Influence of 3D printing on transport: a theory and experts judgment based conceptual model

References

• Barz, A., Buer, T., & Haasis, H.-D. (2016). Quantifying the effects of additive manufacturing on supply networks by means of a facility location-allocation model. Logistics Research, 9(1), 29. doi: 10.1007/s12159-016-0140-0
   Google Scholar
• Bhattacharjya, J., Tripathi, S., Taylor, A., Taylor, M., & Walters, D. (2014). Additive manufacturing: Current status and future prospects (pp. 365–372). Berlin: Springer . doi: 10.1007/978-3-662-44745-1_36
   Google Scholar
• Bogers, M., Hadar, R., & Bilberg, A. (2016). Additive manufacturing for consumer-centric business models: Implications for supply chains in consumer goods manufacturing. Technological Forecasting and Social Change, 102, 225–239. doi: 10.1016/j.techfore.2015.07.024
   Web of Science ®Google Scholar
• Bradshaw, S., Bowyer, A., & Haufe, P. (2010). The intellectual property implications of low-cost 3D printing. ScriptEd, 7(1), 5–31.
   Google Scholar
• Bryman, A. (2015). Social research methods. Oxford: Oxford University Press.
   Google Scholar
• Campbell, T., Williams, C., Ivanova, O., & Garrett, B. (2011). Could 3D printing change the world? Washington, DC: Atlantic Council.
   Google Scholar
• Chan, H. K., & Chan, F. T. S. (2010). Comparative study of adaptability and flexibility in distributed manufacturing supply chains. Decision Support Systems, 48(2), 331–341. doi: 10.1016/j.dss.2009.09.001
   Web of Science ®Google Scholar
• Chen, D., Heyer, S., Ibbotson, S., Salonitis, K., Steingrímsson, J. G., & Thiede, S. (2015). Direct digital manufacturing: Definition, evolution, and sustainability implications. Journal of Cleaner Production, 107, 615–625. doi: 10.1016/j.jclepro.2015.05.009
   Web of Science ®Google Scholar
• Christopher, M., & Ryals, L. J. (2014). The supply chain becomes the demand chain. Journal of Business Logistics, 35(1), 29–35. doi: 10.1111/jbl.12037
   Web of Science ®Google Scholar
• De Jong, J. P. J., & De Bruijn, E. (2013). Innovation lessons from 3-D printing. MIT Sloan Management Review, 54(2), 43–52.
   Web of Science ®Google Scholar
• Despeisse, M., Baumers, M., Brown, P., Charnley, F., Ford, S. J., Garmulewicz, A., … Rowley, J. (2016). Unlocking value for a circular economy through 3D printing: A research agenda. Technological Forecasting and Social Change. doi: 10.1016/j.techfore.2016.09.021
   PubMed Web of Science ®Google Scholar
• Diez, T. (2012). Personal fabrication: Fab labs as platforms for citizen-based innovation, from microcontrollers to cities. Nexus Network Journal, 14(3), 457–468. doi: 10.1007/s00004-012-0131-7
   Web of Science ®Google Scholar
• The Economist. (2016, April 30). A printed smile - 3D printing is coming of age as a manufacturing technique.
   Google Scholar
• Fawcett, S. E., & Waller, M. A. (2014). Can we stay ahead of the obsolescence curve? On inflection points, proactive preemption, and the future of supply chain management. Journal of Business Logistics, 35(1), 17–22. doi: 10.1111/jbl.12041
   Web of Science ®Google Scholar
• Ford, S., & Despeisse, M. (2016). Additive manufacturing and sustainability: An exploratory study of the advantages and challenges. Journal of Cleaner Production, 137, 1573–1587. doi: 10.1016/j.jclepro.2016.04.150
   Web of Science ®Google Scholar
• Fornasiero, R., Chiodi, A., Carpanzano, E., & Carneiro, L. (2010). Research issues on customer-oriented and eco-friendly networks for healthy fashionable goods (pp. 36–44). Berlin: Springer. doi: 10.1007/978-3-642-14341-0_5
   Google Scholar
• Frazier, W. E. (2014). Metal additive manufacturing: A review. Journal of Materials Engineering and Performance, 23(6), 1917–1928. doi: 10.1007/s11665-014-0958-z
   Web of Science ®Google Scholar
• Garrett, B. (2014). 3D printing: New economic paradigms and strategic shifts. Global Policy, 5(1), 70–75. doi: 10.1111/1758-5899.12119
   Web of Science ®Google Scholar
• Gausemeier, J. E. (2014). Thinking ahead the future of additive manufacturing e innovation road mapping of required advancements. Paderborn: Heinz Nixdorf Institute.
