Manufacturing Technology 45: 1–15.
  • Noorpoor, F. M. A. 2017. “Conventional and Advanced Exergetic and Exergoeconomic Analysis Applied to an Air Preheater System for Fired Heater (Case Study: Tehran Oil Refinery Company).” Iranian Journal of Chemistry and Chemical Engineering (IJCCE) 37 (4): 205–219.
  • Ozturk, H. K., O. Atalay, A. Yilanci, and A. Hepbasli. 2006. “Energy and Exergy Analysis of Kizildere Geothermal Power Plant, Turkey.” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 28 (15): 1415–1424.
  • Pandey, S. D., and V. K. Nema. 2012. “Experimental Analysis of Heat Transfer and Friction Factor of Nanofluid as a Coolant in a Corrugated Plate Heat Exchanger.” Experimental Thermal and Fluid Science 38: 248–256.
  • Parida, B., S. Iniyan, and R. Goic. 2011. “A Review of Solar Photovoltaic Technologies.” Renewable and Sustainable Energy Reviews 15 (3): 1625–1636.
  • Park, H., J. S. Lee, W. Kim, and Y. Kim. 2012. “Performance Optimization of a Hybrid Ground Source Heat Pump With the Parallel Configuration of a Ground Heat Exchanger and a Supplemental Heat Rejecter in the Cooling Mode.” International Journal of Refrigeration 35 (6): 1537–1546.
  • Petela, R. 2005. “Exergy Analysis of the Solar Cylindrical-Parabolic Cooker.” Solar Energy 79 (3): 221–233.
  • Piechowski, M. 1996. “A Ground Coupled Heat Pump System With Energy Storage.” PhD Thesis., University of Melbourne, Australia.
  • Rayegan, R. 2011. “Exergoeconomic Analysis of Solar Organic Rankine Cycle for Geothermal Air Conditioned Net Zero Energy Buildings.” PhD diss., Florida International University.
  • Riffat, S. B., and X. Zhao. 2004. “A Novel Hybrid Heat Pipe Solar Collector/CHP System—Part 1: System Design and Construction.” Renewable Energy 29 (15): 2217–2233.
  • Rong, A., and R. Lahdelma. 2005. “An Efficient Linear Programming Model and Optimization Algorithm for Trigeneration.” Applied Energy 82 (1): 40–63.
  • Sakawa, M., K. Kato, and S. Ushiro. 2000. “Operation Planning of District Heating and Cooling Plants Using Genetic Algorithms for Mined 0-1 Linear Programming.” 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies and Industrial Opportunities (Cat. No.00CH37141) 4: 2915–2920.
  • Sanaye, S., and B. Niroomand. 2009. “Thermal-Economic Modeling and Optimization of Vertical Ground-Coupled Heat Pump.” Energy Conversion and Management 50 (4): 1136–1147.
  • Sanaye, S., and S. Shokrollahi. 2004. “Selection and Sizing of Prime Movers in Combined Heat and Power Systems.” Volume 4: Turbo Expo 2004: 613–621.
  • Savic, D., and D. Savic. 2002. “Single-objective vs. Multiobjective Optimisation for Integrated Decision Support, In: Integrated Assessment and Decision.” Proceedings of the First Biennial Meeting of the International Environmental Modelling and Software Society 1: 7–12.
  • Sedaghat, A., and H. Kian. 2016. “Multi-Criteria Optimization of a Solar Cooling System Assisted Ground Source Heat Pump System.” Modares Mechanical Engineering 16 (1): 51–62.
  • Shi, B., L.-X. Yan, and W. Wu. 2013. “Multi-Objective Optimization for Combined Heat and Power Economic Dispatch With Power Transmission Loss and Emission Reduction.” Energy 56: 135–143.
  • Smith, M. A., and P. C. Few. 2001. “Second Law Analysis of an Experimental Domestic Scale Co-Generation Plant Incorporating a Heat Pump.” Applied Thermal Engineering 21 (1): 93–110.
  • Sundberg, G., and D. Henning. 2002. “Investments in Combined Heat and Power Plants: Influence of Fuel Price on Cost Minimised Operation.” Energy Conversion and Management 43 (5): 639–650.
  • Tamm, G., D. Goswami, S. Lu, and A. Hasan. 2004. “Theoretical and Experimental Investigation of an Ammonia–Water Power and Refrigeration Thermodynamic Cycle.” Solar Energy 76 (1–3): 217–228.
  • Tao, G. S., L. G. Chen, and F. R. Sun. 2009. “Exergoeconomic Performance Optimization for an Endoreversible Regenerative Gas Turbine Closed–Cycle Cogeneration Plant.” Revista mexicana de física 55 (3): 192–200.
  • Tao, G., L. Chen, F. Sun, and C. Wu. 2009. “Exergoeconomic Performance Optimisation for an Endoreversible Simple Gas Turbine Cycle Cogeneration Plant.” International Journal of Ambient Energy 30 (3): 115–124.
  • Thorin, E., H. Brand, and C. Weber. 2005. “Long-Term Optimization of Cogeneration Systems in a Competitive Market Environment.” Applied Energy 81 (2): 152–169.
  • Tichi, S. G., M. M. Ardehali, and M. E. Nazari. 2010. “Examination of Energy Price Policies in Iran for Optimal Configuration of CHP and CCHP Systems Based on Particle Swarm Optimization Algorithm.” Energy Policy 38 (10): 6240–6250.
  • Torres-Reyes, E., and J. Cervantes de Gortari. 2001. “Optimal Performance of an Irreversible Solar-Assisted Heat Pump.” Exergy, An International Journal 1 (2): 107–111.
