1,465
Views
38
CrossRef citations to date
0
Altmetric
Original Articles

Critical Heat Flux in Flow Boiling—Review of the Current Understanding and Experimental Approaches

, &

References

  • Thakur, A. K., Model: Mechanistic vs Empirical, in New Trends in Pharmacokinetics, Vol. 221 of NATO ASI Series, pp. 41–51, Springer, Boston, MA, 1991.
  • Boyd, R., Review of Subcooled Flow Boiling Critical Heat Flux (CHF) and Its Application to Fusion Energy System Components Part II: Microconvective, Experimental and Correlational Aspects, Fusion Technology, vol. 7, pp. 31–51, 1983.
  • Lee, D., Two-Phase Flow and Heat Transfer, Oxford University Press, Oxford, UK, 1977.
  • Collier, J. G., and Thome, J. R., Convective Boiling and Condensation, Oxford University Press, Oxford, UK, 1994.
  • Whalley, P., Boiling, Condensation, and Gas-Liquid Flow, Oxford University Press, Oxford, UK, 1987.
  • Celata, G., and Mariani, A., CHF and Post-CHF (Post-Dryout) Heat Transfer, in Handbook of Phase Change: Boiling and Condensation, ed. S. G. Kandlikar, Taylor & Francis, Philadelphia, PA, pp. 443–493, 1999.
  • Celata, G., Cumo, M., and Mariani, A., Assessment of Correlations and Models for the Prediction of CHF in Water Subcooled Flow Boiling, International Journal of Heat and Mass Transfer, vol. 37, no. 2, pp. 237–255, 1994.
  • Tong, L. S., Boundary-Layer Analysis of the Flow Boiling Crisis, International Journal of Heat and Mass Transfer, vol. 11, pp. 1208–1211, 1968.
  • Gunther, F. C., Photographic Study of Surface-Boiling Heat Transfer to Water With Forced Convection, Transaction of the ASME, vol. 73, pp. 115–123, 1951.
  • Bowring, R., A Simple But Accurate Round Tube Uniform Heat Flux, Dryout Correlation Over the Pressure Range 0.7–17 MN, UK Atomic Energy Authority, Winfrith, UK, 1972.
  • Katto, Y., and Ohno, H., An Improved Version of the Generalized Correlation of Critical Heat Flux for the Forced Convective Boiling in Uniformly Heated Vertical Tubes, International Journal of Heat and Mass Transfer, vol. 27, no. 9, pp. 1641–1648, 1984.
  • Bertoletti, S., A Generalized Correlation for Predicting the Heat Transfer Crisis With Steam Water Mixtures, Euraec Report No. 1226, European Atomic Energy, Milan, Italy, 1965.
  • Tong, L. S., and Tang, Y. S., Boiling Heat Transfer and Two-Phase Flow, Taylor & Francis, Washington, DC, 1997.
  • Rescigno, A., Beck, J., and Thakur, A., The Use and Abuse of Models, Journal of Pharmacokinetics and Biopharmaceutics, vol. 15, no. 3, pp. 327–340, 1987.
  • Katto, Y., Critical Heat Flux, International Journal of Multiphase Flow, vol. 20, pp. 53–90, 1994.
  • Kandlikar, S. G., Critical Heat Flux in Subcooled Flow Boiling—An Assessment of Current Understanding and Future Directions for Research, Multiphase Science and Technology, vol. 13, pp. 207–232, 2001.
  • Galloway, J., and Mudawar, I., CHF Mechanism in Flow Boiling From a Short Heated Wall—II. Theoretical CHF Model, International Journal of Heat and Mass Transfer, vol. 36, pp. 2527–2540, 1993.
  • Shekriladze, I., Boiling Heat Transfer: Mechanisms, Models, Correlations and the Lines of Further Research, Open Mechanical Engineering Journal, vol. 2, pp. 104–127, 2008.
  • Fiori, M. P., and Bergles, A. E., Model of Critical Heat Flux in Subcooled Flow Boiling, Heat Transfer 1970, Papers Presented at the Fourth International Heat Transfer Conference, Paris–Versailles 1970, Paris, France, 1970.
