References
- Ahlborn, B. K., and J. M. Gordon. 2000. “The Vortex Tube as a Classic Thermodynamic Refrigeration Cycle.” Journal of Applied Physics 88 (6): 3645–3653. doi: https://doi.org/10.1063/1.1289524
- Aljuwayhel, N. F., G. F. Nellis, and S. A. Klein. 2005. “Parametric and Internal Study of Vortex Tube Using a CFD Model.” International Journal of Refrigeration 28: 442–450. doi: https://doi.org/10.1016/j.ijrefrig.2004.04.004
- Behera, U., P. J. Paul, S. Kasthurirengan, R. Karunanithi, S. N. Ram, K. Dinesh, and S. Jacob. 2005. “CFD Analysis and Experimental Investigations Towards Optimizing the Parameters of Ranque-Hilsch Vortex Tube.” International Journal of Heat and Mass Transfer 48: 1961–1973. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.046
- Casasa, Y., L. E. Arteaga, M. Morales, E. Rosa, L. M. Peralta, and J. Dewulf. 2010. “Energy and Exergy Analysis of an Ethanol Fueled Solid Oxide Fuel Cell Power Plant.” Chemical Engineering Journal 162: 1057–1066. doi: https://doi.org/10.1016/j.cej.2010.06.021
- Dincer, K., A. Avci, S. Baskaya, and A. Berber. 2010. “Experimental Investigation and Exergy Analysis of the Performance of a Counter Flow Ranque-Hilsch Vortex Tube with Regard to Nozzle Cross-section Areas.” International Journal of Refrigeration 33 (5): 954–962. doi: https://doi.org/10.1016/j.ijrefrig.2010.03.009
- Dincer, K., and S. Baskaya. 2009. “Assessment of Plug Angle Effect on Exergy Effıciency of Counter-flow Ranque-Hilsch Vortex Tubes with the Exergy Analysis Method.” J. Faculty Eng. Architect. Gazi University 24 (3): 533–538.
- Dincer, K., S. Baskaya, B. Z. Uysal, and I. Ucgul. 2008a. “Experimental Investigation of the Performance of a Ranque-Hilsch Vortex Tube with Regard to a Plug Located at the Hot Outlet.” International Journal of Refrigeration 32: 87–94. doi: https://doi.org/10.1016/j.ijrefrig.2008.06.002
- Dincer, K., S. Tasdemir, S. Baskaya, I. Ucgul, and B. Z. Uysal. 2008b. “Fuzzy Modeling of Performance of Counterflow Ranque-Hilsch Vortex Tubes with Different Geometric Constructions.” Numerical Heat Transfer, Part B: Fundamentals 54 (6): 499–517. doi: https://doi.org/10.1080/10407790802483432
- Dincer, K., S. Tasdemir, S. Baskaya, and B. Z. Uysal. 2008c. “Modeling of the Effects of Length to Diameter Ratio and Nozzle Number on the Performance of Counterflow Ranque-Hilsch Vortex Tubes Using Artificial Neural Networks.” Applied Thermal Engineering 28: 2380–2390. doi: https://doi.org/10.1016/j.applthermaleng.2008.01.016
- Dincer, K., S. Tasdemir, S. Baskaya, and B. Z. Uysal. 2008d. “Modeling of the Effects of Plug tip Angle on the Performance of Counterflow Ranque-Hilsch Vortex Tubes Using Artificial Neural Networks.” Journal of Thermal Science and Technology 28: 1–7.
- Dincer, K., Y. Yilmaz, A. Berber, and S. Baskaya. 2011. “Experimental Investigation of Performance of Hot Cascade Type Ranque-Hilsch Vortex Tube and Exergy Analysis.” International Journal of Refrigeration 34 (4): 1117–1124. doi: https://doi.org/10.1016/j.ijrefrig.2011.01.017
- Dutta, T., K. P. Sinhamahapatra, and S. S. Bandyopdhyay. 2010. “Comparison of Different Turbulence Models in Predicting the Temperature Separation in a Ranque-Hilsch Vortex Tube.” International Journal of Refrigeration 33 (4): 783–792. doi: https://doi.org/10.1016/j.ijrefrig.2009.12.014
- Eiamsa-ard, S., and P. Promvonge. 2007. “Review of Ranque-Hilsch Effects in Vortex Tubes.” Renewable and Sustainable Energy Reviews 12: 1822–1842. doi: https://doi.org/10.1016/j.rser.2007.03.006
- Eiamsa-ard, S., K. Wongcharee, and P. Promvonge. 2010. “Experimental Investigation on Energy Separation in a Counter Flow Ranque-Hilsch Vortex Tube: Effect of Cooling a hot Tube.” International Communications in Heat and Mass Transfer 37: 156–162. doi: https://doi.org/10.1016/j.icheatmasstransfer.2009.09.013
- Farouk, T., B. Farouk, and A. Gutsol. 2009. “Simulation of Gas Species and Temperature Separation in the Counter-flow Ranque-Hilsch Vortex Tube Using the Large Eddy Simulation Technique.” International Journal of Heat and Mass Transfer 52 (13–14): 3320–3333. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2009.01.016
- Frohlingsdorf, W., and H. Unger. 1999. “Numerical Investigations of the Compressible Flow and the Energy Separation in the Ranque-Hilsch Vortex Tube.” International Journal of Heat and Mass Transfer 42: 415–422. doi: https://doi.org/10.1016/S0017-9310(98)00191-4