   Google Scholar
• Gress, D. R., & Kalafsky, R. V. (2015). Geographies of production in 3D: Theoretical and research implications stemming from additive manufacturing. Geoforum, 60, 43–52. doi: 10.1016/j.geoforum.2015.01.003
   Web of Science ®Google Scholar
• Griffiths, A. (2002). Rapid manufacturing – The next industrial revolution. Materials World, 10(12), 34–35.
   Google Scholar
• Holmström, J., Holweg, M., Khajavi, S. H., & Partanen, J. (2016). The direct digital manufacturing (r)evolution: Definition of a research agenda. Operations Management Research, 9(1–2), 1–10. doi: 10.1007/s12063-016-0106-z
   Web of Science ®Google Scholar
• Holmström, J., Partanen, J., Tuomi, J., & Walter, M. (2010). Rapid manufacturing in the spare parts supply chain. Journal of Manufacturing Technology Management, 21(6), 687–697. doi: 10.1108/17410381011063996
   Google Scholar
• Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013). Additive manufacturing and its societal impact: A literature review. The International Journal of Advanced Manufacturing Technology, 67(5–8), 1191–1203. doi: 10.1007/s00170-012-4558-5
   Web of Science ®Google Scholar
• Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., … Masanet, E. (2016). Energy and emissions saving potential of additive manufacturing: The case of lightweight aircraft components. Journal of Cleaner Production, 135, 1559–1570. doi: 10.1016/j.jclepro.2015.04.109
   Web of Science ®Google Scholar
• Janssen, R., Blankers, I., Moolenburgh, E., & Posthumus, B. (2014). The impact of 3-D printing on supply chain management. Delft: TNO.
   Google Scholar
• Jia, F., Wang, X., Mustafee, N., & Hao, L. (2016). Investigating the feasibility of supply chain-centric business models in 3D chocolate printing: A simulation study. Technological Forecasting and Social Change, 102, 202–213. doi: 10.1016/j.techfore.2015.07.026
   Web of Science ®Google Scholar
• Jonsson, P., & Holmström, J. (2016). Future of supply chain planning: Closing the gaps between practice and promise. International Journal of Physical Distribution & Logistics Management, 46(1), 62–81. doi: 10.1108/IJPDLM-05-2015-0137
   Web of Science ®Google Scholar
• Kanto, L., Alahuhta, P., Kukko, K., Pihlajamaa, J., Partanen, J., Vartiainen, M., & Berg, P. (2014). Management of Engineering & Technology (PICMET) (pp. 784–795). Portland: Portland International Center for Management of Engineering and Technology.
   Google Scholar
• Kohtala, C., & Hyysalo, S. (2015). Anticipated environmental sustainability of personal fabrication. Journal of Cleaner Production, 99, 333–344. doi: 10.1016/j.jclepro.2015.02.093
   Web of Science ®Google Scholar
• Kreiger, M. A., Mulder, M. L., Glover, A. G., & Pearce, J. M. (2014). Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament. Journal of Cleaner Production, 70, 90–96. doi: 10.1016/j.jclepro.2014.02.009
   Web of Science ®Google Scholar
• Kuipers, B. H., van Rooden, A. D. M., van de Ven, A. A., & Wierikx, C. M. (1995). De logistieke wereld bezien door de bril van de overheid. Tijdschrift Vervoerswetenschap, 31(1), 55–73.
   Google Scholar
• Laplume, A. O., Petersen, B., & Pearce, J. M. (2016). Global value chains from a 3D printing perspective. Journal of International Business Studies, 47(5), 595–609. doi: 10.1057/jibs.2015.47
   Web of Science ®Google Scholar
• Li, Y., Jia, G., Cheng, Y., & Hu, Y. (2016). Additive manufacturing technology in spare parts supply chain: A comparative study. International Journal of Production Research, 03, 1–18. doi: 10.1080/00207543.2016.1231433
   Web of Science ®Google Scholar
• Lopes da Silva, J. V., & Vicente, J. (2013). 3D technologies and the new digital ecosystem. In Proceedings of the fifth international conference on management of emergent digital EcoSystems - MEDES “13 (pp. 278–284). New York, NY: ACM Press. doi: 10.1145/2536146.2536187
   Google Scholar
• Manners-Bell, J., & Lyon, K. (2012). The implications of 3D printing for the global logistics industry. Bath, UK: Transport Intelligence.