  • Hino, R., and Ueda, T., Studies on Heat Transfer and Flow Characteristics in Subcooled Flow Boiling—Part 2. Flow Characteristics, International Journal of Multiphase Flow, vol. 11, no. 3, pp. 283–297, 1985.
  • Celata, G. P., Cumo, M., Mariani, A., Simoncini, M., and Zummo, G., Rationalization of Existing Mechanistic Models for the Prediction of Water Subcooled Flow Boiling Critical Heat Flux, International Journal of Heat and Mass Transfer, vol. 37, pp. 347–360, 1994.
  • Kirby, D., and Westwater, J., Bubble and Vapor Behavior on a Heated Horizontal Plate During Pool Boiling Near Burnout, Chem. Eng. Prog. Symp. Ser, vol. 61, pp. 238–248, 1965.
  • Mattson, R. J., A Photographic Study of Subcooled Flow Boiling and the Boiling Crisis in Freon-113, Ph.D. Thesis, University of Michigan, College for Engineering, Department of Mechanical Engineering, Cavitation and Multiphase Flow Laboratory, Ann Arbor, MI, 1972.
  • Bloch, G., Muselmann, W., Saier, M., and Sattelmayer, T., A Phenomenological Study on Effects Leading to the Departure From Nucleate Boiling in Subcooled Flow Boiling, International Journal of Heat and Mass Transfer, vol. 67, pp. 61–69, 2013.
  • Celata, G. P., Cumo, M., and Mariani, A., Enhancement of CHF Water Subcooled Flow Boiling in Tubes Using Helically Coiled Wires, International Journal of Heat and Mass Transfer, vol. 37, pp. 53–67, 1994.
  • Celata, G., Cumo, M., and Mariani, A., Burnout in Highly Subcooled Water Flow Boiling in Small Diameter Tubes, International Journal of Heat and Mass Transfer, vol. 36, no. 5, pp. 1269–1285, 1993.
  • Cheng, L., and Xia, G., Experimental Study of CHF in a Vertical Spirally Internally Ribbed Tube under the Condition of High Pressures, International Journal of Thermal Sciences, vol. 41, no. 4, pp. 396–400, 2002.
  • Boyd, R., Subcooled Water Flow Boiling Experiments Under Uniform High Heat Flux Conditions, Fusion Science and Technology, vol. 13, no. 1, pp. 131–142, 1988.
  • Boyd, R., Subcooled Water Flow Boiling at 1.66 MPa Under Uniform High Heat Flux Conditions, Fusion Science and Technology, vol. 16, no. 3, pp. 324–330, 1989.
  • Boyd, R., Subcooled Water Flow Boiling Transition and the L/D Effect on CHF for a Horizontal Uniformly Heated Tube, Fusion Science and Technology, vol. 18, no. 2, pp. 317–324, 1990.
  • Bloch, G., Schmitt, D., and Sattelmayer, T., Influence of Turbulence Induced by Perforated Plates on Heat Transfer and Critical Heat Flux in Subcooled Flow Boiling, Proceedings of ITP-2011, Dresden, Germany, 2011.
  • Bloch, G., Jochum, C., Schechtl, T., and Sattelmayer, T., Subcooled Flow Boiling in a Rectangular Channel With Added Turbulence and Longitudinal Vortices, Proceedings of the 2012 20th International Conference on Nuclear Engineering collocated with the ASME 2012 Power Conference, Anaheim, CA, 2012.
  • Bloch, G., and Sattelmayer, T., Effects of Turbulence and Secondary Flows on Subcooled Flow Boiling, Heat and Mass Transfer, vol. 50, no. 3, pp. 427–435, 2014.
  • Bergles, A. E., Subcooled Burnout in Tubes of Small Diameter, ASME Paper 63-WA-182, American Society of Mechanical Engineers, New York, NY, 1963.
  • Katto, Y., A Physical Approach to Critical Heat Flux of Subcooled Flow Boiling in Round Tubes, International Journal of Heat and Mass Transfer, vol. 33, pp. 611–620, 1990.
  • Kandlikar, S. G., and Spiesman, P., Effect of Surface Finish on Flow Boiling Heat Transfer, Paper presented at the ASME IMECE98 Meeting, Anaheim, CA, November 1998.
  • Celata, G. P., Cumo, M., and Mariani, A., Geometrical Effects on the Subcooled Flow Boiling Critical Heat Flux, Revue Générale de Thermique, vol. 36, no. 11, pp. 807–814, 1997.
