Transient vortex shedding behaviour of non-reacting flow over V-gutter bluff bodies with a central slit

References

• Ai, Yanhui, Dakui Feng, Hengkui Ye, and Lin Li. 2013. “Unsteady Numerical Simulation of Flow Around 2-D Circular Cylinder for High Reynolds Numbers.” Journal of Marine Science and Application 12 (2): 180–184. doi:10.1007/S11804-013-1183-0.
   Google Scholar
• Apacoglu, Buryan, Akin Paksoy, and Selin Aradag. 2014. “CFD Analysis and Reduced Order Modeling of Uncontrolled and Controlled Laminar Flow Over a Circular Cylinder.” Engineering Applications of Computational Fluid Mechanics 5 (1): 67–82. doi:10.1080/19942060.2011.11015353.
   Google Scholar
• Blanchard, Ryan, Wing Ng, Todd K. Lowe, and Uri Vandsburger. 2014. “Simulating Bluff-Body Flameholders: On the Use of Proper Orthogonal Decomposition for Wake Dynamics Validation.” Journal of Engineering for Gas Turbines and Power 136 (12), doi:10.1115/1.4027556.
   Web of Science ®Google Scholar
• Bobba, Mohan K. 2007. “Flame Stabilization and Mixing Characteristics in a Stagnation Point Reverse Flow Combustor.” Dissertation Presented to The Academic Faculty, Georgia Institute of Technology.
   Google Scholar
• Bruno, Luca, Davide Fransos, Nicolas Coste, and Arianna Bosco. 2010. “3D Flow Around a Rectangular Cylinder: A Computational Study.” Journal of Wind Engineering and Industrial Aerodynamics 98 (6–7): 263–276. doi:10.1016/J.JWEIA.2009.10.005.
   Web of Science ®Google Scholar
• Cai, Jinsheng, Loon Tat Chng, and Her Mann Tsai. 2008. “On Vortical Flows Shedding from a Bluff Body with a Wavy Trailing Edge.” Physics of Fluids 20 (6): 064102. doi:10.1063/1.2931682.
   Web of Science ®Google Scholar
• Durbin, M. D., M. D. Vangsness, D. R. Ballal, and V. R. Katta. 1996. “Study of Flame Stability in a Step Swirl Combustor.” Journal of Engineering for Gas Turbines and Power 118 (2): 308–315. doi:10.1115/1.2816592.
   Web of Science ®Google Scholar
• El-feky, S. S. M., and A. Penninger. 1994. “A Study of Flammability Lean Limit for a Bluff Body Stabilized Flame.” Periodica Polytechnica Mechanical Engineering 38 (1): 33–45.
   Google Scholar
• Fan, Aiwu, Jianlong Wan, Yi Liu, Boming Pi, Hong Yao, and Wei Liu. 2014. “Effect of Bluff Body Shape on the Blow-off Limit of Hydrogen/Air Flame in a Planar Micro-Combustor.” Applied Thermal Engineering 62 (1): 13–19. doi:10.1016/J.APPLTHERMALENG.2013.09.010.
   Web of Science ®Google Scholar
• George, Luckachan K., Sekar K. Raja, A. R. Srikrishnan, and R. Kannan. 2021. “The Influence of the Geometry of V-Gutter Bluff Body on Transient Vortex Shedding.” International Journal of Turbo and Jet Engines. doi:10.1515/TJENG-2021-0030/MACHINEREADABLECITATION/RIS.
   Web of Science ®Google Scholar
• Gillies, E. A. 1998. “Low-Dimensional Control of the Circular Cylinder Wake.” Journal of Fluid Mechanics 371 (September): 157–178. doi:10.1017/S0022112098002122.
   Google Scholar
• Harish Subramanian, G., Ch V.S. Nagarjun, K. v. Satish Kumar, B. Ashish Kumar, Vishal Srikanth, and A. R. Srikrishnan. 2018. “Mixing Enhancement Using Chevron Nozzle: Studies on Free Jets and Confined Jets.” Sādhanā 43 (7): 1–14. doi:10.1007/S12046-018-0898-7.
   Web of Science ®Google Scholar
• Homescu, C., I. M. Navon, and Z. Li. 2002. “Suppression of Vortex Shedding for Row Around a Circular Cylinder Using Optimal Control.” International Journal for Numerical Methods in Fluids 38: 43–69. doi:10.1002//d.203.
   Web of Science ®Google Scholar
• Husain, Sajjad A., Ganesh Nair, Santosh Shanbhogue, and Tim C. Lieuwen. 2008. “Review and Analysis of Bluff Body Flame Stabilization Data.” http://www.asme.org/about-asme/terms-of-use.
