Numerical study of heat transfer enhancement in twisted clockwise-counterclockwise square ducts

References

• Adibi, O., S. Rashidi, and J. A. Esfahani. 2020. “Effects of Perforated Anchors on Heat Transfer Intensification of Turbulence Nanofluid Flow in a Pipe.” Journal of Thermal Analysis and Calorimetry 141 (5): 2047–2059. doi:10.1007/s10973-020-09705-9.
   Web of Science ®Google Scholar
• Akbarzadeh, M., S. Rashidi, R. Masoodi, and O. S. Abianeh. 2019. “Effect of Transverse Twisted Baffles on Performance and Irreversibilities in a Duct.” Journal of Thermophysics and Heat Transfer 33 (1): 49–62. doi:10.2514/1.T5373.
   Web of Science ®Google Scholar
• Arulprakasajothi, M., U. Chandrasekhar, K. Elangovan, and D. Yuvarajan. 2020. “Influence of Conical Strip Inserts in Heat Transfer Enhancement Under Transition Flow.” International Journal of Ambient Energy 41 (5): 511–516. Doi: 10.1080/01430750.2018.1472651.
   Web of Science ®Google Scholar
• Bhadouriya, R., A. Agrawal, and S. V. Prabhu. 2015a. “Experimental and Numerical Study of Fluid Flow and Heat Transfer in a Twisted Square Duct.” International Journal of Heat and Mass Transfer 82: 143–158. doi:10.1016/j.ijheatmasstransfer.2014.11.054.
   Web of Science ®Google Scholar
• Bhadouriya, R., A. Agrawal, and S. V. Prabhu. 2015b. “Experimental and Numerical Study of Fluid Flow and Heat Transfer in an Annulus of Inner Twisted Square Duct and Outer Circular Pipe.” International Journal of Thermal Sciences 94: 96–109. doi:10.1016/j.ijthermalsci.2015.02.019.
   Web of Science ®Google Scholar
• Bishara, F. 2010. “Numerical Simulation of Fully Developed Laminar Flow and Heat Transfer in Isothermal Helically Twisted Tubes with Elliptical Cross-Sections.” PhD diss., University of Cincinnati.
   Google Scholar
• Chang, K. S., J. S. Choi, and Jae-S. Kim. 1988. “Laminar Fluid Flow in a Twisted Elliptic Tube.” Ksme Journal 1: 44–51. doi:10.1007/BF02944075.
   Google Scholar
• Chang, S. W., T. L. Yang, and J. S. Liou. 2007. “Heat Transfer and Pressure Drop in Tube with Broken Twisted Tape Insert.” Experimental Thermal and Fluid Science 32 (2): 489–501. doi:10.1016/j.expthermflusci.2007.06.002.
   Web of Science ®Google Scholar
• Dewan, A., P. Mahanta, K. S. Raju, and P. S. Kumar. 2004. “Review of Passive Heat Transfer Augmentation Techniques.” Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 218: 509–527. doi:10.1243/0957650042456953.
   Web of Science ®Google Scholar
• Hasan, M. A., and K. Sumathy. 2009. “Study on the Potential use of Helical Swirl Generators in Enhancing the Thermal Performance of Solar air Heaters.” International Journal of Ambient Energy 30 (4): 207–216. doi:10.1080/01430750.2009.9675098.
   Google Scholar
• Khoshvaght, A. M., and Z. A. Lahtari. 2016. “Forced Convection in Twisted Minichannel (TMC) with Different Cross Section Shapes: A Numerical Study.” Applied Thermal Engineering 93: 101–112. doi:10.1016/j.applther-maleng.2015.09.010.
   Web of Science ®Google Scholar
• Mahato, S. K., S. C. Rana, and R. N. Barman. 2019. “Numerical Analysis of Heat Transfer and Fluid Flow Through the Twisted Square Duct (TSD): Nanofluid as Working Fluid.” Journal of Mechanical Science and Technology 33 (11): 5507–5514. doi:10.1007/s12206-019-1043-1.
   Web of Science ®Google Scholar
• Mahato, S. K., S. C. Rana, and R. N. Barman. 2021a. “Effect of Al2O3/Water and cuo/Water Nanofluids on Heat Transfer Enhancement Flows Through Twisted Clockwise–Counter-Clockwise Square Duct.” Arabian Journal for Science and Engineering, 1–19. doi:10.1007/s13369-021-06118-0.