  • Torres-Reyes, E., M. Picon Nuñez, and J. Cervantes de Gortari. 1998. “Exergy Analysis and Optimization of a Solar-Assisted Heat Pump.” Energy 23 (4): 337–344.
  • Tripanagnostopoulos, Y., T. Nousia, M. Souliotis, and P. Yianoulis. 2002. “Hybrid Photovoltaic/Thermal Solar Systems.” Solar Energy 72 (3): 217–234.
  • Tyagi, H., P. Phelan, and R. Prasher. 2009. “Predicted Efficiency of a Low-Temperature Nanofluid-Based Direct Absorption Solar Collector.” Journal of Solar Energy Engineering 131 (4): 041004.
  • Wang, J., Y. Dai, L. Gao, and S. Ma. 2009. “A New Combined Cooling, Heating and Power System Driven by Solar Energy.” Renewable Energy 34 (12): 2780–2788.
  • Wang, J.-J., Y.-Y. Jing, and C.-F. Zhang. 2010. “Optimization of Capacity and Operation for CCHP System by Genetic Algorithm.” Applied Energy 87 (4): 1325–1335.
  • Wang, S., and Z. Ma. 2008. “Supervisory and Optimal Control of Building HVAC Systems: A Review.” HVAC&R Research 14 (1): 3–32.
  • Wang, L., and C. Singh. 2008. “Stochastic Combined Heat and Power Dispatch Based on Multi-Objective Particle Swarm Optimization.” International Journal of Electrical Power & Energy Systems 30 (3): 226–234.
  • Wang, M., J. Wang, P. Zhao, and Y. Dai. 2015. “Multi-Objective Optimization of a Combined Cooling, Heating and Power System Driven by Solar Energy.” Energy Conversion and Management 89: 289–297.
  • Wang, J. L., J. Y. Wu, and C. Y. Zheng. 2013. “Design and Operation of a Hybrid CCHP System Including PV-Wind Devices.” ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, California, USA.
  • Wang, J., K. Yang, X. Zhang, G. Shi, and C. Fu. 2014. “An Illustration of the Optimization of Combined Cooling Heating and Power Systems Using Genetic Algorithm.” Building Services Engineering Research and Technology 35 (3): 296–320.
  • Wang, J., Z. (John) Zhai, Y. Jing, and C. Zhang. 2010. “Optimization Design of BCHP System to Maximize to Save Energy and Reduce Environmental Impact.” Energy 35 (8): 3388–3398.
  • Wu, D. W., and R. Z. Wang. 2006. “Combined Cooling, Heating and Power: A Review.” Progress in Energy and Combustion Science 32 (5–6): 459–495.
  • Yang, B., L. Chen, H. Feng, and Z. Ding. 2017. “Modelling, Analyses and Optimization for Exergy Performance of an Irreversible Intercooled Regenerated Brayton CHP Plant: Part 2 — Performance Optimization.” ASME International Mechanical Engineering Congress & Exposition (IMECE) Conference, Tampa, FL, November 3–9. Paper No. IMECE2017-70046.
  • Yang, B., L. G. Chen, Y. L. Ge, and F. R. Sun. 2014. “Exergy Analyses of an Endoreversible Closed Regenerative Brayton Cycle CCHP Plant.” International Journal of Energy, Environment and Economics 5 (6): 655–668.
  • Yari, M. 2010. “Exergetic Analysis of Various Types of Geothermal Power Plants.” Renewable Energy 35 (1): 112–121.
  • Yokoyama, R., K. Ito, and Y. Matsumoto. 1994. “Optimal Sizing of a Gas Turbine Cogeneration Plant in Consideration of Its Operational Strategy.” Journal of Engineering for Gas Turbines and Power 116 (1): 32.
  • Yousefi, T., F. Veysi, E. Shojaeizadeh, and S. Zinadini. 2012. “An Experimental Investigation on the Effect of Al2O3–H2O Nanofluid on the Efficiency of Flat-Plate Solar Collectors.” Renewable Energy 39 (1): 293–298.
  • Yuan, Z., and E. E. Michaelides. 1993. “Binary-Flashing Geothermal Power Plants.” Journal of Energy Resources Technology 115 (3): 232.
  • Yun, K., H. Cho, R. Luck, and P. J. Mago. 2011. “Real-Time Combined Heat and Power Operational Strategy Using a Hierarchical Optimization Algorithm.” Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 225 (4): 403–412.
  • Zhai, H., Y. J. Dai, J. Y. Wu, and R. Z. Wang. 2009. “Energy and Exergy Analyses on a Novel Hybrid Solar Heating, Cooling and Power Generation System for Remote Areas.” Applied Energy 86 (9): 1395–1404.
  • Zhai, X. Q., R. Z. Wang, Y. J. Dai, J. Y. Wu, Y. X. Xu, and Q. Ma. 2007. “Solar Integrated Energy System for a Green Building.” Energy and Buildings 39 (8): 985–993.
  • Zhai, X. Q., R. Z. Wang, J. Y. Wu, Y. J. Dai, and Q. Ma. 2008. “Design and Performance of a Solar-Powered Air-Conditioning System in a Green Building.” Applied Energy 85 (5): 297–311.
  • Zhang, T., and S. Mohamed. 2015. “Conceptual Design and Analysis of Hydrocarbon-Based Solar Thermal Power and Ejector Cooling Systems in Hot Climates.” Journal of Solar Energy Engineering 137 (2): 021001.
  • Zogg, R. A. 2004. “Cooling, Heating, and Power (CHP) for Commercial Buildings Benefits Analysis.” Cogeneration & Distributed Generation Journal 19 (4): 14–44.
  • Zogg, R., K. W. Roth, and J. Brodrick. 2005. “Using CHP Systems in Commercial Buildings.” ASHRAE Journal 47: 33–36.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.