  • Fiori, M. P., and Bergles, A. E., Model of Critical Heat Flux in Subcooled Flow Boiling, Report No. DSR 70281-56, Massachusetts Institute of Technology, Department of Mechanical Engineering, Engineering Projects Laboratory, Cambridge, MA, 1968.
  • Konishi, C., Mudawar, I., and Hasan, M. M., Investigation of Localized Dryout Versus CHF in Saturated Flow Boiling, International Journal of Heat and Mass Transfer, vol. 67, pp. 131–146, 2013.
  • Hebel, W., Detavernier, W., and Decreton, M., A Contribution to the Hydrodynamics of Boiling Crisis in a Forced Flow of Water, Nuclear Engineering and Design, vol. 64, pp. 433–445, 1981.
  • Hebel, W., and Detavernier, W., On the Velocity Profile of Vapour Bubbles at Critical Heat Flux, Nuclear Engineering and Design, vol. 74, pp. 253–257, 1982.
  • Weisman, J., and Pei, B., Prediction of Critical Heat Flux in Flow Boiling at Low Qualities, International Journal of Heat and Mass Transfer, vol. 26, no. 10, pp. 1463–1477, 1983.
  • Weisman, J., and Ying, S., A Theoretically Based Critical Heat Flux Prediction for Rod Bundles at PWR Conditions, Nuclear Engineering and Design, vol. 85, no. 2, pp. 239–250, 1985.
  • Ying, S. H., and Weisman, J., Prediction of Critical Heat Flux in Flow Boiling at Intermediate Qualities, International Journal of Heat and Mass Transfer, vol. 29, pp. 1639–1648, 1986.
  • Lim, J. C., and Weisman, J., A Phenomenologically Based Prediction of the Critical Heat Flux in Channels Containing an Unheated Wall, Internatinal Journal of Heat and Mass Transfer, vol. 33, pp. 203–205, 1990.
  • Weisman, J., Yang, J. Y., and Usman, S., A Phenomenological Model for Boiling Heat Transfer and the Critical Heat Flux in Tubes Containing Twisted Tapes, International Journal of Heat and Mass Transfer, vol. 37, pp. 69–80, 1994.
  • Kwon, Y. M., and Chang, S. H., A Mechanistic Critical Heat Flux Model for Wide Range of Subcooled and Low Quality Flow Boiling, Nuclear Engineering and Design, vol. 188, no. 1, pp. 27–47, 1999.
  • Haramura, Y., and Katto, Y., A New Hydrodynamic Model of Critical Heat Flux, Applicable Widely to Both Pool and Forced Convection Boiling on Submerged Bodies in Saturated Liquids, International Journal of Heat and Mass Transfer, vol. 26, pp. 389–399, 1983.
  • Katto, Y., Prediction of Critical Heat Flux of Subcooled Flow Boiling in Round Tubes, Int. J. Heat Mass Transfer, vol. 33, pp. 1921–1928, 1990.
  • Celata, G. P., Cumo, M., Mariani, A., and Zummo, G., The Prediction of the Critical Heat Flux in Water-Subcooled Flow Boiling, International Journal of Heat and Mass Transfer, vol. 38, pp. 1111–1119, 1995.
  • Payan-Rodriguez, L., Gallegos-Munoz, A., Porras-Loaiza, G., and Picon-Nunez, M., Critical Heat Flux Prediction for Water Boiling in Vertical Tubes of a Steam Generator, International Journal of Thermal Sciences, vol. 44, no. 2, pp. 179–188, 2005.
  • Galloway, J., and Mudawar, I., CHF Mechanism in Flow Boiling From a Short Heated Wall—I. Examination of Near-Wall Conditions With the Aid of Photomicrography and High-Speed Video Imaging, International Journal of Heat and Mass Transfer, vol. 36, pp. 2511–2526, 1993.
  • Kutateladze, S., Heat Transfer in Condensation and Boiling, 2nd ed., State Scientific and Technical Publishers of Literature on Machinery, Moscow, USSR, 1952.
  • Zuber, N., Hydrodynamic Aspects of Boiling Heat Transfer, Ph.D. Thesis, University of California, Los Angeles, CA, June 1959.
