1,484
Views
64
CrossRef citations to date
0
Altmetric
feature articles

A Review of Heat Transfer and Pressure Drop Correlations for Laminar Flow in Curved Circular Ducts

&

REFERENCES

  • Naphon, P., and Wongwises, S., A Review of Flow and Heat Transfer Characteristic in Curved Tubes, Renewable and Sustainable Energy Reviews, vol. 10, pp. 463–490, 2006.
  • Sudarsan, A.P., and Ugaz, V.M., Fluid Mixing in Planar Spiral Microchannels, Journal of the Royal Society of Chemistry, vol. 6, pp. 74–82, 2006.
  • Oddy, M.H., Santiago, J.G., and Mikkelsen, J.C., Electrokinetic Instability Micromixing, Analytical Chemistry, vol. 73, pp. 5822–5832, 2001.
  • Lu, L.H., Ryu, K.S., and Liu, C.J., Fabrication of a 3D Active Mixer Based on Deformable Fe-Doped PDMS Cones with Magnetic Actuation, Journal of Microelectromechanical System, vol. 11, pp. 462–469, 2002.
  • Liu, R.H., Yang, J., Pinder, M.Z., Athavale, M., and Grodzinski, P., Microfluidic Chip Based Microarray Analysis, Lab Chip, vol. 2, pp. 151–156, 2002.
  • Bartoli, C., and Baffigi, F., Effects of Ultrasonic Waves on the Heat Transfer Enhancement in Subcooled Boiling, Experimental Thermal and Fluid Science, vol. 35, no. 3, pp. 423–432, 2011.
  • Webb, R.L., and Kim, N.H., Principles of Enhanced Heat Transfer, Taylor and Francis, Philadelphia, PA, 2005.
  • Nigam, K., Vashisth, S., and Kumar, V., A Review on the Potential Applications of Curved Geometries in Process Industry, Industrial Engineering Chemistry Research, vol. 47, pp. 3291–3337, 2008.
  • Naphon, P., and Wongwises, S., Heat Transfer Coefficients Under Dry and Wet-Surface Conditions for a Spirally Coiled Finned Tube Heat Exchanger, International Communication in Heat and Mass Transfer, vol. 32, pp. 371–385, 2005.
  • Naphon, P., and Wongwises, S., A Study of the Heat Transfer Characteristics of a Compact Spiral Coil Heat Exchanger Under Wet-Surface Conditions, Experimental Thermal Fluid Science, vol. 29, no. 4, pp. 511–521, 2005.
  • Naphon, P., and Wongwises, S., Heat Transfer Characteristics of a Spirally Coiled, Finned-Tube Heat Exchanger Under Dry-Surface Conditions, Heat Transfer Engineering, vol. 27, no. 1, pp. 25–34, 2006.
  • Naphon, P., Performance and Pressure Drop of the Helical Coil Heat Exchangers With and Without Helically Crimped Fins, International Journal of Heat and Mass Transfer, vol. 34, pp. 321–330, 2007.
  • Louw, W.I., and Meyer, J.P., Heat Transfer during Annular Tube Contact in a Helically Coiled Tube-in-Tube Heat Exchanger, Heat Transfer Engineering, vol. 26, no. 6, pp. 16–21, 2005.
  • Ghorbani, N., Taherian, H., Gorji, M., and Mirgolbabaei, H., An Experimental Study of Thermal Performance of Shell-and-Coil Heat Exchangers, International Communication in Heat and Mass Transfer, vol. 37, no. 7, pp. 775–781, 2010.
  • Ding, W.K., Fan, J.F., He, Y.L., Tao, W.Q., Zheng, Y.X., Gao, Y.F., and Song, J., A General Simulation Model for Performance Prediction of Plate Fin-and-Tube Heat Exchanger with Complex Circuit Configuration, Applied Thermal Engineering, vol. 31, pp. 3106–3116, 2011.
  • Thompson, J., On the Origin of Windings of River and Alluvial Planes, With Remarks on the Flow of Water Round Bends in Pipes, Proceeding R. Soc. London, Ser. A, vol. 5, no. 1, pp. 5–8, 1876.
  • Williams, G.S., Hubbell, C.W., and Fenkel, G.H., On the Effect of Curvature on the Flow of Water Pipes, Transaction of American Society Civil Engineering, vol. 47, pp. 1–196, 1902.
  • Grindley, J.H., and Gibson, A.H., On the Frictional Resistance of Air Through a Pipe, Proceedings of Royal Society of London, Serial A, vol. 80, pp. 114–139, 1908.
  • Eustice, J., Experiments of Streamline Motion in Curved Pipes, Proceedings of Royal Society of London, Serial A, vol. 85, pp. 114–139, 1911.
  • Boothroyd, A., Spiral Heat Exchanger, in International Encyclopedia of Heat and Mass Transfer, eds. G. Hewitt and Y. Pulezhaev, CRC Press, New York, NY, p. 1044, 1997.
  • Chonwdhury, K.C., Linkmeyer, H., and Bassiouny, M.K., Analytical Studies on the Temperature Distribution in Spiral Plate Heat Exchangers: Straightforward Design Formulate for Efficiency and Mean Temperature Difference, Journal of Chemical Engineering Process, vol. 19, pp. 183–190, 1985.
  • Burmeister, L.C., Effectiveness of Spiral-Plate Heat Exchanger with Equal Capacitance Rate, Journal of Heat Transfer, vol. 128, pp. 195–301, 2006.
