308
Views
2
CrossRef citations to date
0
Altmetric
Original Articles

Experimental Study on Subcooled Flow Boiling in Horizontal Microtubes and Effect of Heated Length

&

References

  • Agostini, B., Fabbri, M., Park, J. E., Wojtan, L., Thome, J. R., and Michel, B., State of the Art of High Heat Flux Cooling Technologies, Heat Transfer Engineering, vol. 28, no. 4, pp. 258–281, 2007.
  • Kosar, A., Flow boiling in microscale at high flowrates, in Proceedings of the ASME 9th International Conference on Nanochannels, Microchannels and Minichannels, American Society Mechanical Engineers, Edmonton, Canada, pp. 569–582, 2011.
  • Magnini, M., Pulvirenti, B., and Thome, J. R., Numerical Investigation of Hydrodynamics and Heat Transfer of Elongated Bubbles During Flow Boiling in a Microchannel, International Journal of Heat and Mass Transfer, vol. 59, pp. 451–471, 2013.
  • Kaya, A., Demiryürek, R., Armağan, E., Ozaydin-Ince, G., Sezen, M., and Koşar, A., Boiling Heat Transfer Enhancement in Mini/Microtubes via Polyhydroxyethylmethacrylate (pHEMA) Coatings on Inner Microtube Walls at High Mass Fluxes, Journal of Micromechanics and Microengineering, vol. 23, no. 11, pp. 1–10, 2013.
  • Demir, E., Izci, T., Alagoz, A. S., Karabacak, T., and Koşar, A., Effect of Silicon Nanorod Length on Horizontal Nanostructured Plates in Pool Boiling Heat Transfer With Water, International Journal of Thermal Sciences, vol. 82, pp. 111–121, 2014.
  • Çıkım, T., Armağan, E., Ince, G. O., and Koşar, A., Flow Boiling Enhancement in Microtubes With Crosslinked pHEMA Coatings and the Effect of Coating Thickness, Journal of Heat Transfer, vol. 136, no. 8, pp. 46–57, 2014.
  • Taitel, Y., and Dukler, A. E., A Model for Predicting Flow Regime Transitions in Horizontal and Near Horizontal Gas-Liquid Flow, AIChE Journal, vol. 22, no. 1, pp. 47–55, 1976.
  • Shah, M. M., Improved General Correlation for Critical Heat Flux During Upflow in Uniformly Heated Vertical Tubes, International Journal of Heat and Fluid Flow, vol. 8, no. 4, pp. 326–335, 1987.
  • Hall, D. D., and Mudawar, I., Critical Heat Flux (CHF) for Water Flow in Tubes—II.: Subcooled CHF Correlations, International Journal of Heat and Mass Transfer, vol. 43, no. 14, pp. 2605–2640, 2000.
  • Ribatski, G., Wojtan, L., and Thome, J. R., An Analysis of Experimental Data and Prediction Methods for Two-Phase Frictional Pressure Drop and Flow Boiling Heat Transfer in Micro-Scale Channels, Experimental Thermal and Fluid Science, vol. 31, no. 1, pp. 1–19, 2006.
  • Zhang, W., Hibiki, T., Mishima, K., and Mi, Y., Correlation of Critical Heat Flux for Flow Boiling of Water in Mini-Channels, International Journal of Heat and Mass Transfer, vol. 49, no. 5–6, pp. 1058–1072, 2006.
  • Cioncolini, A., Thome, J. R., and Lombardi, C., Unified Macro-to-Microscale Method to Predict Two-Phase Frictional Pressure Drops of Annular Flows, International Journal of Multiphase Flow, vol. 35, no. 12, pp. 1138–1148, 2009.
  • Ong, C. L., and Thome, J. R., Macro-to-Microchannel Transition in Two-Phase Flow: Part 1—Two-Phase Flow Patterns and Film Thickness Measurements, Experimental Thermal and Fluid Science, vol. 35, no. 1, pp. 37–47, 2011.