  • Tong, L. S., Boiling Heat Transfer and Two-Phase Flow, John Wiley & Sons, New York, NY, 1965.
  • Levy, S., Forced Convection Subcooled Boiling—Prediction of Vapor Volumetric Fraction, International Journal of Heat and Mass Transfer, vol. 10, no. 7, pp. 951–965, 1967.
  • Lee, S., and Durst, F., On the Motions of Particles in Turbulent Flows, vol. 2, Karman Institute for Fluid Dynamics Meas. and Predictions of Complex Turbulent Flows, Sint-Genesius-Rode, Belgium, 1980.
  • Tong, L., Prediction of Departure From Nucleate Boiling for an Axially Non-Uniform Heat Flux Distribution, Journal of Nuclear Energy, vol. 21, no. 3, pp. 241–248, 1967.
  • Bertoletti, S., Gaspari, G., Lobardi, C., Peterlongo, G., and Tacconi, F., A Generalized Correlation For Predicting the Heat Transfer Crisis with Steam–Water Mixtures, Energia Nucleare, vol. 11, no. 10, pp. 571–572, 1964.
  • Yang, J., and Weisman, J., A Phenomenological Model of Subcooled Flow Boiling in the Detached Bubble Region, International Journal of Multiphase Flow, vol. 17, no. 1, pp. 77–94, 1991.
  • Weisman, J., and Illeslamlou, S., Phenomenological Model for Prediction of Critical Heat Flux Under Highly Subcooled Conditions, Fusion Technology, vol. 13, no. 4, pp. 654–659, 1988.
  • Chang, S. H., and Lee, K. W., A Critical Heat Flux Model Based on Mass, Energy, and Momentum Balance for Upflow Boiling at Low Qualities, Nuclear Engineering and Design, vol. 113, no. 1, pp. 35–50, 1989.
  • Saha, P., and Zuber, N., Point of Net Vapor Generation and Vapor Void Fraction in Subcooled Boiling, Heat Transfer, vol. 4, pp. 175–179, 1974.
  • Lee, C. H., and Mudawar, I., A Mechanistic Critical Heat Flux Model for Subcooled Flow Boiling Based on Local Bulk Flow Conditions, International Journal of Multiphase Flow, vol. 14, pp. 711–728, 1988.
  • Katto, Y., A Prediction Model of Subcooled Water Flow Boiling CHF for Pressure in the Range 0.1–20 MPa, International Journal of Heat and Mass Transfer, vol. 35, no. 5, pp. 1115–1123, 1992.
  • Harmathy, T. Z., Velocity of Large Drops and Bubbles in Media of Infinite or Restricted Extent, AIChE Journal, vol. 6, no. 2, pp. 281–288, 1960.
  • Staub, F. W., The Void Fraction in Subcooled Boiling—Prediction of the Initial Point of Net Vapor Generation, Journal of Heat Transfer, vol. 90, no. 1, pp. 151–157, 1968.
  • Celata, G., Cumo, M., Katto, Y., and Mariani, A., Prediction of the Critical Heat Flux in Water Subcooled Flow Boiling Uusing a New Mechanistic Approach, International Journal of Heat and Mass Transfer, vol. 42, no. 8, pp. 1457–1466, 1999.
  • Liu, W., Nariai, H., and Inasaka, F., Prediction of Critical Heat Flux for Subcooled Flow Boiling, International Journal of Heat and Mass Transfer, vol. 43, no. 18, pp. 3371–3390, 2000.
  • Liu, W. X., Tian, W. X., Wu, Y. W., Su, G. H., Qiu, S. Z., Yan, X., Huang, Y. P., and Du, D. X., An Improved Mechanistic Critical Heat Flux Model and Its Application to Motion Conditions, Progress in Nuclear Energy, vol. 61, pp. 88–101, 2012.
  • Hewitt, G. F., Measurement of Two Phase Flow Parameters, Academic Press, New York, NY, 1978.
  • Boyer, C., Duquenne, A.-M., and Wild, G., Measuring Techniques in Gas–Liquid and Gas–Liquid–Solid Reactors, Chemical Engineering Science, vol. 57, pp. 3185–3215, 2002.
  • Lehner, M., Mewes, D., Dinglreiter, U., and Tauscher, R., Applied Optical Measurements, Springer, Berlin, Germany, 1999.
