442
Views
21
CrossRef citations to date
0
Altmetric
feature articles

Heat Transfer and Pressure Drop Characteristics of Smooth Horizontal Tubes in the Transitional Flow Regime

&

REFERENCES

  • Liebenberg , L. and Meyer , J. P. 1998 . Potential of the Zeotropic Mixture R-22/R-142b in High-Temperature Heat Pump Water Heaters With Capacity Modulation . ASHRAE Transactions , 104 ( Pt 1A ) : 418 – 429 .
  • Meyer , J. P. and Greyvenstein , G. P. 1991 . Hot Water for Homes in South Africa With Heat Pumps . Energy , 16 ( 7 ) : 1039 – 1044 .
  • Dirker , J. and Meyer , J. P. 2005 . Convective Heat Transfer Coefficients in Concentric Annuli . Heat Transfer Engineering , 26 ( 3 ) : 38 – 44 .
  • Meyer , J. P. and Greyvenstein , G. P. 1992 . Drying of Grain With Heat Pumps in South Africa. A Techno-Economic Analysis . International Journal of Energy Research , 16 ( 1 ) : 13 – 20 .
  • Bukasa , J. -P. M. , Liebenberg , L. and Meyer , J. P. 2004 . Heat Transfer Performance During Condensation Inside Spiralled Micro-Fin Tubes . Journal of Heat Transfer , 126 ( 3 ) : 321 – 328 .
  • Smit , F. J. , Thome , J. R. and Meyer , J. P. 2002 . Heat Transfer Coefficients During Condensation of the Zeotropic Refrigerant Mixture HCFC-22/HCFC-142b . Journal of Heat Transfer , 124 ( 6 ) : 1137 – 1146 .
  • Kakaç , S. and Boilers . 1991 . Evaporators and Condensers , New York , NY : Wiley .
  • Obot , N. T. , Esen , E. B. and Rabas , T. J. 1990 . The Role of Transition in Determining Friction and Heat Transfer in Smooth and Rough Passages, . International Journal of Heat and Mass Transfer , 33 ( 10 ) : 2133 – 2143 .
  • ASHRAE . 2009 . “ Fluid Flow ” . In ASHRAE Handbook—Fundamentals , 4 Atlanta , GA : American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. .
  • Cengel , Y. A. and Ghajar , A. J. 2011 . Heat and Mass Transfer, Fundamentals and Applications, . , 4th ed , New York , NY : McGraw-Hill .
  • Tam , H. K. , Tam , L. M. and Ghajar , A. J. 2013 . Effect of Inlet Geometries and Heating on the Entrance and Fully-Developed Friction Factors in the Laminar and Transition Regions of a Horizontal Tube . Experimental Thermal and Fluid Science , 44 : 680 – 696 .
  • Tam , L. M. and Ghajar , A. J. 2006 . Transitional Heat Transfer in Plain Horizontal Tubes . Heat Transfer Engineering , 27 ( 5 ) : 23 – 38 .
  • Ghajar , A. J. , Tam , L. M. and Tam , S. K. 2004 . Improved Heat Transfer Correlation in the Transition Region for a Circular Tube With Three Inlet Configurations Using Artificial Neural Networks . Heat Transfer Engineering , 25 ( 2 ) : 30 – 40 .
  • Ghajar , A. J. and Tam , L. M. 1994 . Heat Transfer Measurements and Correlations in the Transition Region for a Circular Tube With Three Different Inlet Configurations . Experimental Thermal and Fluid Science , 8 : 79 – 90 .
  • Olivier , J. A. Single-phase Heat Transfer and Pressure Drop of Water Inside Horizontal Circular Smooth and Enhanced Tubes with Different Inlet Configurations in the Transitional Flow Regime . Department of Mechanical and Aeronautical Engineering, University of Pretoria, Pretoria, South Africa , Ph.D. Thesis
  • Meyer , J. P. , Liebenberg , L. and Olivier , J. A. Pressure Drop Inside a Smooth Tube with Different Inlet Geometries in the Transitional Flow Regime for Water Cooled at a Constant Wall Temperature . Proceedings of the 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics (ExHFT7), Krakow, Poland , pp. 1265 – 1272 . 28 June to 3 July
  • Meyer , J. P. , Liebenberg , L. and Olivier , J. A. Heat Transfer Characteristics of Smooth Circular Tubes With Different Inlet Geometries in the Transitional Flow Regime . Proceedings of the 14th IAHR Cooling Tower and Air-Cooled Heat Exchanger Conference, Stellenbosch, 1–3 December, Paper OP05 ,
  • Meyer , J. P. and Olivier , J. A. Heat Transfer and Pressure Drop Characteristics of Circular Smooth Tubes in the Transitional Flow Regime . Proceedings of the 19th International Congress of Chemical and Process Engineering CHISA 2010and the 7th European Congress of Chemical Engineering ECCE7, Prague, Paper: I6.1 , 28 August–1 September