   Google Scholar
• Mckinnon, A. (2016). The possible impact of 3D printing and drones on last-mile logistics: An exploratory study. Built Environment, 42(4), 617–629. doi: 10.2148/benv.42.4.617
   Google Scholar
• Mohr, S., & Khan, O. (2015). Innovations and strategies for logistics and supply chains. In Wolfgang H. C. Kersten, Thorsten Blecker, & Christian M. Ringle (Eds.), Proceedings of the Hamburg International Conference of Logistics (HICL) (pp. 147–174). Hamburg: epubli GmbH.
   Google Scholar
• Mokhtarian, P. L., & Chen, C. (2004). TTB or not TTB, that is the question: A review and analysis of the empirical literature on travel time (and money) budgets. Transportation Research Part A: Policy and Practice, 38(9), 643–675. doi: 10.1016/j.tra.2003.12.004
   Web of Science ®Google Scholar
• Mourtzis, D., & Doukas, M. (2013). Decentralized manufacturing systems review: Challenges and outlook (pp. 355–369). Berlin: Springer. doi: 10.1007/978-3-642-30749-2_26
   Google Scholar
• Murphy, S. V., & Atala, A. (2014). 3D bioprinting of tissues and organs. Nature Biotechnology, 32(8), 773–785. doi: 10.1038/nbt.2958
   PubMed Web of Science ®Google Scholar
• PWC. (2014). 3D printing and the new shape of industrial manufacturing. Pittsburgh: PWC.
   Google Scholar
• Rauch, E., Dallasega, P., & Matt, D. T. (2016). Sustainable production in emerging markets through distributed manufacturing systems (DMS). Journal of Cleaner Production, 135, 127–138. doi: 10.1016/j.jclepro.2016.06.106
   Web of Science ®Google Scholar
• Rayna, T., & Striukova, L. (2016). From rapid prototyping to home fabrication: How 3D printing is changing business model innovation. Technological Forecasting and Social Change, 102, 214–224. doi: 10.1016/j.techfore.2015.07.023
   Web of Science ®Google Scholar
• Rifkin, J. (2011). The third industrial revolution. London: Palgrave MacMillan.
   Google Scholar
• Rogers, H., Baricz, N., & Pawar, K. S. (2016). 3D printing services: Classification, supply chain implications and research agenda. International Journal of Physical Distribution & Logistics Management, 46(10), 886–907. doi:10.1108/IJPDLM-07-2016-0210
   Web of Science ®Google Scholar
• Romero, A., & Vieira, D. R. (2016). How additive manufacturing improves product lifecycle management and supply chain management in the aviation sector? (pp. 74–85). Cham: Springer . doi: 10.1007/978-3-319-33111-9_8
   Google Scholar
• Tavasszy, L., & de Jong, G. (2013). Modelling freight transport. Amsterdam: Elsevier.
   Google Scholar
• Tavasszy, L. A., Ruijgrok, C. J., & Thissen, M. J. P. M. (2003). Emerging global logistics networks: Implications for transport systems and policies. Growth and Change, 34(4), 456–472. doi: 10.1046/j.0017-4815.2003.00230.x
   Web of Science ®Google Scholar
• Tuck, C., Hague, R., & Burns, N. (2007). Rapid manufacturing: Impact on supply chain methodologies and practice. International Journal of Services and Operations Management, 3(1), 1. doi: 10.1504/IJSOM.2007.011459
   Google Scholar
• United States Postal Service Office of Inspector General. (2014). 3D printing and the U.S. Postal Service. Mary Ann Liebert, Inc., 1(3), 166–168.
   Google Scholar
• Van Wee, B. (2013). The traffic and transport system and effects on accessibility, the environment and safety: An introduction. In B. Van Wee, J. A. Annema, & D. Banister (Eds.), The transport system and transport policy. An introduction (pp. 4–18). Cheltenham: Edward Elgar.
   Google Scholar
• Ye, M. (2015). The impact of 3D printing on the world container transport. Delft: TU Delft.
   Google Scholar