  • Taylor, G.I., and Yarrow, F. R.S., The Criterion for Turbulence in Curved Pipes, Proceedings of Royal Society of London, Serial A, vol. 124, pp. 243–249, 1929.
  • Rennie, T.J., Numerical and Experimental Studies of a Double-Pipe Helical Heat Exchanger, Ph.D. Thesis, McGill University, Montreal, Canada, 2004.
  • Kumar, V., Faizee, B., Mridha, M., and Nigam, K. D.P., Numerical Studies of a Tube-in-Tube Helically Coiled Heat Exchange, Chemical Engineering Process, vol. 47, no. 12, pp. 2287–2295, 2008.
  • Shokouhmand, H., Salimpour, M.R., and Akhavan-Behabadi, M.A., Experimental Investigation of Shell and Coiled Tube Heat Exchangers Using Wilson Plots, International Communication in Heat and Mass Transfer, vol. 35, pp. 84–92, 2011.
  • Rose, J.W., Wilson Plot and Accuracy of Thermal Measurements, Experimental Thermal and Fluid Science, vol. 28, pp. 77–86, 2004.
  • Wei, C., Lin, Y., and Wang, C., A Performance Comparison Between Coiled and Straight Capillary Tubes, Heat Transfer Engineering, vol. 21, no. 2, pp. 62–66, 2010.
  • Naphon, P., and Nakharintr, L., Heat Transfer of Nanofluids in the Mini-Rectangular Fin Heat Sinks, International Communication in Heat Mass Transfer, vol. 40, pp. 25–31, 2013.
  • Hashemi, S.M., and Akhavan-Behabadi, M.A., An Empirical Study on Heat Transfer and Pressure Drop Characteristics of CuO–Base Oil Nanofluid Flow in a Horizontal Helically Coiled Tube Under Constant Heat Flux, International Communication in Heat and Mass Transfer, vol. 39, pp. 144–151, 2012.
  • Fakoor-Pakdaman, M., Akhavan-Behabadi, M.A., and Razi, P., An Empirical Study on the Pressure Drop Characteristics of Nanofluid Flow Inside Helically Coiled Tubes, International Journal of Thermal Science, vol. 65, pp. 206–213, 2013.
  • Kockmann, N., and Roberge, D., Transitional Flow and Related Transport Phenomena in Curved Microchannels, Heat Transfer Engineering, vol. 32, pp. 595–608, 2011.
  • Nunge, R.J., Lin, T.S., and Grill, W.N., Laminar Dispersion in Curved Tubes and Channels, Journal of Fluid Mechanics, vol. 52, pp. 363–383, 1972.
  • Kallinikos, L.E., and Papayannakos, N.G., Intensification of Hydrodesulphurization Process With a Structured Bed Spiral Mini-Reactor, Chemical Engineering and Processes Intensification, vol. 49, no. 10, pp. 1025–1030, 2010.
  • Kaur, J., and Agrawal, G.P., Studies on Protein Transmission in Thin Channel Flow Module: The Role of Dean Vortices for Improving Mass Transfer, Journal of Membrane Science, vol. 196, pp. 1–11, 2002.
  • Ito, Y., Spiral Column Configuration for Protein Separation by High-Speed Counter Current Chromatography, Chemical Engineering and Processing: Process Intensification, vol. 49, no. 7, pp. 782–792, 2010.
  • Abdessalem, S.B., Durand, B., Aksebi, S., Chakfe, N., and Kretz, J.-G., Numerical Simulation of Blood flow in a Curved Textile Vascular Prosthesis, Journal of the Textile Institute, vol. 96, no. 2, pp. 117–122, 2005.
  • Pechar, M., and Pola, R., The Coiled Motif in Polymer Drug Delivery Systems, Biotechnology Advances, vol. 31, no. 1, pp. 90–96, 2013.
  • Guan, X., and Mathonen, T., Simulations of Flow in Curved Tubes, Aerosol Science and Technology, vol. 26, no. 6, pp. 485–504, 1997.
  • Dravid, A.N., Smith, K.A., Merrill, E.W., and Brian, P. L.T., Effect of Secondary Fluid Motion on Laminar Flow Heat Transfer in Helically Coiled Tubes, American Institution of Chemical Engineers, vol. 17, no. 5, pp. 1114–1122, 1971.
  • Abdel-Aziz, M.H., Mansour, I. A.S., and Sedahmed, G.H., Study of the Rate of Liquid–Solid Mass Transfer Controlled Processes in Helical Tubes Under Turbulent Flow Conditions, Chemical Engineering and Processing: Process Intensification, vol. 49, no. 7, pp. 643–648, 2010.
  • Chen, C.N., Han, J.T., Jen, T.C., and Shao, L., Thermo-Chemical Characteristics of R134a Flow Boiling in Helically Coiled Tubes at Low Mass Flux and Low Pressure, Thermochimica Acta, vol. 512, pp. 163–169, 2011.
  • Cheng, K.C., and Akiyama, M., Laminar Forced Convection Heat Transfer in Curved Rectangular Channels, Microfluid Nanofluid, Journal of Heat Transfer, vol. 13, pp. 471–490, 1970.
  • Cheng, K.C., and Akiyama, M., Graetz Problem in Curved Pipes With Uniform Wall Heat Flux, International Journal of Research and Reviews in Applied Sciences, vol. 29, pp. 401–417, 1974.