  • Ribatski, G., A Critical Overview on the Recent Literature Concerning Flow Boiling and Two-Phase Flows Inside Micro-Scale Channels, Experimental Heat Transfer, vol. 26, no. 2–3, pp. 198–246, 2013.
  • Harirchian, T., and Garimella, S. V., Flow Regime-Based Modeling of Heat Transfer and Pressure Drop in Microchannel Flow Boiling, International Journal of Heat and Mass Transfer, vol. 55, no. 4, pp. 1246–1260, 2012.
  • Kosar, A., A Model to Predict Saturated Critical Heat Flux in Minichannels and Microchannels, International Journal of Thermal Sciences, vol. 48, no. 2, pp. 261–270, 2009.
  • Bertsch, S. S., Groll, E. A., and Garimella, S. V., A Composite Heat Transfer Correlation for Saturated Flow Boiling in Small Channels, International Journal of Heat and Mass Transfer, vol. 52, no. 7, pp. 2110–2118, 2009.
  • Thome, J. R., and Consolini, L., Mechanisms of Boiling in Micro-Channels: Critical Assessment, Heat Transfer Engineering, vol. 31, no. 4, pp. 288–297, 2010.
  • Krishnamurthy, S., and Peles, Y., Flow Boiling Heat Transfer on Micro Pin Fins Entrenched in a Microchannel, Journal of Heat Transfer, vol. 132, no. 4, pp. 54–64, 2010.
  • Kandlikar, S. G., A Scale Analysis Based Theoretical Force Balance Model for Critical Heat Flux (CHF) During Saturated Flow Boiling in Microchannels and Minichannels, Journal of Heat Transfer, vol. 132, no. 8, pp. 60–73, 2010.
  • Pierre, C. C. S., and Bankoff, S. G., Vapor Volume Profiles in Developing Two-Phase Flow, International Journal of Heat and Mass Transfer, vol. 10, no. 2, pp. 237–249, 1967.
  • Liu, Z., and Winterton, R. H. S., A General Correlation for Saturated and Subcooled Flow Boiling in Tubes and Annuli, Based on a Nucleate Pool Boiling Equation, International Journal of Heat and Mass Transfer, vol. 34, no. 11, pp. 2759–2766,1991.
  • Collier, J. G., and Thome, J. R., Convective Boiling and Condensation, Clarendon Press, Oxford, UK, 1994.
  • Kandlikar, S. G., Handbook of Phase Change: Boiling and Condensation, CRC Press, Philadelphia, PA, 1999.
  • Bartel, M. D., Experimental Investigation of Subcooled Boiling, M.Sc. Thesis, Purdue University, West Lafayette, IN, 1999.
  • Mudawar, I., and Bowers, M. B., Ultra-High Critical Heat Flux (CHF) for Subcooled Water Flow Boiling—I: CHF Data and Parametric Effects for Small Diameter Tubes, International Journal of Heat and Mass Transfer, vol. 42, no. 8, pp. 1405–1428, 1999.
  • Lee, T. H., Park, G. C., and Lee, D. J., Local Flow Characteristics of Subcooled Boiling Flow of Water in a Vertical Concentric Annulus, International Journal of Multiphase Flow, vol. 28, no. 8, pp. 1351–1368, 2002.
  • Haynes, B. S., and Fletcher, D. F., Subcooled Flow Boiling Heat Transfer in Narrow Passages, International Journal of Heat and Mass Transfer, vol. 46, no. 19, pp. 3673–3682, 2003.
  • Ghiaasiaan, S. M., Two-Phase Flow, Boiling, and Condensation in Conventional and Miniature Systems, Cambridge University Press, Cambridge, UK, 2008.
  • Wang, G. D., and Cheng, P., Subcooled Flow Boiling and Microbubble Emission Boiling Phenomena in a Partially Heated Microchannel, International Journal of Heat and Mass Transfer, vol. 52, no. 1–2, pp. 79–91, 2009.