  • Mayinger, F., and Feldmann, O., Optical Measurements—Techniques and Applications, Springer, Berlin/Heidelberg, Germany, 2001.
  • Celata, G. P., Cumo, M., Gallo, D., Mariani, A., and Zummo, G., A Photographic Study of Subcooled Flow Boiling Burnout at High Heat Flux and Velocity, International Journal of Heat and Mass Transfer, vol. 50, pp. 283–291, 2007.
  • Sturgis, J. C., and Mudawar, I., Critical Heat Flux in a Long, Rectangular Channel Subjected to One-Sided Heating—I. Flow Visualization, International Journal of Heat and Mass Transfer, vol. 42, pp. 1835–1847, 1999.
  • Zhang, H., Mudawar, I., and Hasan, M. M., Photographic Study of High-Flux Subcooled Flow Boiling and Critical Heat Flux, International Communications in Heat and Mass Transfer, vol. 34, no. 6, pp. 653–660, 2007.
  • Kharangate, C. R., Mudawar, I., and Hasan, M. M., Photographic Study and Modeling of Critical Heat Flux in Horizontal Flow Boiling With Inlet Vapor Void, International Journal of Heat and Mass Transfer, vol. 55, issues 15-16, pp. 4154–4168, 2012.
  • Bloch, G., Kuczaty, J., and Sattelmayer, T., Application of High-Speed Digital Holographic Interferometry for the Analysis of Temperature Distributions and Velocity Fields in Subcooled Flow Boiling, Experiments in Fluids, vol. 55, no. 2, pp. 1–12, 2014.
  • Schnars, U., and Jüptner, W., Digital Holography, Springer, Berlin/Heidelberg, Germany, 2005.
  • Mayinger, F., Heat Transfer at the Phase Interface of Bubbles Collapsing in Subcooled Liquids and During Subcooled Boiling, Heat and Mass Transfer, vol. 42, pp. 869–874, 2006.
  • Lucic, A., and Mayinger, F., Transport Phenomena in Subcooled Flow Boiling, Heat and Mass Transfer, vol. 46, pp. 1159–1166, 2010.
  • Davies, T. P., Schlieren Photography—Short Bibliography and Review, Optics and Laser Technology, vol. 13, issue 1, pp. 37–42, 1981.
  • Desse, J. M., and Deron, R., Shadow, Schlieren and Color Interferometry, Onera Journal AerospaceLab, issue 1, pp. 1–10, 2009.
  • Hargather, M. J., Lawson, M. J., Settles, G. S., and Weinstein, L. M., Seedless Velocimetry Measurements by Schlieren Image Velocimetry, AIAA Journal, vol. 49, no. 3, pp. 611–620, 2011.
  • Jonassen, D. R., Settles, G. S., and Tronosky, M. D., Schlieren “PIV” for Turbulent Flows, Optics and Lasers in Engineering, vol. 44, no. 3-4, pp. 190–207, 2006.
  • Raffel, M., Willert, C., and Kompenhans, J., Particle Image Velocimetry—A Practical Guide, Springer, Berlin/Heidelberg, Germany, 1998.
  • Prasad, A. K., Particle Image Velocimetry, Current Science, vol. 79, no. 1, pp. 51–60, 2000.
  • Bloch, G., Loth, J., Bruder, M., and Sattelmayer, T., Effects of Turbulence and Longitudinal Vortices on Vapor Distribution and Heat Fluxes in Subcooled Flow Boiling, Proceedings of ECI 8th Boiling and Condensation, Lausanne, Switzerland, 2012.
  • Chaouki, J., Larachi, F., and Dudukovic, M. P., Noninvasive Tomographic and Velocimetric Monitoring of Multiphase Flows, Industrial and Engineering Chemistry Research, vol. 36, pp. 4476–4503, 1997.
  • Mann, R., Dickin, F., Wang, M., Dyakowski, T., Williams, R., Edwards, R., Forrest, A., and Holden, P., Application of Electrical Resistance Tomography to Interrogate Mixing Processes at Plant Scale, Chemical Engineering Science, vol. 52, no. 13, pp. 2087–2097, 1997.