  • Guo, L.J., Feng, Z.P., and Chen, X., Transient Convective Heat Transfer of Steam–Water Two-Phase Flow in a Helical Tube Under Pressure Drop Type Oscillations, International Journal of Heat and Mass Transfer, vol. 45, no. 3, pp. 533–542, 2002.
  • Murphy, S., Delfos, R., Pourquie, M. J. B. M., Olujic, Z., Jansens, P.J., and Nieuwstadt, F. T.M., Prediction of Strongly Swirling Flow Within an Axial Hydrocyclone Using Two Commercial CFD Codes, Chemical Engineering Science, vol. 62, no. 6, pp. 1619–1635, 2007.
  • Sankarish, M., and Rao, Y.V., Analysis of Steady Laminar Flow of an Incompressible Newtonian Fluid Through Curved Pipes of Small Curvature, Journal of Fluids Engineering, no. 72-WA/Fe19, 1973.
  • Patankar, S.V., Pratab, V.S., and Spalding, D.B., Prediction of Laminar Flow and Heat Transfer in Helically Coiled Pipes, Journal of Fluid Mechanics, vol. 62, no. 3, pp. 539–551, 1974.
  • Patankar, S.V., Pratab, V.S., and Spalding, D.B., Prediction of Turbulent Flow in Curved Pipes, Journal of Fluid Mechanics, vol. 67, no. 3, pp. 583–595, 1975.
  • Tyagi, V.P., and Sharma, K., An Analysis of Steady Fully Developed Heat Transfer in Laminar Flow with Viscous Dissipation in a Curved Circular Ducts, International Journal of Heat and Mass Transfer, vol. 18, pp. 69–78, 1975.
  • Kreith, F., The Influence of Curvature on Heat Transfer to Incompressible Fluids, Transactions of the ASME, vol. 79, pp. 1246–1256, 1955.
  • Masliyah, J.H., and Nandakumar, K., Fully Developed Laminar Flow in a Helical Tube of a Finite Pitch, Chemical Engineering Communications, vol. 29, pp. 125–138, 1984.
  • Kakac, S., Shah, R.K., and Aung, W., Handbook of Single-Phase Convective Heat Transfer, Wiley-Interscience, Hoboken, NJ, 1987.
  • Dean, W.R., Note on the Motion of Fluid in a Curved Pipe, London, Edinburgh and Dublin Philosophical Magazine and Journal of Science, vol. 4, pp. 208–223, 1927.
  • Dean, W.R., The streamline Flow Through Curved Pipes, 6th International Conference on Multiphase Flow, London, Edinburgh and Dublin Philosophical Magazine and Journal of Science, vol. 5, pp. 673–695, 1928.
  • Truesdell, L.C., Jr., and Adler, R.J., Numerical Treatment of Fully Developed Laminar Flow in Helically Coiled Tubes, American Institute of Chemical Engineers, vol. 40, pp. 1010–1015, 1970.
  • Shah, R.K., and London, A.L., Laminar Flow Forced Convection in Ducts, Supplement 1 to Advances in Heat Transfer, Academic Press, New York, NY, 1978.
  • Keulegan, G.H., and Beiji, K.H., Pressure Losses for Fluid Flows in Curved Pipes, Journal of Research of NIST, vol. 18, pp. 89–144, 1937.
  • Austin, L.R., and Seader, J.D., Entry Region for Steady Viscous Flow in Coiled Circular Pipes, American Institute of Chemical Engineers, vol. 20, pp. 820–822, 1974.
  • Newson, I.H., and Hodgson, T.D., The Development of Enhanced Heat Transfer Condenser Tubing, Atomic Energy Research Establishment, vol. 14, no. 3, pp. 291–323, 1974.
  • Yao, L.S., and Berger, S.A., Entry Flow in a Curved Pipe, Journal of Fluid Mechanics, vol. 67, no. 1, pp. 177–196, 1975.
  • Agrawal, Y., Talbot, L., and Geong, K., Laser Anemometer Study of Flow Development on Curved Circular Pipes, Journal of Fluid Mechanics, vol. 85, no. 3, pp. 497–518, 1978.
  • Moulin, P., Veyretb, D., and Charbit, F., Dean Vortices: Comparison of Numerical Simulation of Shear Stress and Improvement of Mass Transfer in Membrane Processes at Low Permeation Fluxes, Journal of Membrane Science, vol. 183, no. 2, pp. 149–162, 2001.
  • Smith, F.T., Pulsatile Flow in Curved Pipes, Journal of Fluid Mechanics, vol. 20, pp. 820–822, 1974.
  • Smith, F.T., Fluid Flow into a Curved Pipe, Proceedings of Royal Society of London, Serial A: Mathematical and Physical Science, vol. 331, pp. 71–87, 1976.
  • Singh, M.P., Entry Flow in Curved Pipes, Journal of Fluid Mechanics, vol. 65, no. 3, pp. 517–539, 1974.
  • Humphrey, A.C., Numerical Calculations of Developing Laminar Flow in Pipes of Arbitrary Curvature Radius, American Journal of Chemical Engineering, vol. 56, no. 2, pp. 151–164, 1978.
  • Liu, N.S., Developing Flow in a Curved Pipe, INSERM-Euromech, vol. 92, pp. 53–64, 1977.
  • Soh, W.Y., and Berger, S.A., Laminar Entrance Flow in a Curved Pipe, Journal of Fluid Mechanics, vol. 148, pp. 109–135, 1984.