- Gao, C. M., K. J. Bosschaart, J. C. H. Zeegers, and A. T. A. M. de Waele. 2005. “Experimental Study on a Simple Ranque-Hilsch Vortex Tube.” Cryogenics 45: 173–183. doi: https://doi.org/10.1016/j.cryogenics.2004.09.004
- Kirmaci, V. 2009. “Energy Analysis and Performance of a Counter Flow Ranque-Hilsch Vortex Tube Having Various Nozzle Numbers at Different Inlet Pressures of Oxygen and air.” International Journal of Refrigeration 32: 1626–1633. doi: https://doi.org/10.1016/j.ijrefrig.2009.04.007
- Kirmaci, V., O. Uluer, and K. Dincer. 2010. “An Experimental Investigation of Performance and Exergy Analysis of a Counter Flow Vortex Tube Having Various Nozzle Numbers at Different Inlet Pressures of Air, Oxygen, Nitrogen, and Argon.” Journal of Heat Transfer 132: 121701–121707. doi: https://doi.org/10.1115/1.4002284
- Krasae-in, S., H. Stang, and P. Neksa. 2010. “Exergy Analysis on the Simulation of a Small-Scale Hydrogen Liquefaction Test Rig with a Multi-component Refrigerant Refrigeration System.” International Journal of Hydrogen Energy 35: 8030–8042. doi: https://doi.org/10.1016/j.ijhydene.2010.05.049
- Lewins, J., and A. Bejan. 1999. “Vortex Tube Optimization Theory.” Energy 24: 931–943. doi: https://doi.org/10.1016/S0360-5442(99)00039-0
- Markal, B., O. Aydın, and M. Avci. 2010. “An Experimental Study on the Effect of the Valve Angle of Counter-flow Ranque-Hilsch Vortex Tubes on Thermal Energy Separation.” Experimental Thermal and Fluid Science 34: 966–971. doi: https://doi.org/10.1016/j.expthermflusci.2010.02.013
- Pinar, A. M., O. Uluer, and V. Kirmaci. 2009. “Optimization of Counter Flow Ranque-Hilsch Vortex Tube Performance Using Taguchi Method.” International Journal of Refrigeration 32: 1487–1494. doi: https://doi.org/10.1016/j.ijrefrig.2009.02.018
- Prommas, R., P. Keangin, and P. Rattanadecho. 2010. “Energy and Exergy Analyses in Convective Drying Process of Multi-layered Porous Packed bed.” International Communications in Heat and Mass Transfer 37: 1106–1114. doi: https://doi.org/10.1016/j.icheatmasstransfer.2010.06.013
- Rakopoulos, C. D., and E. G. Giakoumis. 1997. “Simulation and Exergy Analysis of Transient Diesel-engine Operation.” Energy 22: 875–885. doi: https://doi.org/10.1016/S0360-5442(97)00017-0
- Saidi, M. H., and M. R. Allaf Yazdi. 1999. “Exergy Model of a Vortex Tube System with Experimental Results.” Energy 24: 625–632. doi: https://doi.org/10.1016/S0360-5442(98)00076-0
- Saidi, M. H., and M. S. Valipour. 2003. “Experimental Modeling of Vortex Tube Refrigerator.” Applied Thermal Engineering 23: 1971–1980. doi: https://doi.org/10.1016/S1359-4311(03)00146-7
- Sarhaddi, F., S. Farahat, H. Ajam, and A. Behzadmehr. 2010. “Exergetic Performance Assessment of a Solar Photovoltaic Thermal (PV/T) air Collector.” Energy and Buildings 42: 2184–2199. doi: https://doi.org/10.1016/j.enbuild.2010.07.011
- Secchiaroli, A., R. Ricci, S. Montelpare, and V. D’Alessandro. 2009. “Numerical Simulation of Turbulent Flow in a Ranque-Hilsch Vortex Tube.” International Journal of Heat and Mass Transfer 52: 5496–5511. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2009.05.031
- Selek, M., S. Tasdemir, K. Dincer, and S. Baskaya. 2011. “Experimental Examination of the Cooling Performance of Ranque-Hilsch Vortex Tube on the Cutting Tool Nose Point of the Turret Lathe Through Infrared Thermography Method.” International Journal of Refrigeration 34 (3): 807–815. doi: https://doi.org/10.1016/j.ijrefrig.2010.11.008
- Uluer, O., V. Kırmaci, and S. Atas. 2009. “Using the Artificial Neural Network Model for Modeling the Performance of the Counter Flow Vortex Tube.” Expert Systems with Applications 36: 12256–12263. doi: https://doi.org/10.1016/j.eswa.2009.04.061
- Wang, L., N. Li, and B. Zhao. 2010. “Exergy Performance and Thermodynamic Properties of the Ideal Liquid Desiccant Dehumidification System.” Energy and Buildings 42: 2437–2444. doi: https://doi.org/10.1016/j.enbuild.2010.08.022
- Wu, Y. T., Y. Ding, Y. B. Ji, C. F. Ma, and M. C. Ge. 2007. “Modification and Experimental Research on Vortex Tube.” International Journal of Refrigeration 30: 1042–1049. doi: https://doi.org/10.1016/j.ijrefrig.2007.01.013
- Xue, Y., and M. Arjomandi. 2008. “The Effect of Vortex Angle on the Efficiency of the Ranque-Hilsch Vortex Tube.” Experimental Thermal and Fluid Science 33 (1): 54–57. doi: https://doi.org/10.1016/j.expthermflusci.2008.07.001