  • Olivier , J. A. and Meyer , J. P. 2010 . Single-Phase Heat Transfer and Pressure Drop of the Cooling of Water Inside Smooth Tubes for Transitional Flow With Different Inlet Geometries (RP-1280) . HVAC&R Research , 16 ( 4 ) : 471 – 496 .
  • Meyer , J. P. and Olivier , J. A. 2011 . Transitional Flow Inside Enhanced Tubes for Fully Developed and Developing Flow with Different Types of Inlet Disturbances: Part I—Adiabatic Pressure Drop . International Journal for Heat and Mass Transfer , 54 ( 7–8 ) : 1587 – 1598 .
  • Meyer , J. P. and Olivier , J. A. 2011 . Transitional Flow Inside Enhanced Tubes for Fully Developed and Developing Flow with Different Types of Inlet Disturbances: Part II—Heat Transfer . International Journal for Heat and Mass Transfer , 54 ( 7–8 ) : 1598 – 1607 .
  • Morel , T. 1975 . Comprehensive Design of Axisymmetric Wind Tunnel Contractions . Journal of Fluids Engineering , 97 : 225 – 233 .
  • Durst , F. , Ray , S. , Unsal , B. and Bayoumi , O. A. 2005 . The Development Lengths of Laminar Pipe and Channel Flows . Journal of Fluids Engineering , 127 : 154 – 1160 .
  • Kline , S. J. and McClintock , F. A. 1953 . Describing Uncertainties in Single-Sample Experiments . Mechanical Engineering , 75 : 3 – 8 .
  • IAPWS . 2003 . Uncertainties in Enthalpy for the IAPWS Formulation 1995 for the Thermodynamic Properties of Ordinary Water Substance for General and Scientific use (IAPWS-95) and the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam (IAPWS-IF97) . Advisory Note ,
  • Wagner , W. and Pruß , A. 2002 . The IAPWS Formulation 1995 for the Thermodynamic Properties of Ordinary Water Substance for General and Scientific Use . Journal of Physical and Chemical Reference Data , 31 : 387 – 535 .
  • Sieder , E. N. and Tate , G. E. 1936 . Heat Transfer and Pressure Drop in Liquids in Tubes . Industrial and Engineering Chemistry , 28 ( 12 ) : 1429 – 1435 .
  • Tam , L. M. and Ghajar , A. J. 1997 . Effect of Inlet Geometry and Heating on the Fully Developed Friction Factor in the Transition Region of a Horizontal Tube . Experimental Thermal and Fluid Science , 15 : 52 – 64 .
  • Filonenko , G. K. On Friction Factor for a Smooth Tube . All Union Thermotechnical Institute, Izvestija VTI, no. 10, Russia ,
  • Lienhard , J. H. and Lienhard , J. H. 2003 . A Heat Transfer Text Book, . , 3rd ed , Cambridge , UK : Phlogiston Press .
  • Gnielinski , V. 1976 . New Equation for Heat and Mass Transfer in Turbulent Pipe and Channel Flow . International Chemical Engineering , 16 : 359 – 368 .
  • Nunner , W. 1956 . Heat Transfer and Pressure Drop in Rough Tubes . VDI-Forschungsheft , 455-B5-39
  • Mikesell , R. D. The Effects of Heat Transfer on the Flow in a Horizontal Pipe . Chemical Engineering Department, University of Illinois, Urbana, IL , Ph.D. Thesis
  • Faris , G. N. and Viskanta , R. 1969 . An Analysis of Laminar Combined Forced and Free Convection Heat Transfer in a Horizontal Tube . International Journal of Heat and Mass Transfer , 12 : 1295 – 1309 .
  • Hishida , M. , Nagano , Y. and Montesclaros , M. S. 1982 . Combined Forced and Free Convection in the Entrance Region of an Isothermally Heated Horizontal Pipe . Journal of Heat Transfer , 104 : 153 – 159 .
  • Oliver , D. R. 1962 . The Effect of Natural Convection on Viscous-Flow Heat Transfer in Horizontal Tubes . Chemical Engineering Science , 17 : 335 – 350 .
  • Shome , B. and Jensen , M. K. 1995 . Mixed Convection Laminar Flow and Heat Transfer of Liquids in Isothermal Horizontal Circular Ducts . International Journal of Heat and Mass Transfer , 38 ( 11 ) : 1945 – 1956 .
  • Colburn , A. P. 1933 . A Method of Correlating Forced Convection Heat Transfer Data and a Comparison With Fluid Friction . Transactions of the American Institute of Chemical Engineers , 19 : 174 – 210 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.