  • So, R.M., Zhang, H.S., and Lai, Y.G., Secondary Cells and Separation in Developing Laminar Curved-Pipe Flows, Theoretical and Computational Fluid Dynamics, vol. 3, no. 3, pp. 141–162, 1991.
  • Choi, U.S., Talbot, L., and Cornet, E., Experimental Study of Wall Shear Rates in the Entry Region of a Curved Tube, Journal of Fluid Mechanics, vol. 93, pp. 465–489, 1979.
  • Stewartson, K., Cebeci, T., and Chang, K.C., A Boundary Layer Collision in a Curved Duct, The Quarterly Journal of Mechanics and Applied Mathematics, vol. 33, pp. 59–75, 1980.
  • Stewartson, K., and Simpson, C.J., On a Singularity Initiating a Boundary-Layer Collision, The Quarterly Journal of Mechanics and Applied Mathematics, vol. 35, pp. 1–16, 1982.
  • Ebadian, M.A., Zheng, B., and Lin, C.X., Combined Laminar Forced Convection and Thermal Radiation in a Helical Pipe, International Journal of Heat and Mass Transfer, vol. 43, pp. 1067–1078, 2000.
  • Tarbell, J.M., and Samuels, M.R., Momentum and Heat Transfer in Helical Coils, Chemical Engineering Journal- Lausanne (Netherlands), vol. 5, pp. 117–127, 1973.
  • Dravid, A.N., Smith, K.A., Merill, E.W., and Brian, L.T., Effect of Secondary Fluid Motion on Laminar Flow Heat Transfer in Helically Coiled Tubes, AICHE Journal, vol. 17, pp. 1114–1122, 1971.
  • Janssen, L. A.M., and Hoogendoorn, C.J., Laminar Convection Heat Transfer in Helical Coiled Tubes, International Journal of Heat and Mass Transfer, vol. 21, pp. 1197–1206, 1978.
  • Lin, C.X., and Ebadian, M.A., Developing Turbulent Convective Heat Transfer in Helical Pipes, International Journal of Heat and Mass Transfer, vol. 40, pp. 3861–3873, 1997.
  • Lin, C.X., Zhang, P., and Ebadian, M.A., Laminar Forced Convection in the Entrance Region of Helical Pipes, International Journal of Heat and Mass Transfer, vol. 40, pp. 3293–3304, 1997.
  • Sillekens, J. J.M., Rindt, C. C.M., and van Steenhoven, A.A., Developing Mixed Convection in a Coiled Heat Exchanger, International Journal of Heat and Mass Transfer, vol. 41, no. 1, pp. 61–72, 1998.
  • Kubair, V., and Kuloor, N.R., Heat Transfer to Newtonian Fluids in Coiled Pipes in Laminar Flow, International Journal of Heat and Mass Transfer, vol. 9, pp. 63–75, 1966.
  • Kalb, C.E., and Seader, J.D., Entrance Region Heat Transfer in a Uniform Wall-Temperature Helical Coil With Transition From Turbulent to Laminar Flow, International Journal of Heat and Mass Transfer, vol. 26, no. 1, pp. 23–32, 1983.
  • Oliver, D.R., and Ashar, S.M., Heat Transfer in Newtonian and Viscoelastic Liquids During Laminar Flow in Helical Coils, Transaction Institution Chemical Engineers, vol. 54, pp. 218–224, 1976.
  • Ghobadi, M., and Muzychka, Y.S., Effect of Entrance Region and Curvature on Heat Transfer in Mini Scale Curved Tubing at Constant Wall Temperature, International Journal of Heat and Mass Transfer, vol. 65, pp. 357–365, 2013.
  • Yao, L.S., Heat Convection in a Horizontal Curved Pipe, Journal of Heat Transfer, vol. 106, pp. 71–77, 1984.
  • Liu, S., and Masliyah, J.H., Developing Convective Heat Transfer in Helical Pipes With Finite Pitch, International Journal of Heat and Fluid Flow, vol. 15, no. 1, pp. 66–75, 1994.
  • Nobari, M. R.H., Ahrabi, B.R., and Akbari, G., A Numerical Analysis of Developing Flow and Heat Transfer in a Curved Annular Pipe, International Journal of Thermal Sciences, vol. 48, pp. 1542–1551, 2009.
  • Sreenivasan, K.R., and Strykowski, P.J., Stabilization Effects in Flow Through Helically Coiled Pipes, Experiments in Fluids, vol. 1, pp. 31–36, 1983.
  • Webster, D.R., and Humphrey, J. A.C., Experimental Observations of Flow Instabilities in a Helical Coil, ASME Journal of Fluids Engineering, vol. 115, pp. 436–443, 1993.
  • Ito, H., Friction Factors for Turbulent Flow in Curved Pipes, ASME Journal of Basic Engineering Transaction, vol. 81, pp. 123–132, 1959.
  • Srinivasan, P.S., Nadapurkar, S.S., and Holland, F.A., Pressure Drop and Heat Transfer in Coils, Chemical Engineering Journal, vol. 218, pp. CE113–CE119, 1968.
  • Srinivasan, P.S., Nadapurkar, S.S., and Holland, F.A., Friction Factors for Coils, Transactions of the Institution of Chemical Engineers, vol. 48, pp. T156–T161, 1970.
  • Cioncolini, A., and Santini, L., An Experimental Investigation Regarding the Laminar to Turbulent Flow Transition in Helically Coiled Pipes, Experimental Thermal and Fluid Science, vol. 30, no. 4, pp. 367–380, 2006.
