References
- Bastawissi, Hagar Alm El Din, Medhat Elkelawy, Hitesh Panchal, and Kishorkumar Sadasivuni. 2019. “Optimization of the Multi-Carburant Dose as an Energy Source for the Application of the HCCI Engine.” Fuel 253: 15–24. doi: https://doi.org/10.1016/j.fuel.2019.04.167
- El Shenawy, E. A., E. A. El Shenawy, Hager Alm-Eldin Bastawissi, Mahmoud M. Shams, Hitesh Panchal, Kishorkumar Sadasivuni, and Nishant Thakar. 2019. “Investigation and Performance Analysis of Water-Diesel Emulsion for Improvement of Performance and Emission Characteristics of Partially Premixed Charge Compression Ignition (PPCCI) Diesel Engines.” Sustainable Energy Technologies and Assessments 36: 100546.doi: https://doi.org/10.1016/j.fuel.2019.115791. doi: https://doi.org/10.1016/j.seta.2019.100546
- Elkelawy, Medhat, Hagar Alm-Eldin Bastawissi, Khaled Khodary Esmaeil, Ahmed Mohamed Radwan, Hitesh Panchal, Kishor Kumar Sadasivuni, Deepalekshmi Ponnamma, and Rashmi Walvekar. 2019. “Experimental Studies on the Biodiesel Production Parameters Optimization of Sunflower and Soybean oil Mixture and DI Engine Combustion, Performance, and Emission Analysis Fueled with Diesel/Biodiesel Blends.” Fuel 255: 115791. doi:https://doi.org/10.1016/j.apr.2019.09.021. doi: https://doi.org/10.1016/j.fuel.2019.115791
- Elkelawy, Medhat, Safaa El-din H Etaiw, Hagar Alm-Eldin Bastawissi, Hassan Marie, Ahmed Elbanna, Hitesh Panchal, Kishorkumar Sadasivuni, and Hitesh Bhargav. 2019. “Study of Diesel-Biodiesel Blends Combustion and Emission Characteristics in a CI Engine by Adding Nanoparticles of Mn (II) Supramolecular Complex.” Atmopheric Pollution Research. doi:https://doi.org/10.1016/j.apr.2019.09.021.
- Ezhilmaran, V., N. J. Vasa, and L. Vijayaraghavan. 2018. “Investigation on Generation of Laser Assisted Dimples on Piston Ring Surface and Influence of Dimple Parameters on Friction.” Surface & Coatings Technology 335: 314–326. doi: https://doi.org/10.1016/j.surfcoat.2017.12.052
- Johansson, Staffan, Per H. Nilsson, Robert Ohlsson, and Bengt-Göran Rosén. 2011. “Experimental Friction Evaluation of Cylinder Liner/Piston Ring Contact.” Wear 271: 625–633. doi: https://doi.org/10.1016/j.wear.2010.08.028
- Kligerman, Y., I. Etsion, and A. Shinkarenko. 2005. “Improving Tribological Performance of Piston Rings by Partial Surface Texturing.” Journal of Tribology 127: 632–638. doi: https://doi.org/10.1115/1.1866171
- Kovalhchenko, Andriy, Oyelayo Ajayi, Ali Erdemir, and George Fenske. 2011. “Friction and Wear Behaviour of Laser Textures Surface Under Lubricated Initial Point Contact.” Wear 271: 1719–1725. doi: https://doi.org/10.1016/j.wear.2010.12.049
- Profito, Francisco J., Sorin-Cristian Vlădescu, Tom Reddyhoff, and Daniele Dini. 2017. “Transient Experimental and Modelling Studies of Laser-Textured Microgrooved Surfaces with a Focus on Piston-Ring Cylinder Liner Contacts.” Tribology International 113: 125–136. doi: https://doi.org/10.1016/j.triboint.2016.12.003
- Ryk, G., and I. Etsion. 2006. “Testing Pistons Rings with Partial Laser Surface Texturing for Friction Reduction.” Wear 261: 792–796. doi: https://doi.org/10.1016/j.wear.2006.01.031
- Ryk, G., Y. Kligerman, and I. Etsion. 2002. “Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive Components.” Tribology Transactions 45: 444–449. doi: https://doi.org/10.1080/10402000208982572
- Shikarenko, A., et al. 2009. “The Effect of Surface Texturing in Soft Elastohydrodynamic Lubrication.” Tribology International 42: 284–292. doi: https://doi.org/10.1016/j.triboint.2008.06.008
- Tomanik, E., F. J. Profito, and D. C. Zachariadis. 2013. “Modelling the Hydrodynamic Support of Cylinder Bore and Piston Rings with Laser Textured Surfaces.” Tribology International 59: 90–96. doi: https://doi.org/10.1016/j.triboint.2012.01.016
- Usman, Ali, and Cheol Woo Park. 2017. “Numerical Investigation of Tribological Performance in Mixed Lubrication of Textured Piston Ring-Liner Conjunction with a Non-Circular Cylinder Bore.” Tribology International 105: 148–157. doi: https://doi.org/10.1016/j.triboint.2016.09.043
- Vladescu, Sorin-Cristian, Alessandra Ciniero, Khizer Tufail, Arup Gangopadhyay, and Tom Reddyhoff. 2017. “Looking Into a Laser Textured Piston Ring-Liner Contact.” Tribology International 115: 140–153. doi: https://doi.org/10.1016/j.triboint.2017.04.051
- Yi, Wan, and Xiong Dang-sheng. 2008. “The Effect of Laser Surface Texturing on the Frictional Performance of Face Seal.” Journal of Materials Processing Technology I 197: 96–100. doi: https://doi.org/10.1016/j.jmatprotec.2007.06.019
- Zhou, Yuankai, Hua Zhu, Wei Tang, Chenbo Ma, and Wenqian Zhang. 2012. Development of the Theoretical Model for the Optimal Design of Surface Texturing on the Cylinder Liner. Tribology International 52:1–6. doi: https://doi.org/10.1016/j.triboint.2011.12.017