   Web of Science ®Google Scholar
• Mahato, S. K., S. C. Rana, and R. N. Barman. 2021b. “Heat Transfer and Fluid Flow Characteristics Within non-Circular Duct.” In IOP Conference Series: Materials Science and Engineering 1146 (1): 012013.
   Google Scholar
• Mahato, S. K., S. C. Rana, and R. N. Barman. 2021c. “Study of Heat Transfer Enhancement Through the non-Circular Ducts Using Three Dimensional Numerical Investigations and Their Comparisons.” IOP Conference Series: Materials Science and Engineering 1128 (1): 012037.
   Google Scholar
• Mahato, S. K., S. C. Rana, R. N. Barman, and S. Goswami. 2018. “Numerical Analysis of Heat Transfer and Fluid Flow Through Twisted Hexagonal and Square Duct and Their Comparisons.” Chemical Engineering 71: 1351–1356. doi:10.3303/CET1871226.
   Google Scholar
• Manglik, R. M., and A. E. Bergles. 1993a. “Heat Transfer and Pressure Drop Correlations for Twisted-Tape Inserts in Isothermal Tubes: Part II—Transition and Turbulent Flows.” Journal of Heat Transfer 115 (4): 890–896. doi:10.1115/1.2911384.
   Web of Science ®Google Scholar
• Manglik, R. M., and A. E. Bergles. 1993b. “Heat Transfer and Pressure Drop Correlations for Twisted-Tape Inserts in Isothermal Tubes: Part I—Laminar Flows.” Journal of Heat Transfer 115 (4): 881–889. doi:10.1115/1.2911383.
   Web of Science ®Google Scholar
• Muthusamy, C., and P. Gopi. 2021. “Energy-efficient Heat Exchanger Equipped with Multiple Short-Length Taper Twisted Tapes.” International Journal of Ambient Energy, 1–13. doi:10.1080/01430750.2021.1999322.
   Web of Science ®Google Scholar
• Rashidi, S., M. Akbarzadeh, N. Karimi, and R. Masoodi. 2018. “Combined Effects of Nanofluid and Transverse Twisted-Baffles on the Flow Structures, Heat Transfer and Irreversibilities Inside a Square Duct–a Numerical Study.” Applied Thermal Engineering 130: 135–148. doi:10.1016/j.applthermaleng.2017.11.048.
   Web of Science ®Google Scholar
• Singh, Y., A. Kumar, R. Maithani, and N. Verma. 2021. “Tio2/H2O Nanofluid Flow and Heat Transfer Analysis in V-Pattern with Combined Protrusion Obstacle Square Channel: Experimental Analysis and CFD Validation.” International Journal of Ambient Energy 42 (6): 652–671. doi:10.1080/01430750.2018.1563807.
   Web of Science ®Google Scholar
• Sivashanmugam, P., and S. Suresh. 2007. “Experimental Studies on Heat Transfer and Friction Factor Characteristics of Turbulent Flow Through a Circular Tube Fitted with Regularly Spaced Helical Screw-Tape Inserts.” Applied Thermal Engineering 27: 1311–1319. doi:10.1016/j.applthermal-eng.2006.10.035.
   Web of Science ®Google Scholar
• Suri, A. R. S., A. Kumar, and R. Maithani. 2017. “Heat Transfer Enhancement of Heat Exchanger Tube with Multiple Square Perforated Twisted Tape Inserts: Experimental Investigation and Correlation Development.” Chemical Engineering and Processing: Process Intensification 116: 76–96. doi:10.1016/j.cep.2017.02.014.
   Web of Science ®Google Scholar
• Wang, L. B., W. Q. Tao, Q. W. Wang, and Y. L. He. 2001. “Experimental and Numerical Study of Turbulent Heat Transfer in Twisted Square Ducts.” Journal of Heat Transfer 123 (5): 868–877. doi:10.1115/1.1389464.
   Web of Science ®Google Scholar
• Yadav, R. J., S. Kore, V. N. Raibhole, and P. S. Joshi. 2015. “Development of Correlations for Friction Factor and Heat Transfer Coefficient for Square and hex Duct with Twisted Tape Insert in Laminar Flow.” Procedia Engineering 127: 250–257. doi:10.1016/j.proeng.2015.11.337.
   Google Scholar
• Yang, S., L. Zhang, and H. Xu. 2011. “Experimental Study on Convective Heat Transfer and Flow Resistance Characteristics of Water Flow in Twisted Elliptical Tubes.” Applied Thermal Engineering 31: 2981–2991. doi:10.1016/j.applthermaleng.2011.05.030.
   Web of Science ®Google Scholar