  • Cioncolini, A., and Santini, L., On Laminar to Turbulent Flow Transition in Adiabatic Helically Coiled Pipe Flow, Experimental Thermal and Fluid Science, vol. 30, no. 7, pp. 653–661, 2006.
  • Kubair, V., and Varrier, C. B.S., Pressure Drop for Liquid Flow in Helical Coils, Transactions of Indian Institute of Chemical Engineering, vol. 14, pp. 93–97, 1961/1962.
  • Schmidt, D.F., Warmeubarang and Druckverlust in Rohrshlangen, Chemical Engineering Technology, vol. 13, pp. 781–789, 1967.
  • Mishra, P., and Gupta, S.N., Momentum Transfer in Curved Pipes 1. Newtonian Fluids; 2. Non-Newtonian Fluids, Industrial and Engineering Chemistry Process Design and Development, vol. 18, pp. 130–142, 1979.
  • Kubair, V., and Kuloor, N.R., Flow of Newtonian fluids in Archimedean Spiral Tube Coils: Correlation of Laminar, Transition and Turbulent Flows, Indian Journal Of Technology, vol. 4, pp. 3–8, 1966.
  • Piazza, I., and Ciofalo, M., Numerical Prediction of Turbulent Flow and Heat Transfer in Helically Coiled Pipe, International Journal of Thermal Science, vol. 49, pp. 653–663, 2010.
  • Stasiek, J.A., Collins, M.W., and Ciofalo, M., Investigation of Flow and Heat Transfer in Corrugated Passages I. Experimental Results, International Journal of Heat and Mass Transfer, vol. 39, pp. 149–164, 1996.
  • Mori, Y., and Nakayama, W., Study on Forced Convective Heat Transfer in Curved Pipes (1st Report, Laminar Region), International Journal of Heat and Mass Transfer, vol. 8, pp. 67–82, 1965.
  • Adler, M., Flow in Curved Tubes, Zeitschrift fur Angewandte Mathematik und Mechanik (ZAMM), vol. 14, pp. 1659–1675, 1934.
  • Akiyama, M., and Cheng, K.C., Boundary Vorticity Method for Laminar Forced Convection Heat Transfer in Curved Pipes, Intentional Journal of Heat and Mass Transfer, vol. 14, pp. 1659–1675, 1971.
  • Austin, L.R., and Seader, J.D., Fully Developed Viscous Flow in Coiled Pipes, American Institute of Chemical Engineers, vol. 19, pp. 85–94, 1973.
  • Bolinder, C.J., and Sunden, B., Flow Visualization and LDV Measurements of Laminar Flow in a Helical Square Duct With Finite Pitch, Experimental Thermal Fluid Science, vol. 63, pp. 348–363, 1995.
  • Ujhidy, A., Nemeth, J., and Szepvolgyi, J., Fluid Flow in Tubes with Helical Elements, Chemical Engineering Process, vol. 42, pp. 1–7, 2003.
  • Topakoglu, H.C., Steady State Laminar Flow in Incompressible Viscous Fluid in Curved Pipes, Journal of Applied Mathematics and Mechanics, vol. 16, no. 2, pp. 1321–1338, 1967.
  • Larrain, J., and Bonilla, C.F., Theoretical Analysis of Pressure Drop in the Laminar Flow of a Fluid in a Coiled Pipe, Transactions of the Society of Rheology: Journal of Rheology, vol. 14, no. 2, pp. 135–148, 1970.
  • Ito, H., Flow in Curved Pipes, Zeitschrift fur Angewandte Mathematik und Mechanik (ZAMM), vol. 49, pp. 653–662, 1969.
  • Austen, D.S., and Soliman, H.M., Laminar Flow and Heat Transfer in Helically Coiled Tubes With Substantial Pitch, Experimental Thermal Fluid Science, vol. 1, pp. 183–194, 1988.
  • Yamamoto, K., Yanase, S., and Yoshida, T., Torsion Effect on the Flow in a Helical Pipe, Journal of Fluid Dynamics Research, vol. 14, pp. 259–273, 1994.
  • Yamamoto, K., Akita, T., Ikeuchi, H., and Kita, Y., Experimental Studies of the Flow in Helical Circular Tube, Journal of Fluid Dynamics Research, vol. 16, pp. 237–249, 1995.
  • Yamamoto, K., Aribowo, A., Hayamizu, Y., Hirose, T., and Kawahara, K., Visualization of the Flow in a Helical Pipe, Journal of Fluid Dynamics Research, vol. 30, pp. 251–167, 2002.
  • Grundman, R., Friction Diagram of the Helically Coiled Tube, Chemical Engineering and Processing: Process Intensification, vol. 19, pp. 113–115, 1985.
  • Takahashi, M., and Momozaki, Y., Pressure Drop and Heat Transfer of a Mercury Single-Phase Flow and an Air–Mercury Two-Phase Flow in a Helical Tube Under a Strong Magnetic Field, Chemical Engineering and Processing: Process Intensification, vol. 51, pp. 869–877, 2000.
  • Ghobadi, M., and Muzychka, Y.S., Pressure Drop in Mini-Scale Tubing, Experimental Thermal and Fluid Science, vol. 7, pp. 57–64, 2014.
  • Manlapaz, R.L., and Churchill, S.W., Fully Developed Laminar Flow in Helically Coiled of Finite Pitch, Chemical Engineering Communication, vol. 7, pp. 57–78, 1980.
