Thermal Behavior in Rectangular Channel Duct Fitted With V-Shaped Perforated Baffles

REFERENCES

• Tanasawa, T., Nishio, S., Takano, S.K., and Tado, M., Enhancement of Forced Convection Heat Transfer in a Rectangular Channel Using Turbulence Promoters, Proc. ASME-JSME Thermal Engineering Joint Conf., pp. 395–402, 1983.
   Google Scholar
• Hwang, J.J., and Liou, T.M., Augmented heat transfer in a rectangular channel with permeable ribs mounted on the wall, ASME Journal of Heat Transfer, vol. 116, pp. 912–920, 1994.
   Web of Science ®Google Scholar
• Hwang, J.J., and Liou, T.M., Heat Transfer in a Rectangular Channel With Perforated Turbulence Promoters Using Holographic Interferometry Measurement, International Journal of Heat and Mass Transfer, vol. 38, pp. 3197–3207, 1995.
   Web of Science ®Google Scholar
• Liou, T.M., and Chen, S.H., Turbulent Heat and Fluid Flow in a Passage Disturbed by Detached Perforated Ribs of Different Heights, International Journal of Heat and Mass Transfer, vol. 41, pp. 1795–1806, 1998.
   Web of Science ®Google Scholar
• Hwang, J.J., Lia, T.Y., and Liou, T.M, Effect of Fence Thickness on Pressure Drop and Heat Transfer in a Perforated Fence Channel, International Journal of Heat and Mass Transfer vol. 41, pp. 811–816, 1998.
   Web of Science ®Google Scholar
• Sara, O.N., Pekdemir, T., Yapici, S., and Ersahan, H., Thermal Performance Analysis for Solid and Perforated Blocks Attached on a Flat Surface in Duct Flow, Energy Conversion and Management, vol. 41, pp. 1019–1028, 2000.
   Web of Science ®Google Scholar
• Dutta, P., and Hossain, A., Internal Cooling Augmentation in Rectangular Channel Using Two Inclined Baffles, International Journal of Heat and Fluid Flow, vol. 26, pp. 223–232, 2005.
   Web of Science ®Google Scholar
• Karwa, R., Maheshwari, B.K., and Karwa, N., Experimental Study of Heat Transfer Enhancement in an Asymmetrically Heated Rectangular Duct With Perforated Baffles, International Communications in Heat and Mass Transfer, vol. 32, pp. 275–284, 2005.
   Web of Science ®Google Scholar
• Karwa, R., and Maheshwari, B.K., Heat Transfer and Friction in an Asymmetrically Heated Rectangular Duct With Half and Fully Perforated Baffles at Different Pitches, International Communications in Heat and Mass Transfer, vol. 36, pp. 264–268, 2009.
   Web of Science ®Google Scholar
• Chamoli, S., and Thakur, N.S., Numerical Based Heat Transfer and Friction Factor Correlations of Rectangular Ducts Roughened With Transverse Perforated Baffles, Walalaik Journal of Science and Technology, 2013. doi:10.2004/wjst.v10i5.594.
   Google Scholar
• Yakar, G., and Karabacak, R., Effects of Different Fin Spacings on the Nusselt Number and Reynolds Number in Perforated Finned Heat Exchangers, Heat Transfer Engineering, vol. 32, pp. 399–407, 2011.
   Web of Science ®Google Scholar
• Gao, X., and Sunden, B., Heat Transfer and Pressure Drop Measurements in Rib Roughened Rectangular Ducts, International Journal of Heat and Mass Transfer, vol. 37, pp. 315–320, 2001.
   Web of Science ®Google Scholar
• Han, J.C., Zhang, Y.M., and Lee, C.P., Augmented Heat Transfer in Square Channels With Parallel, Crossed, and V Shaped Angled Ribs, ASME Journal of Heat Transfer, vol. 113, pp. 590–596, 1991.
   Web of Science ®Google Scholar
• Karwa, R., Experimental Studies of Augmented Heat Transfer and Friction in Asymmetrical Heated Rectangular Ducts With Ribs on the Heated Wall in Transverse, Inclined, V-Continuous and V-Discrete Pattern, International Communications in Heat and Mass Transfer, vol. 30, pp. 241–250, 2003.