   Google Scholar
• Karthikeyan, S., and S. Senthilkumar. 2017. “Control of Vortex Shedding Behind a Circular Cylinder Using a Combination of Slot and Control Plates.” Lecture Notes in Mechanical Engineering, 313–321. doi:10.1007/978-81-322-2743-4_30.
   Google Scholar
• Karthikeyan, S., S. Senthilkumar, B. T. Kannan, and U. Chandrasekhar. 2018. “Numerical Analysis on Effect of Jet Injection on Vortex Shedding for Flow Over a Circular Cylinder.” Arabian Journal for Science and Engineering 44 (2): 1475–1488. doi:10.1007/S13369-018-3588-1.
   Web of Science ®Google Scholar
• Kratzsch, Christoph, Klaus Timmel, Sven Eckert, and Rüdiger Schwarze. 2015. “URANS Simulation of Continuous Casting Mold Flow: Assessment of Revised Turbulence Models.” Steel Research International 86 (4): 400–410. doi:10.1002/srin.201400097.
   Web of Science ®Google Scholar
• Kumar, R. Ajith, Josy Joykutty, Rahul Korah Shaji, and A. R. Srikrishnan. 2016. “Vortex Suppression Through Drain Port Sizing.” Journal of Aerospace Engineering 29 (4): 06016002. doi:10.1061/(ASCE)AS.1943-5525.0000609.
   Web of Science ®Google Scholar
• Kumar, R. Ajith, Ragesh R. Nair, Mahadev Prabhu, and A. R. Srikrishnan. 2017. “Vortex Formation During Draining from Cylindrical Tanks: Effect of Drain Port Eccentricity.” Journal of Aerospace Engineering 30 (5): 06017001. doi:10.1061/(ASCE)AS.1943-5525.0000731.
   Web of Science ®Google Scholar
• Langtry, Robin B., and Florian R. Menter. 2012. “Correlation-Based Transition Modeling for Unstructured Parallelized Computational Fluid Dynamics Codes.” AIAA Journal 47 (12): 2894–2906. doi:10.2514/1.42362.
   Google Scholar
• Lemaire, A., T. R. Meyer, K. Zahringer, J. R. Gord, and J. C. Rolon. 2002. “PIV/PLIF Investigation of Two-Phase Vortex-Flame Interactions.” 11th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, July.
   Google Scholar
• Li, Hua Guang, Prashant Khare, Hong Gye Sung, and Vigor Yang. 2016. “A Large-Eddy-Simulation Study of Combustion Dynamics of Bluff-Body Stabilized Flames.” Combustion Science and Technology 188 (6): 924–952. doi:10.1080/00102202.2015.1136296.
   Web of Science ®Google Scholar
• Lienhard, John. 1966. Synopsis of Lift, Drag, and Vortex Frequency Data for Rigid Circular Cylinders. Pullman Wash.: Technical Extension Service Washington State University.
   Google Scholar
• Menter, F. R. 1994. “Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications.” AIAA Journal 32 (8): 1598–1605. doi:10.2514/3.12149.
   Web of Science ®Google Scholar
• Mishra, D. P., and R. Kannan. 2003. “An Experimental Study of Lean Premixed Combustor.” International Journal of Turbo and Jet Engines 20: 245–254.
   Web of Science ®Google Scholar
• Mishra, D. P., and R. Kannan. 2004. “Experimental Investigation of Lean Premixed Swirl Burner.” International Journal of Turbo and Jet Engines 21 (2): 103–113. doi:10.1515/TJJ.2004.21.2.103/MACHINEREADABLECITATION/RIS.
   Web of Science ®Google Scholar
• Parammasivam, K. M., G. Suganya, N. Abdul Basidh, and D. Devanathan. 2016. “Experimentation of Flame Stabilization Using Flat Plate Gutter Made of Porous Material for Afterburner Applications.” Journal of Aerospace Engineering and Technology 6 (2): 71–76.
   Google Scholar
• Potter, Andrew E., and Edgar L. Wong. 1958. “Effect of Pressure and Duct Geometry on Bluff-Body Flame Stabilization.” NACA Technical Note 4381.
   Google Scholar
• Prabhu, Mahadev, K. Sreenath, R. Ajith Kumar, J. S. Jayakumar, and P. J. Joshy. 2021. “Rankine Vortex Suppression in Tanks with Conical Base: A Numerical Investigation.” Journal of Spacecraft and Rockets 58 (2): 326–333. doi:10.2514/1.A34794.