  • White, C.M., Fluid Friction and Its Relation to Heat Transfer, Transactions of Institution of Chemical Engineering (London), vol. 10, pp. 66–86, 1929.
  • Prandtl, L., Erzeugung von Zirkulationen beim Schütteln von Gefahren, Zeitschrift für Angewandte Mathematik und Mechanik, vol. 29, no. 1, pp. 8–9, 1949.
  • Hasson, D., Streamline Flow Resistance in Coils, Reservoir Correspondence, vol. 1, p. S1, 1955.
  • Rao, M.V., and Sadasivudu, D., Pressure Drop Studies in Helical Coils, Indian Journal of Technology, vol. 12, pp. 473–474, 1974.
  • Gnielinski, V., Correlations for the Pressure Drop in Helically Coiled Tubes, International Journal of Chemical Engineering, vol. 26, pp. 36–44, 1986.
  • Xin, R.C., Awad, A., Dong, Z.F., and Ebadian, M.A., An Experimental Study of Single-Phase and Two-Phase Flow Pressure Drop in Annular Helicoidal Pipes, International Journal of Heat and Fluid Flow, vol. 18, pp. 482–488, 1997.
  • Ali, S., Pressure Drop Correlations for Flow Through Regular Helical Coil Tubes, Journal of Fluid Dynamics Research, vol. 28, pp. 295–310, 2001.
  • Ju, H., Huang, Z., Xu, Y., Duan, B., and Yu, Y., Hydraulic Performance of Small Bending Radius Helical Coil-pipe, Nuclear Science Technology, vol. 18, pp. 826–831, 2001.
  • Guo, L., Feng, Z., and Chen, X., An Experimental Investigation of the Friction Pressure Drop of Steam-Water Two Phase Flow in Helical Coils, International Journal of Heat and Mass Transfer, vol. 44, pp. 2601–2610, 2001.
  • Barua, S.N., On Secondary Flow in Stationary Curved Pipes, Quarterly Journal of Mechanics and Applied Mathematics, vol. 6, pp. 61–77, 1963.
  • Collins, W.M., and Dennis, S. C.R., The Steady Motion of a Viscous Fluid in a Curved Tube, Quarterly Journal of Mechanics and Applied Mathematics, vol. 28, pp. 133–156, 1975.
  • Van Dyke, M., Extended Stokes Series: Laminar flow Through a Loosely Coiled Pipes, Journal of Fluid Mechanics, vol. 86, pp. 129–145, 1978.
  • Dennis, S. C.R., Calculation of the Steady Flow Through a Curved Tube Using a New Finite-Difference Scheme, Journal of Fluid Mechanics, vol. 99, pp. 449–467, 1980.
  • Hart, J., Ellenberger, J., and Hamersma, P.J., Single and Two-Phase Flow Through Helically Coiled Tubes, Chemical Engineering Science, vol. 45, no. 4, pp. 775–783, 1988.
  • Yanase, S., Goto, N., and Yamamoto, K., Dual Solution of the Flow Through a Curved Tube, Fluid Dynamics Research, vol. 5, pp. 191–201, 1989.
  • Ferng, Y.M., Lin, W.C., and Chieng, C.C., Numerical Investigated of Effects of Different Dean Number and Pitch Size on Flow and Heat Transfer Characteristics in a Helically Coil-Tube Heat Exchanger, Applied Thermal Engineering, vol. 36, pp. 378–385, 2012.
  • Pimenta, T.A., and Campos, J. B. L. M., Newtonian and Non-Newtonian Fluids Flowing in Laminar Regime in a Helical Coil, Experimental Thermal and Fluid Science, vol. 36, pp. 194–204, 2012.
  • Rahimi, M., and Beigzadeh, R., Prediction of Heat Transfer and Flow Characteristics in Helically Coiled Tubes Using Artificial Neural Networks, International Communications in Heat and Mass Transfer, vol. 39, pp. 1279–1285, 2012.
  • Hawe, W.B., Some Sidelights on the Heat Transfer Problems, Transactions of the Institution of Chemical Engineering, vol. 10, pp. 161–167, 1932.
  • Balejova, M., Cakrt, J., and Mick, V., Non-Isothermal Laminar Flow in Curved Pipes, Applied Scientific Research, vol. 32, pp. 587–592, 1976.
  • Balejova, M., Cakrt, J., and Mick, V., Heat Transfer for Laminar Flow in Curved Pipes With Uniform Wall Heat Flux, International Scientific Journal Acta Technica, vol. 22, no. 2, pp. 183–195, 1977.
  • Ievlev, V.M., Dzyubenko, B.V., Dreitser, G.A., and Vilemas, Y.V., In-Line and Cross-Flow Helical Tube Heat Exchangers, International Journal of Heat and Mass Transfer, vol. 25, pp. 317–323, 1982.
  • Prasad, B. V.S., Das, D.H., and Prabhakar, A.K., Pressure Drop, Heat Transfer and Performance of a Helically Coiled Tubular Exchanger, Journal of Heat Recovery Systems, vol. 9, pp. 249–256, 1989.
  • Inagaki, Y., Koiso, H., Takumi, H., Ioka, I., and Miyamoto, Y., Thermal Hydraulic Study on a High-Temperature Gas-Gas Heat Exchanger With Helically Coiled Tube Bundles, Nuclear Engineering and Design, vol. 185, pp. 141–155, 1998.
