References
- Alam, T., and M. H. Kim. 2017. “A Critical Review on Artificial Roughness Provided in Rectangular Solar Air Heater Duct.” Renewable and Sustainable Energy Reviews 69: 387–400. doi: https://doi.org/10.1016/j.rser.2016.11.192
- ASHRAE Standard 93-97. 1977. Methods of Testing to Determine the Thermal Performance of Solar Collectors. Atlanta Ga: American Society of Heating, Refrigerating and Air-conditioning Engineers Inc.
- Chang, S. W., T. M. Liou, K. F. Chiang, and G. F. Hong. 2008. “Heat Transfer and Pressure Drop in Rectangular Channel with Compound Roughness of V-Shaped Ribs and Deepened Scales.” International Journal of Heat Mass Transfer 51: 457–468. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2007.05.010
- Executive Summary Power Sector February. 2017. “Executive Summary Power Sector February 2017"(pdf). Report. Central Electricity Authority, Ministry of Power, Govt. of India. 28 February 2017. Accessed April 24, 2017.
- Global Trends in Sustainable Energy Investment. 2007. “Global Trends in Sustainable Energy Investment 2007: Analysis of Trends and Issues in the Financing of Renewable Energy and Energy Efficiency in OECD and Developing Countries” (PDF). Unep.org. United Nations Environment Programme. 2007. 3. Archived (PDF) from the original on 13 October 2014. Retrieved 13 October 2014.
- Gupta, A., V. Sriharsha, S. V. Prabhu, and R. P. Vedula. 2008. “Local Heat Transfer Distribution in a Square Channel with 90˚ Continuous, 90˚ Saw Tooth Profiled and 60˚ Broken Ribs.” Experimental Thermal and Fluid Science 32: 997–1010. doi: https://doi.org/10.1016/j.expthermflusci.2007.11.015
- Han, J. C., Y. M. Zhang, and C. P. Lee. 1991. “Augmented Heat Transfer in Square Channels with Parallel, Crossed, and V Shaped Angled Ribs.” Trans. ASME Journal of Heat Transfer 113: 590–596. doi: https://doi.org/10.1115/1.2910606
- Kline, S. J., and F. A. Mcclintock. 1953. “Describing Uncertainties in Single Sample Experiments.” Mechanical Engineering 75: 3–8.
- Kumar, V. 2019a. “Nusselt Number and Friction Factor Correlations of Three Sides Concave Dimple Roughened Solar air Heater.” Renewable Energy 135: 355–377. doi: https://doi.org/10.1016/j.renene.2018.12.002
- Kumar, V. 2019b. “Thermal and Thermohydraulic Performance Analysis of Three Sides Artificially Roughened Solar Collectors.” Solar Energy 190: 212–227. doi: https://doi.org/10.1016/j.solener.2019.08.018
- Kumar, A., R. Kumar, R. Maithani, R. Chauhan, M. Sethi, A. Kumari, S. Kumar, and S. Kumar. 2017. “Correlation Development for Nusselt Number and Friction Factor of a Multiple Type V-Pattern Dimpled Obstacles Solar Air Passage.” Renewable Energy 109: 461–479. doi: https://doi.org/10.1016/j.renene.2017.03.030
- Kumar, V., and L. Prasad. 2017a. “Experimental Investigation on Heat Transfer and Fluid Flow of Air Flowing Under Three Sides Concave Dimple Roughened Duct.” International Journal of Mechanical Engineering and Technology (IJMET) 8 (11): 1083–1094, November, Article ID: IJMET_08_11_110.
- Kumar, V., and L. Prasad. 2017b. “Thermal Performance Investigation of One and Three Sides Concave Dimple Roughened Solar Air Heaters.” International Journal of Mechanical Engineering and Technology (IJMET) 8 (12): 31–45, December, Article ID: IJMET_08_12_004.
- Kumar, V., and L. Prasad. 2017. “Experimental Analysis of Heat Transfer and Friction for Three Sides Roughened Solar Air Heater.” Annales de Chimie – Science des Matériaux, ACSM 41 (1–2): 75–107. doi: https://doi.org/10.3166/acsm.41.75-107
- Kumar, V., and L. Prasad. 2018a. “Augmentation in Thermal Efficiency of Three Sides Over One Side Concave Dimple Roughened Ducts.” Carbon – Science and Technology 10 (3): 8–16, ISSN 0974-0546.
- Kumar, V., and L. Prasad. 2018b. “Performance Analysis of Three Sides Concave Dimple Shape Roughened Solar Air Heater.” Journal of Sustainable Development of Energy, Water and Environment Systems 6 (4): 631–648. doi: https://doi.org/10.13044/j.sdewes.d6.0211
- Kumar, V., and L. Prasad. 2018c. “Performance Prediction of Three Sides Hemispherical Dimple Roughened Solar Duct.” Instrumentation, Mesure, Métrologie I2M 17 (2): 273–293.
