Particulate Fouling and Challenges of Metal Foam Heat Exchangers

References

• Han, X. H., Wang, Q., Park, Y.-G., T'Joen, C., Sommers, A., and Jacobi, A., A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks, Heat Transfer Engineering, vol. 33, no. 12, pp. 991–1009, 2012.
   Web of Science ®Google Scholar
• T'Joen, C., De Jaeger, P., Huisseune, H., Van Herzeele, S., Vorst, N., and De Paepe, M., Thermo-Hydraulic Study of a Single Row Heat Exchanger Consisting of Metal Foam Covered Round Tubes, International Journal of Heat and Mass Transfer, vol. 53, no. 15–16, pp. 3262–3274, 2010.
   Web of Science ®Google Scholar
• Banhart, J., Manufacture, Characterisation and Application of Cellular Metals and Metal Foams, Progress in Material Science, vol. 46, no. 6, pp. 559–632, 2001.
   Web of Science ®Google Scholar
• Bhattacharya, A., Calmidi, V. V., and Mahajan, R. L., Thermophysical Properties of High Porosity Metal Foams, International Journal of Heat and Mass Transfer, vol. 45, pp. 1017–1031, 2002.
   Web of Science ®Google Scholar
• Odabaee, M., De Paepe, M., De Jaeger, P., T'Joen, C., and Hooman, K., Particle Deposition Effects on Heat Transfer From a Metal Foam-Wrapped Tube Bundle, International Journal of Numerical Methods for Heat & Fluid Flow, vol. 23, no. 1, pp. 74–87, 2013.
   Web of Science ®Google Scholar
• Contento, G., Oliviero, M., Bianco, N., and Naso, V., The prediction of Radiation Heat Transfer in Open Cell Metal Foams by a Model Based on the Lord Kelvin Representation, International Journal of Heat and Mass Transfer, vol. 76, pp. 499–508, 2014.
   Web of Science ®Google Scholar
• Dukhan, N., Correlations for the Pressure Drop for Flow Through Metal Foam, Experiments in Fluids, vol. 41, pp. 665–672, 2006.
   Web of Science ®Google Scholar
• Odabaee, M., Mancin, S., and Hooman, K., Metal Foam Heat Exchangers for Thermal Management of Fuel Cell Systems–An Experimental Study, Experimental Thermal and Fluid Science, vol. 51, pp. 214–219, 2013.
   Web of Science ®Google Scholar
• Ashtiani Abdi, I., Hooman, K., and Khashehchi, M. A., Comparison Between the Separated Flow Structures Near the Wake of a Bare and a Foam-Covered Circular Cylinder, Journal of Fluids Engineering, vol. 136, no. 12, p. 121203-1–121203-8, 2014.
   Web of Science ®Google Scholar
• Sauret, E., Ashtiani Abdi, I., and Hooman, K., Fouling of Waste Heat Recovery: Numerical and Experimental Results, 19th Australasian Fluid Mechanics Conference, Melbourne, Australia, December 2014.
   Google Scholar
• Calmidi, V. V., Transport Phenomena in High Porosity Fibrous Metal Foams, Thesis, University of Colorado, Boulder, CO, 1998.
   Google Scholar
• Paek, J., Kang, B., Kim, S., and Hyun, J., Effective Thermal Conductivity and Permeability of Aluminum Foam Materials, International Journal of Thermophysics, vol. 21, no. 2, pp. 453–464, 2000.
   Web of Science ®Google Scholar
• Poulikakos, D., and Boomsma, K., On the Effective Thermal Conductivity of a Three-Dimensionally Structured Fluid-Saturated Metal Foam, International Journal of Heat and Mass Transfer, vol. 44, no. 4, pp. 827–836, 2001.
   Web of Science ®Google Scholar
• Mahjoob, S., and Vafai, K., A Synthesis of Fluid and Thermal Transport Models for Metal Foam Heat Exchangers, International Journal of Heat and Mass Transfer, vol. 51, no. 15–16, pp. 3701–3711, 2008.
   Web of Science ®Google Scholar
• Muley, A., Kiser, C., Sundén, B., and Shah, R. K., Foam Heat Exchangers: A Technology Assessment, Heat Transfer Engineering, vol. 33, no. 1, pp. 42–51, 2012.