  • Havas, G., Deak, A., and Sawinsky, J., Heat Transfer to Helical Coils in Agitated Vessels, Chemical Engineering Journal, vol. 35, pp. 61–64, 1987.
  • Ali, M.E., Experimental Investigation of Natural Convection from Vertical Helical Coiled Tubes, International Journal of Heat and Mass Transfer, vol. 37, pp. 665–671, 1994.
  • Ali, M.E., Laminar Natural Convection From Constant Heat Flux Helical Coiled Tubes, International Journal of Heat and Mass Transfer, vol. 41, pp. 2175–2182, 1998.
  • Ali, M.E., Natural Convection Heat Transfer from Vertical Helical Coils in Oil, Heat Transfer Engineering, vol. 27, no. 3, pp. 79–85, 2007.
  • Bai, B., Guo, L., Feng, Z., and Chen, X., Turbulent Heat Transfer in a Horizontally Coiled Tube, Heat Transfer—Asian Research, vol. 28, pp. 395–403, 1999.
  • Yang, V.G., Dong, Z.F., and Ebadian, M.A., Laminar Forced Convection in a Helicoidal Pipe with Finite pitch, International Journal of Heat and Mass Transfer, vol. 38, pp. 853–862, 1995.
  • Yang, V.G., and Ebadian, M.A., Turbulent Forced convection in a Helicoidal Pipe with Substantial Pitch, International Journal of Heat and Mass Transfer, vol. 39, pp. 2015–2022, 1995.
  • Jayakumar, J.M., Mahajani, S.M., Mandal, J.C., Vijayan, P.K., and Bho, R., Experimental and CFD Estimation of Heat Transfer in Helically Coiled Heat Exchangers, Chemical Engineering Research and Design, vol. 86, pp. 221–232, 2008.
  • Salimpour, M.R., Heat Transfer Coefficients of Shell and Coiled Tube Heat Exchangers, Experimental Thermal and Fluid Science, vol. 33, pp. 203–207, 2009.
  • Acharya, N., Sen, M., and Chang, H.C., Heat Transfer Enhancement in Coiled Tubes by Chaotic Mixing, International Journal of Heat and Mass Transfer, vol. 35, pp. 2475–2489, 1992.
  • Acharya, N., Sen, M., and Chang, H.C., Analysis of Heat Transfer Enhancement in Coiled-Tube Heat Exchangers, International Journal of Heat and Mass Transfer, vol. 44, pp. 3198–3199, 2001.
  • Lemenand, T., and Peerhossaini, H., A Thermal Model for Prediction of the Nusselt Number in a Pipe With Chaotic Flow, Applied Thermal Engineering, vol. 22, pp. 1717–1730, 2002.
  • Ke, Y., Pei-qi, G., and Hai-tao, M., Numerical Simulation on Heat Transfer Characteristic of Conical Spiral Tube Bundle, Applied Thermal Engineering, vol. 31, pp. 284–292, 2011.
  • Zachar, A., Investigation of Natural Convection Induced Outer Side Heat Transfer Rate of Coiled-tube Exchangers, International Journal of Heat and Mass Transfer, vol. 55, pp. 7892–7901, 2012.
  • Mori, Y., and Nakayama, W., Study on Forced Convective Heat Transfer in Curved Pipes (Third Report, Theoretical Analysis under the Condition of Uniform Wall Temperature and Practical Formula), International Journal of Heat and Mass Transfer, vol. 10, pp. 681–695, 1967.
  • Jeschke, D., Heat Transfer and Pressure Loss in Coiled Pipes, Ergaenzungsheft Z. Ver. Dtsch. Ing., vol. 68, pp. 24–28, 1925.
  • Merkel, E., Die Grundlagen Der Warmeubertragung, T. Steinkopff, Dresden, The Netherlands, p. 51, 1927.
  • Liu, S., and Masliyah, J.H., A Decoupling Numerical Method for Fluid Flow, International Journal of Numerical Methods Fluids, vol. 16, no. 8, pp. 659–682, 1993.
  • Futagami, K., and Aoyama, Y., Laminar Heat Transfer in a Helically Coiled Tube, International Journal of Heat and Mass Transfer, vol. 31, no. 2, pp. 387–396, 1988.
  • Naphon, P., and Suwagrai, J., Effect of Curvature Ratios on the Heat Transfer and Flow Developments in the Horizontal Spirally Coiled Tubes, International Journal of Heat and Mass Transfer, vol. 50, pp. 444–451, 2007.
  • Zapryanov, Z., Christon, C.H., and Toshev, E., Fully Developed Laminar Flow and Heat Transfer in Curved Tubes, International Journal of Heat and Mass Transfer, vol. 23, pp. 873–880, 1980.
  • Prabhanjan, D.F., Raghavan, G. S.V., and Rennie, T.J., Comparison of Heat Transfer Rates Between a Straight Tube Heat Exchanger and a Helically Coiled Heat Exchanger, International Communications in Heat and Mass Transfer, vol. 29, pp. 185–191, 2002.
  • Prabhanjan, D.G., Rennie, T.J., Raghavan, G. S.V., Natural Convective Heat Transfer From Helical Coiled Tubes, International Journal of Thermal Science, vol. 43, pp. 359–365, 2004.
  • Jha, R.K., and Rao, R., Heat Transfer Through Coiled Tubes in Agitated Vessels, International Journal of Heat and Mass Transfer, vol. 10, pp. 395–397, 1967.