   Web of Science ®Google Scholar
• Kukreja, R.T., Lau, S.C., and McMillin, R.D., Local Heat/Mass Transfer Distribution in a Square Channel With Full and V Shaped Ribs, International Journal of Heat and Mass Transfer, vol. 36, pp. 2013–2020, 1993.
   Web of Science ®Google Scholar
• Lau, S.C., McMillin, R.D., and Han, J.C., Heat Transfer Characteristics of Turbulent Flow in a Square Channel With Angled Discrete Ribs, Journal of Turbo Machinery, vol. 113, pp. 367–374, 1991.
   Web of Science ®Google Scholar
• Wright, L.M., Fu, W.L., and Han, J.C., Thermal Performance of Angled, V Shaped, and W Shaped Rib Turbulators in Rotating Rectangular Cooling Channels (AR = 4:1), Journal of Turbo Machinery, vol. 126, pp. 604–614, 2004.
   Web of Science ®Google Scholar
• Bhagoria, J.L., Saini, J.S., and Solanki, S.C., Heat Transfer Coefficient and Friction Factor Correlations for Rectangular Solar Air Heater Duct Having Transverse Wedge Shaped Rib Roughness on the Absorber Plate, Renewable Energy, vol. 25, pp. 341–369, 2002.
   Web of Science ®Google Scholar
• Han, J.C., and Zhang, Y.M., High Performance Heat Transfer Ducts With Parallel Broken V Shaped Ribs, International Journal of Heat and Mass Transfer, vol. 35, pp. 513–523, 1992.
   Web of Science ®Google Scholar
• Cho, H.H., Kim, Y.Y., Rhee, D.H, Lee, S.Y., and Wu, S.J., The Effect of Gap Position in Discrete Ribs on Local Heat/Mass Transfer in a Square Duct, Journal of Enhanced Heat Transfer, vol. 3, pp. 287–300, 2003.
   Web of Science ®Google Scholar
• Gao, X., and Sunden, B., Heat Transfer and Pressure Drop Measurements in Rib Roughened Rectangular Ducts, Experiment Thermal Fluid Science, vol. 124, pp. 25–34, 2001.
   Web of Science ®Google Scholar
• Karwa, R., Bairwa, R. D., Jain, B.P., and Karwa, N., Experimental Study of the Effects of Rib Angle and Discretization on Heat Transfer and Friction in an Asymmetrically Heated Rectangular Duct, Enhanced Heat Transfer, vol. 12, pp. 343–355, 2005.
   Web of Science ®Google Scholar
• Momin, A.M. E, Saini, J.S., and Solanki, S.C., Heat Transfer and Friction in Solar Air Heater Duct With V-Shaped Rib Roughness on Absorber Plate, International Journal of Heat and Mass Transfer, vol. 45, pp. 3383–3396, 2002.
   Web of Science ®Google Scholar
• Aharwal, K.R., Gandhi, B.K., and Saini, J.S, Experimental Investigation on Heat-Transfer Enhancement Due to a Gap in an Inclined Continuous Rib Arrangement in a Rectangular Duct of Solar Air Heater, Renewable Energy, vol. 33, pp. 585–596, 2008.
   Web of Science ®Google Scholar
• Sara, O.N., Pekdemir, T., Yapici, S., and Yilmaz, M., Heat Transfer Enhancement in a Channel Flow With Perforated Rectangular Blocks, International Journal of Heat and Fluid Flow, vol. 22, pp. 509–518, 2001.
   Web of Science ®Google Scholar
• ASHRAE Standard 93-97, Method of Testing to Determine the Thermal Performance of Solar Collector, New York, NY, 1977.
   Google Scholar
• Kline, S.J., and McClintock, F.A., Describing Uncertainties in Single Sample Experiments, Mechanical Engineering (Am. Soc. Mech. Eng), vol. 75, pp. 3–8, 1953.
   Google Scholar
• Kays, W.H., and Perkin, H., Forced Convection Internal Flow in Ducts, McGraw-Hill, New York, NY, 1990.
   Google Scholar
• Bhatti, M.S., and Shah, R.K., Turbulent and Transition Convective Heat Transfer in Ducts, Wiley, New York, NY, 1987.
   Google Scholar