- Kumar, V., and L. Prasad. 2019. “Thermal Performance Investigation of Three Sides Concave Dimple Roughened Solar Air Heaters.” Solar Energy 188: 361–379. doi: https://doi.org/10.1016/j.solener.2019.06.008
- Lau, S. C., R. D. McMillan, and J. C. Han. 1991. “Turbulent Heat Transfer and Friction in a Square Channel with Discrete Rib Tabulators.” Trans. ASME J. Heat Transfer 113: 360–366.
- Layek, A., J. S. Saini, and S. C. Solanki. 2007. “Heat Transfer Coefficient and Friction Characteristics of Rectangular Solar Air Heater Duct Using Rib-Grooved Artificial Roughness.” International Journal of Heat and Mass Transfer 50: 4845–4854. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2007.02.042
- Liou, T. M., and J. J. Hwang. 1993. “Turbulent Heat Transfer Augmentation and Friction in Periodic Fully Developed Channel Flows,” Trans. Journal of Heat Transfer 114: 56–64. doi: https://doi.org/10.1115/1.2911267
- Mathiesen, Brian Vad, Henrik Lund, David Connolly, Henrik Wenzel, Poul Alberg Østergaard, Bernd Möller, Steffen Nielsen, et al. 2015. “Smart Energy Systems for Coherent 100% Renewable Energy and Transport Solutions.” Applied Energy 145: 139–154. doi: https://doi.org/10.1016/j.apenergy.2015.01.075
- Momin, A. M. E., J. S. Saini, and S. C. Solanki. 2002. “Heat Transfer and Friction in Solar Air Heater Duct with V-Shaped Rib Roughness on Absorber Plate.” International Journal of Heat and Mass Transfer 45: 3383–3396. doi: https://doi.org/10.1016/S0017-9310(02)00046-7
- Pandey, N. K., V. K. Bajpai, and G. Varun. 2016. “Experimental Investigation of Heat Transfer Augmentation Using Multiple Arcs with Gap on Absorber Plate of Solar Air Heater.” Solar Energy 134: 314–326. doi: https://doi.org/10.1016/j.solener.2016.05.007
- Ravigururajan, T. S., and A. E. Bergles. 1985. “General Correlations for Pressure Drop and Heat Transfer for Single-Phase Turbulent Flow in Internally Ribbed Tubes.” Transactions of ASME HTD 52: 9–20.
- Renewable Energy in India-An Overview. 2007. “ Renewable Energy in India-An Overview”, India Energy Book, World Energy Council Indian Member Committee, Vol. II, 25-27.
- Ridouane, E. I. H., and A. Campo. 2007. “Heat Transfer and Pressure Drop Characteristics of Laminar air Flows Moving in a Parallel-Plate Channel with Transverse Hemi-Cylindrical Cavities.” International Journal of Heat and Mass Transfer 50: 3913–3924. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2007.02.004
- Saini, R. P., and J. S. Saini. 1997. “Heat Transfer and Friction Factor Correlations for Artificially Roughened Ducts with Expanded Metal Mesh as Roughness Element.” Int. Journal of Heat and Mass Transfer 40 (4): 973–986. doi: https://doi.org/10.1016/0017-9310(96)00019-1
- Saini, S. K., and R. P. Saini. 2008. “Development of Correlations for Nusselts Number and Friction Factor for Solar Air Heater with Roughened Duct Having arc-Shaped Wire as Artificial Roughness.” Solar Energy 82: 1118–1130. doi: https://doi.org/10.1016/j.solener.2008.05.010
- Sethi, M., G. Varun, and N. S. Thakur. 2012. “Correlations for Solar air Heater Duct with Dimpled Shape Roughness Elements on Absorber Plate.” Solar Energy 86: 2852–2861. doi: https://doi.org/10.1016/j.solener.2012.06.024
- Singh, S., S. Chander, and J. S. Saini. 2011. “Heat Transfer and Friction Factor Correlations of Solar Air Heater Ducts Artificially Roughened with Discrete V-Down Ribs.” Energy 36: 5053–5064. doi: https://doi.org/10.1016/j.energy.2011.05.052
- Skullong, S., and P. Promvonge. 2014. “Experimental Investigation on Turbulent Convection in Solar Air Heater Channel Fitted with Delta Winglet Vortex Generator. Fluid Dynamics and Transport Phenomena.” Chinese Journal of Chemical Engineering 22 (1): 1–10. doi: https://doi.org/10.1016/S1004-9541(14)60030-6
- Taslim, M. E., T. Li, and D. M. Krecher. 1996. “Experimental Heat Transfer and Friction in Channels Roughened with Angled, V-Shaped and Discrete Ribs on Two Opposite Walls.” Transactions of ASME Journal of Turbo-Machinery 118: 20–28. doi: https://doi.org/10.1115/1.2836602
- Wongcharee, K., W. Changcharoen, and S. Eiamsa-ard. 2011. “Numerical Investigation of Flow Friction and Heat Transfer in a Channel with Various Shaped Ribs Mounted on Two Opposite Ribbed Walls.” International Journal of Chemical Reactor Engineering 9: 1–21. doi: https://doi.org/10.1515/1542-6580.2560