  • Shchukin, V.K., Correlation for Experimental Data on Heat Transfer in Curved Pipes, Thermal Engineering, vol. 16, pp. 72–76, 1969.
  • Yildiz, C., Bicer, Y., and Pehlivan, D., Heat Transfer and Pressure Drop in a Heat Exchanger With a Helical Pipe Containing inside Springs, Energy Conversion Management, vol. 38, no. 6, pp. 619–624, 1997.
  • Salimpour, M.R., Heat Transfer Characteristics of a Temperature-Dependent-Property Fluid in Shell and Coiled Tube Heat Exchangers, International Communications in Heat and Mass Transfer, vol. 32, pp. 1190–1195, 2008.
  • Pawar, S.S., and Sunnapwar, V.K., Experimental Studies on Heat Transfer to Newtonian and Non-Newtonian Fluids in Helical Coils with Laminar and Turbulent Flow, Experimental Thermal and Fluid Science, vol. 44, pp. 792–804, 2013.
  • Rainieri, S., Bozzoli, F., and Pagliarini, G., Experimental Investigation on the Convective Heat Transfer in Straight and Coiled Corrugated Tubes for Highly Viscous Fluids: Preliminary Results, International Journal of Heat and Mass Transfer, vol. 55, pp. 498–504, 2012.
  • Rainieri, S., Bozzoli, F., Gattani, L., and Pagliarini, G., Compound Convective Heat Transfer Enhancement in Helically Coiled Wall Corrugated Tubes, International of Journal Heat and Mass Transfer, vol. 59, pp. 353–362, 2013.
  • Maekawa, H., Heat Transfer to Fully Developed Laminar Flow in a Gently Curved Pipe, Preprint of 1st Japan Heat Transfer Symposium, pp. 13–16, 1964.
  • Akiyama, M., and Cheng, K.C., Laminar Forced Convection Heat Transfer in Curved Pipes With Uniform Wall Temperature, International Journal of Heat and Mass Transfer, vol. 15, pp. 1426–1431, 1972.
  • Kalb, C.E., and Seader, J.D., Fully Developed Viscous Flow, Heat Transfer in Curved Tubes With Uniform Wall Temperatures, American Institute of Chemical Engineers Journal, vol. 20, pp. 340–346, 1974.
  • Manlapaz, R.L., and Churchill, S.W., Fully Developed Laminar Convection From a Helical Coil, Chemical Engineering Communication, vol. 97, pp. 185–200, 1981.
  • Ghoabdi, M., Experimental Measurement and Modelling of Heat Transfer in Spiral and Curve Channels, Ph.D. Thesis. Memorial University of Newfoundland, St. John’s, Newfoundland, Canada, 2013.
  • Ghobadi, M., and Muzychka, Y.S., Fully Developed Heat Transfer in Coiled Tube Under Isothermal Wall Condition, International Journal of Heat and Mass Transfer, vol. 72, pp. 87–97, 2014.
  • Berger, R.R., and Bonilla, C.F., Heating of Fluids in Coils, Academic Science, New York, NY, vol. , pp. 12–25, 1950.
  • Seban, R.A., and McLaughlin, E.F., Heat Transfer in Tube Coils With Laminar and Turbulent Flow, International Journal of Heat and Mass Transfer, vol. 6, pp. 387–395, 1963.
  • Jensen, M.K., and Bergles, A.E., Critical Heat Flux in Helical Coils With a Circumferential Heat Flux Tilt Toward the Outside Surface, International Journal of Heat and Mass Transfer, vol. 25, no. 9, pp. 1383–1395, 1982.
  • Kirpov, A.V., Heat Transfer in Helically Coiled Pipes, Trudi, Moscov Institution Khim. Mashinojtrojenija, vol. 12, pp. 43–56, 1957.
  • Roger, G. F.C., and Mayhew, Y.R., Heat Transfer and Pressure Loss in Helically Tubes With Turbulent Flow, International of Journal Heat and Mass Transfer, vol. 7, pp. 1207–1216, 1964.
  • Singh, S. P.N., and Bell, K.J., Laminar Flow in Heat Transfer in a Helically Coiled Tube, Proceeding 5th International Heat Transfer Conference, Tokyo, vol. 2, pp. 193–197, 1974.
  • Yildiz, C., Bicer, Y., and Pehlivan, D., Heat Transfer and Pressure Drops in Rotating Helical Pipes, Applied Energy, vol. 50, pp. 85–94, 1995.
  • Xin, R.C., and Ebadian, M.A., The Effect of Prandtl Numbers on Local and Average Convective Heat Transfer Characteristics in Helical Pipes, Journal of Heat Transfer, vol. 119, pp. 463–473, 1997.
  • Moawed, M., Experimental Study of Forced Convection From Helical Coiled Tubes With Different Parameters, Energy Conservation Management, vol. 52, pp. 1150–1156, 2011.
  • Mori, Y., and Nakayama, W., Study on Forced Convective Heat Transfer in Curved Pipes, International Journal of Heat and Mass Transfer, vol. 10, pp. 37–59, 1967.
  • Ozisik, M.N., and Topakoglu, H.C., Heat Transfer for Laminar Flow in a Curved Pipe, Journal of Heat Transfer, vol. 90, pp. 313–318, 1968.
  • Kalb, C.E., and Seader, J.D., Heat and Mass Transfer Phenomena for Viscous Flow in Curved Circular Tubes, International Journal of Heat and Mass Transfer, vol. 15, pp. 801–817, 1972.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.