References
- Alavi, F., and M. P. Jahan. 2017. “Optimization of Process Parameters in Micro-EDM of Ti-6Al-4 V Based on Full Factorial Design.” The International Journal of Advanced Manufacturing Technology 92 (1–4): 167–187. doi: https://doi.org/10.1007/s00170-017-0103-x
- Brazil, D., J. Manghan, D. KAspinwall, and E.-G. Ng. 1997. “Wear Characterization of Various Diamonds Tooling When Single Point Turning a Particle Reinforced Metal Matrix Composite.” Proceedings of the IMC-14, conference, Duplin Ireland, pp. 143–152.
- Durantea, S., G. Rutellib, and F. Rabezzana. 1997. “Aluminum-based MMC Machining with Diamond-Coated Cutting Tools.” Surface and Coatings Technology 94–95: 632–640. doi: https://doi.org/10.1016/S0257-8972(97)00521-5
- Feng, Yerui, Yongfeng Guo, Zebin Ling, and Xiaoyou Zhang. 2019. “Micro-holes EDM of Super Alloy Inconel 718 Based on a Magnetic Suspension Spindle System.” The International Journal of Advanced Manufacturing Technology 101: 2015–2026. doi: https://doi.org/10.1007/s00170-018-3075-6
- Jafferson, J. M., P. Hariharan, and J. Ram Kumar. 2014. “Effects of Ultrasonic Vibration and Magnetic Field in Micro-EDM Milling of Nonmagnetic Material.” Materials and Manufacturing Processes 29 (3): 357–363. doi: https://doi.org/10.1080/10426914.2013.872268
- Lin, Y. C., and H. S. Lee. 2008. “Machining Characteristics of Magnetic Force-Assisted EDM.” International Journal of Machines Tool and Manufacture 48: 1179–1186. doi: https://doi.org/10.1016/j.ijmachtools.2008.04.004
- Mohal, Sachin, and Harmesh Kumar. 2017. “Parametric Optimization of Multi Walled Carbon Nanotube-Assisted Electric Discharge Machining of Al-10%SiCp Metal Matrix Composite by Response Surface Methodology.” Materials and Manufacturing Processes 32 (3): 263–273. doi: https://doi.org/10.1080/10426914.2016.1140196
- Naidu Vignesh, S., K. Vipindas, R. Manu, and Mathew Jose. 2014. ‘Experimental Study on Varying Electromagnetic Field Assisted Die Sinking EDM’, 26th AIMTDR, p. 339 (1–6).
- Rattan, Nav, and Rahul S. Mulik. 2017. “Improvement in Material Removal Rate (MRR) Using Magnetic Field in TW-ECSM Process.” Materials and Manufacturing Processes 32 (1): 101–107. doi: https://doi.org/10.1080/10426914.2016.1176197
- Singh, B. Preetkanwal, S. Singh Sidhu, and H. S. Payal. 2018. “Investigation of Magnetic Field-Assisted EDM of Composites.” Materials and Manufacturing Processes 33 (6): 670–675. doi: https://doi.org/10.1080/10426914.2017.1364857
- Singh, P., V. Yadava, and A. Narayan. 2018. “Machining Performance Characteristics of Inconel 718 Super Alloy due to Hole-Sinking Ultrasonic Assisted Micro-EDM.” Journal of Advanced Manufacturing Systems 17 (1): 89–105. doi: https://doi.org/10.1142/S0219686718500063
- Sivaprakasam, P., and P. Hariharan. 2013. “Modeling the Machining Parameters of Micro Wire Electrical Discharge Machining of AL 2024T3 51.” Applied Mechanics and Materials 367: 466–470. doi: https://doi.org/10.4028/www.scientific.net/AMM.367.466
- Sivaprakasam, P., and P. Hariharan. 2018. “Optimization of Process Parameters of Micro-WEDM Process on Inconel Super Alloy Through Response Surface Methodology.” Journal of Mechanical and Production Engineering Research and Development 8 (6): 1001–1011.
- Tripathy, S., and D. K. Tripathy. 2017. “Multi-response Optimization of Machining Process Parameters for Powder Mixed Electro-Discharge Machining of H-11 die Steel Using Grey Relational Analysis and Topsis.” Machining Science and Technology 21 (3): 362–384. doi: https://doi.org/10.1080/10910344.2017.1283957
- Udaya Prakash, J., S. Ananth, G. Sivakumar, and T. V. Moorthy. 2018. “Multi-Objective Optimization of Wear Parameters for Aluminium Matrix Composites (413/B4C) Using Grey Relational Analysis.” Materials Today: Proceedings 5 (2): 7207–7216.
- Udaya Prakash, J., T. V. Moorthy, and S. Ananth. 2014. “Fabrication and Sliding Wear Behaviour of Metal Matrix Composites.” Applied Mechanics and Materials 612: 157–162. doi: https://doi.org/10.4028/www.scientific.net/AMM.612.157
- Wang, Y., and D. Hu. 2005. “Study on the Inner Surface Finishing of Tubing by Magnetic Abrasive Finishing.” International Journal of Machine Tools and Manufacture 45: 43–49. doi: https://doi.org/10.1016/j.ijmachtools.2004.06.014
- Yadav, Pawan Kumar, Pravendra Kumar, and S. K. S. Yadav. 2017. ‘Experimental Study of EDM and Electromagnetic Field Assisted EDM for Ni Alloy: A Comparative Study’ Proceeding of 10th international conference on precision, meso, micro and nano engineering (COPEN 10), 391–395.