  • Kaya, A., Ozdemir, M. R., and Kosar, A., High Mass Flux Flow Boiling and Critical Heat Flux in Microscale, International Journal of Thermal Sciences, vol. 65, pp. 70–78, 2013.
  • Bartel, M. D., Ishii, M., Masukawa, T., Mi, Y., and Situ, R., Interfacial Area Measurements in Subcooled Flow Boiling, Nuclear Engineering and Design, vol. 210, no. 1, pp. 135–155, 2001.
  • Lucas, D., Shi, J., Krepper, E., and Prasser, H., Models for the Forces Acting on Bubbles in Comparison With Experimental Data for Vertical Pipe Flow, in 3rd International Symposium on Two-Phase Flow Modelling and Experimentation, Pisa, Italy, pp. 22–24, 2004.
  • Končar, B., Kljenak, I., and Mavko, B., Modelling of Local Two-Phase Flow Parameters in Upward Subcooled Flow Boiling at Low Pressure, International Journal of Heat and Mass Transfer, vol. 47, no. 6, pp. 1499–1513, 2004.
  • Martín-Callizo, C., Palm, B., and Owhaib, W., Subcooled Flow Boiling of R-134a in Vertical Channels of Small Diameter, International Journal of Multiphase Flow, vol. 33, no. 8, pp. 822–832, 2007.
  • Yuan, M., Wei, J., Xue, Y., and Fang, J., Subcooled Flow Boiling Heat Transfer of FC-72 From Silicon Chips Fabricated With Micro-Pin-Fins, International Journal of Thermal Sciences, vol. 48, no. 7, pp. 1416–1422, 2009.
  • Suzuki, K., Kokubu, T., Nakano, M., Kawamura, H., Ueno, I., Shida, H., and Ogawa, O., Enhancement of Heat Transfer in Subcooled Flow Boiling With Microbubble Emission, Experimental Thermal and Fluid Science, vol. 29, no. 7, pp. 827–832, 2005.
  • Bergles, A., and Rohsenow, W., The Determination of Forced-Convection Surface-Boiling Heat Transfer, Journal of Heat Transfer, vol. 86, no. 3, pp. 365–372, 1964.
  • Kline, S. J., and McClintock, F., Describing Uncertainties in Single-Sample Experiments, Mechanical Engineering, vol. 75, no. 1, pp. 3–8, 1953.
  • Martins, F., Pires, J., and Sousa, S., Statistical Models for Predicting Ozone and PM10 Concentrations, in Modelling of Pollutants in Complex Environmental Systems, ILM Publications, Hertfordshire, UK, pp. 277–290, 2009.
  • Carslaw, D., DEFRA Urban Model Evaluation Analysis—Phase 1, Report to DEFRA, Environmental Research Group, King's College London, UK, April 15, 2011.
  • Kandlikar, S. G., Scale Effects on Flow Boiling Heat Transfer in Microchannels: A Fundamental Perspective, International Journal of Thermal Sciences, vol. 49, no. 7, pp. 1073–1085, 2010.
  • Manning, F. S., and Thompson, R. E., Oilfield Processing of Petroleum: Crude Oil, Pennwell Books, Tulsa, OK, 1995.
  • Swamee, P. K., and Jain, A. K., Explicit Equations for Pipe-Flow Problems, Journal of the Hydraulics Division, vol. 102, no. 5, pp. 657–664, 1976.
  • Shah, R., and London, A., Laminar Flow Forced Convection in Ducts, Advances in Heat Transfer, Academic Press, New York, NY, 1978.
  • Gnielinski, V., New Equations for Heat and Mass-Transfer in Turbulent Pipe and Channel Flow, International Chemical Engineering, vol. 16, no. 2, pp. 359–368, 1976.
  • Kandlikar, S. G., Fundamental Issues Related to Flow Boiling in Minichannels and Microchannels, Experimental Thermal and Fluid Science, vol. 26, no. 2, pp. 389–407, 2002.
  • Crowe, C. T., Elger, D. F., and Roberson, J. A., Engineering Fluid Mechanics, Wiley, New York, NY, 2005.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.