   Web of Science ®Google Scholar
• Renard, P.-H., D. Thévenin, J. C. Rolon, and S. Candel. 2000. “Dynamics of Flame/Vortex Interactions.” www.elsevier.com/locate/pecs.
   Google Scholar
• Roshko, Anatol. 1955. “On the Wake and Drag of Bluff Bodies.” Journal of the Aeronautical Sciences 22 (2): 124–132. doi:10.2514/8.3286.
   Google Scholar
• Sharma, Pramod Kumar, Vilas Warudkar, and Siraj Ahmed. 2018. “Numerical and Experimental Analysis of the Flow Over Sinusoidal Hills.” International Journal of Ambient Energy 42 (3): 244–250. doi:10.1080/01430750.2018.1542622.
   Google Scholar
• Tanaka, Shinji, Katsuyoshi Takahashi, Jun Hosoi, and Masahiro Uchida. 2013. “Bluff Body Flame Holder with Flow Entrainment Using Perforated Plate.” 49th AIAA/ASME/SAE/ASEE joint propulsion conference 1 PartF. American Institute of Aeronautics and Astronautics Inc. https://doi.org/10.2514/6.2013-3785.
   Google Scholar
• Tong, Yiheng, Mao Li, Marcus Thern, Jens Klingmann, Wubin Weng, Shuang Chen, and Zhongshan Li. 2017. “Experimental Investigation on Effects of Central Air Jet on the Bluff-Body Stabilized Premixed Methane-Air Flame.” Energy Procedia 107 (February): 23–32. doi:10.1016/J.EGYPRO.2016.12.125.
   Google Scholar
• Tritton, D. J. 1959. “Experiments on the Flow Past a Circular Cylinder at Low Reynolds Numbers.” Journal of Fluid Mechanics 6 (4): 547–567. doi:10.1017/S0022112059000829.
   Web of Science ®Google Scholar
• Udhayakumar, M., P. Saravanan, and K. M. Parammasivam. 2021. “Experimental Study of a Winglet Added Small Wind Turbine with a Flanged Diffuser for Domestic Applications.” International Journal of Ambient Energy 1–5. doi:10.1080/01430750.2021.1993335.
   Web of Science ®Google Scholar
• Umyshev, Dias R., Abay M. Dostiyarov, Musagul Y. Tumanov, and Qiuwang Wang. 2017. “Experimental Investigation of V-Gutter Flameholders.” Thermal Science 21 (2): 1011–1019. doi:10.2298/TSCI151209072U.
   Web of Science ®Google Scholar
• van Driest, E. R. 1951. “Turbulent Boundary Layer in Compressible Fluids.” Journal of the Aeronautical Sciences 18 (3): 145–160. doi:10.2514/8.1895.
   Web of Science ®Google Scholar
• Wan, Jianlong, and Aiwu Fan. 2021. “Recent Progress in Flame Stabilization Technologies for Combustion-Based Micro Energy and Power Systems.” Fuel 286 (February): 119391. doi:10.1016/J.FUEL.2020.119391.
   Google Scholar
• Yahagi, Yuji, M. Sekiguti, and Kenjiro Suzuki. 2007. “Flow Structure and Flame Stability in a Micro Can Combustor with a Baffle Plate.” Applied Thermal Engineering 27 (4): 788–794. doi:10.1016/j.applthermaleng.2006.10.019.
   Web of Science ®Google Scholar
• Yang, Jing Tang, and Go Long Tsai. 1992. “The Wake Flow Structure of an Open-Slit V Gutter.” Experimental Thermal and Fluid Science 5 (6): 685–696. doi:10.1016/0894-1777(92)90112-I.
   Web of Science ®Google Scholar
• Yang, Jing Tang, and Go Long Tsai. 1993. “Near-Wake Flow of a V-Gutter With Slit Bleed (Data Bank Contribution).” Journal of Fluids Engineering 115 (1): 13–20. doi:10.1115/1.2910096.
   Web of Science ®Google Scholar
• Yang, Jing-Tang, Chang-Wu Yen, and Go-Long Tsai. 1994. “Flame Stabilization in the Wake Flow Behind a Slit V-Gutter.” Combustion and Flame 99: 288–294.
   Web of Science ®Google Scholar
• Yuce, Mehmet Ishak, and Dalshad Ahmed Kareem. 2016. “A Numerical Analysis of Fluid Flow Around Circular and Square Cylinders.” Journal – American Water Works Association 108: E546–E554. doi:10.5942/jawwa.2016.108.0141.
   Web of Science ®Google Scholar