  • Sodtke, C., Kern, J., Schweizer, N., and Stephan, P., High Resolution Measurements of Wall Temperature Distribution Underneath a Single Vapour Bubble Under Low Gravity Conditions, International Journal of Heat and Mass Transfer, vol. 49, issues 5–6, pp. 1100–1106, 2006.
  • Piasecka, M., Maciejewska, B., and Zietala, K., Research on Flow Boiling in Minichannels with Enhanced Heating Walls Using Liquid Crystal Thermography and Infrared Thermography, Proceedings of the 9th International Conference on Boiling and Condensation Heat Transfer, Boulder, CO, April 26-30, 2015.
  • Megahed, A., Local Flow Boiling Heat Transfer Characteristics in Silicon Microchannel Heat Sinks Using Liquid Crystal Thermography, International Journal of Multiphase Flow, vol. 39, pp. 55–65, 2012.
  • Hollingsworth, D., Liquid Crystal Imaging of Flow Boiling in Minichannels, ASME 2004 2nd International Conference on Microchannels and Minichannels, no. ICMM2004-2320, pp. 57–66, Rochester, NY, 2004.
  • Kenning, D., Kono, T., and Wienecke, M., Investigation of Boiling Heat Transfer by Liquid Crystal Thermography, Experimental Thermal and Fluid Science, vol. 25, no. 5, pp. 219–229, 2001.
  • Gerardi, C., Buongiorno, J., wen Hu, L., and McKrell, T., Study of Bubble Growth in Water Pool Boiling Through Synchronized Infrared Thermometry and High-Speed Video, International Journal of Heat and Mass Transfer, vol. 53, pp. 4185–4192, 2010.
  • Visentini, R., Colin, C., and Ruyer, P., Experimental Investigation of Heat Transfer in Transient Boiling, Experimental Thermal and Fluid Science, vol. 55, pp. 95–105, 2014.
  • Hassan, Y., Estrada-Perez, C., and Yoo, J. S., Measurement of Subcooled Flow Boiling Using Particle Tracking Velocimetry and Infrared Thermographic Technique, Nuclear Engineering and Design, vol. 268, pp. 185–190, 2014.
  • Krebs, D., Narayanan, V., Liburdy, J., and Pence, D., Local Wall Temperature Measurements in Microchannel Flow Boiling Using Infrared Thermography, ASME 2008 2nd International Conference on Energy Sustainability collocated with the Heat Transfer, Fluids Engineering, and 3rd Energy Nanotechnology Conference, Jacksonville, FL, USA, 2008.
  • Prasser, H.-M., Böttger, A., and Zschau, J., A New Electrode-Mesh Tomograph for Gas-liquid Flows, Flow Measurement and Instrumentation, vol. 9, pp. 111–119, 1998.
  • Da Silva, M., Schleicher, E., and Hampel, U., Capacitance Wire-Mesh Sensor for Fast Measurement of Phase Fraction Distributions, Measurement Science and Technology, vol. 18, pp. 2245–2251, 2007.
  • Sharaf, S., Da Silva, M., Hampel, U., Zippe, C., Beyer, M., and Azzopardi, B., Comparison Between Wire Mesh Sensor and Gamma Densitometry Void Measurement in Two-Phase Flows, Measurement Science and Technology, vol. 22, pp. 1–13, 2011.
  • Prasser, H.-M., Scholz, D., and Zippe, C., Bubble Size Measurement Using Wire-Mesh Sensors, Flow Measurement and Instrumentation, vol. 12, pp. 299–312, 2001.
  • Auracher, H., and Buchholz, M., Experiments on the Fundamental Mechanisms of Boiling Heat Transfer, Journal of the Brazilian Society of Mechanical Science & Engineering, vol. 27, pp. 1–22, 2005.
  • Buchholz, M., Auracher, H., Lüttich, T., and Marquardt, W., A Study of Local Heat Transfer Mechanisms Along the Entire Boiling Curve by Means of Microsensors, International Journal of Thermal Sciences, vol. 45, pp. 269–283, 2006.
  • Buchholz, M., Lüttich, T., Auracher, H., and Marquardt, W., Experimental Investigation of Local Processes in Pool Boiling Along the Entire Boiling Curve, International Journal of Heat and Fluid Flow, vol. 255, pp. 243–261, 2004.
  • Lüttich, T., Marquardt, W., Buchholz, M., and Auracher, H., Towards a Unifying Heat Transfer Correlation for the Entire Boiling Curve, International Journal of Thermal Sciences, vol. 43, pp. 1125–1139, 2004.
  • Lüttich, T., Marquardt, W., Buchholz, M., and Auracher, H., Identifcation of Unifying Heat Transfer Mechanisms Along the Entire Boiling Curve, International Journal of Thermal Sciences 45, vol. 45, pp. 284–298, 2006.
  • Cartellier, A., Optical Probes for Local Void Fraction Measurements: Characterization of Performance, Review of Scientific Instruments, vol. 61, pp. 874–886, 1990.
  • Cartellier, A., Simultaneous Void Fraction Measurement, Bubble Velocity, and Size Estimate Using a Single Optical Probe in Gas- Liquid Two- Phase Flows, Review of Scientific Instruments, vol. 63, pp. 5442–5453, 1992.
  • Cartellier, A., Measurement of Gas Phase Characteristics Using New Monofiber Optical Probes and Real-Time Signal Processing, Nuclear Engineering and Design, vol. 184, pp. 393–408, 1998.
  • Cartellier, A., Optical Probes for Multiphase Flow Characterization: Some Recent Improvements, Chemical Engineering and Technology, vol. 24, pp. 535–538, 2001.
  • Cartellier, A., and Achard, J., Local Phase Detection Probes in Fluid/Fluid Two- Phase Flows, Review of Scientific Instruments, vol. 62, pp. 279–303, 1991.
  • Cartellier, A., and Barrau, E., Monofiber Optical Probes for Gas Detection and Gas Velocity Measurements: Conical Probes, International Journal of Multiphase Flow, vol. 24, pp. 1265–1294, 1998.
  • Hong, M., Cartellier, A., and Hopfinger, E. J., Characterization of Phase Detection Optical Probes for the Measurement of the Dispersed Phase Parameters in Sprays, International Journal of Multiphase Flow, vol. 30, pp. 615–648, 2004.
  • Mena, P. C., Rocha, F. A., Teixeira, J. A., Sechet, P., and Cartellier, A., Measurement of Gas Phase Characteristics Using a Monofibre Optical Probe in a Three-Phase Flow, Chemical Engineering Science, vol. 63, pp. 4100–4115, 2008.
  • Vejrazka, J., Vecer, M., Orvalho, S., Sechet, P., Ruzicka, M. C., and Cartellier, A., Measurement Accuracy of a Mono-Fiber Optical Probe in a Bubbly Flow, International Journal of Multiphase Flow, vol. 36, pp. 533–548, 2010.
  • Bloch, G., Elfner, J., Finke, K., and Sattelmayer, T., Setup and Fabrication of Cost Effective, Robust Fiber Optical Needle Probes for Application in Multiphase Flows, Lasermethoden in der Strömungsmesstechnik, München, Germany, 2013.
  • Bloch, G., and Sattelmayer, T., Validation of Mechanistic CHF Models Using Optical Measuring Techniques, Kerntechnik, vol. 1, pp. 57–59, 2013.
  • Lim, H.-J., Chang, K.-A., Su, C. B., and Chen, C.-Y., Bubble Velocity, Diameter, and Void Fraction Measurements in a Multiphase Flow Using Fiber Optic Reflectometer, Review of Scientific Instruments, vol. 79, pp. 1–11, 2008.
  • Schleicher, E., Jose da Silva, M., and Hampel, U., Enhanced Local Void and Temperature Measurements for Highly Transient Multiphase Flows, IEEE Transactions on Instrumentation and Measurement, vol. 57, pp. 401–405, 2008.
  • Manera, A., Ozar, B., Paranjape, S., Ishii, M., and Prasser, H.-M., Comparison Between Wire-Mesh Sensors and Conductive Needle-Probes for Measurements of Two-Phase Flow Parameters, Nuclear Engineering and Design, vol. 239, pp. 1718–1724, 2009.
  • Utiger, M., Guy, C., Stuber, F., Duquenne, A.-M., and Delmas, H., Local Measurements for the Study of External Loop Airlift Hydrodynamics, Canadian Journal of Chemical Engineering, vol. 77, no. 2, pp. 375–382, 1999.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.