   Web of Science ®Google Scholar
• Ghosh, I., How Good Is Open-Cell Metal Foam as Heat Transfer Surface?, Journal of Heat Transfer, vol. 131, no. 10, p. 101004, 2009.
   Web of Science ®Google Scholar
• Hooman, K., Tamayol, A., and Malayeri, M. R., Impact of Particulate Deposition on the Thermohydraulic Performance of Metal Foam Heat Exchangers: A Simplified Theoretical Model, Journal of Heat Transfer, vol. 134, no. 9, p. 092601, 2012.
   Web of Science ®Google Scholar
• Chumpia, A., and Hooman, K., Performance Evaluation of Single Tubular Aluminium Foam Heat Exchangers, Applied Thermal Engineering, vol. 66, pp. 266–273, 2014.
   Web of Science ®Google Scholar
• De Schampheleire, S., De Jaeger, P., Huisseune, H., Ameel, B., T'Joen, C., De Kerpel, K., and De Paepe, M., Thermal hydraulic performance of 10 PPI aluminium foam as alternative for louvered fins in an HVAC heat exchanger, Applied Thermal Engineering, vol. 51, pp. 371–382, 2013.
   Web of Science ®Google Scholar
• Ackermann, H. D., Experimental Investigation of Fouling in various Exhaust Gas Recirculation Coolers, ITW Thesis, University of Stuttgart, Stuttgart, Germany, 2012.
   Google Scholar
• Kahle, J., Experimental Investigation of Deposit Formation in Foam Structured EGR Coolers, ITW Thesis, University of Stuttgart, Stuttgart, Germany, 2012.
   Google Scholar
• Chumpia, A., and Hooman, K., Quantification of Contact Resistance of Metal Foam Heat Exchangers for Improved Air-cooled Condensers in Geothermal Power Application, 18th Australasian Fluid Mechanics Conference, Launceston, Australia, December 2012.
   Google Scholar
• Mirsadraee, A., and Malayeri, M. R., Prediction of Fouling in EGR coolers With Radial Basis Function Neural Networks, Proceedings of International Conference on Heat Exchanger Fouling and Cleaning, Budapest, Hungary, June 2013.
   Google Scholar
• Zheng, M., Reader, G. T., and Hawley, J. G., Diesel Engine Exhaust Gas Recirculation—A Review on Advanced and Novel Concepts, Energy Conversion Management, vol. 45, no. 6, pp. 883–900, 2004.
   Web of Science ®Google Scholar
• Wei, H., Zhu, T., Shu, G., Tan, L., and Wang, Y., Gasoline Engine Exhaust Gas Recirculation—A Review, Applied Energy, vol. 99, pp. 534–544, 2012.
   Web of Science ®Google Scholar
• Agarwal, D., Kumar Singh, S., and Kumar Agarwal, A., Effect of Exhaust Gas Recirculation (EGR) on Performance, Emissions, Deposits, and Durability of a Constant Speed Compression Ignition Engine, Applied Energy, vol. 88, pp. 2900–2907, 2011.
   Web of Science ®Google Scholar
• Bravo, Y., Larrosa, C., Arnal, C., Alfè, M., and Bilbao, R., Effects of Soot Deposition on EGR Coolers: Dependency on Heat Exchanger Technology and Engine Conditions, Proceedings of International Conference on Heat Exchanger Fouling and Cleaning, Budapest, Hungary, June 2013.
   Google Scholar
• Abarham, M., Chafekar, T., Hoard, J. W., Salvi, A., Styles, D. J., Scott Sluder, C., and Assanis, D., In-Situ Visualization of Exhaust Soot Particle Deposition and Removal in Channel Flows, Chemical Engineering Science, vol. 87, pp. 359–370, 2013.
   Web of Science ®Google Scholar
• Storey, J. M. E., Sluder, C. S., Lance, M. J., Styles, D. J., and Simko, S. J., Exhaust Gas Recirculation Cooler Fouling in Diesel Applications: Fundamental Studies of Deposit Properties and Microstructure, Heat Transfer Engineering, vol. 34, no. 8–9, pp. 655–664, 2013.
   Web of Science ®Google Scholar
• Abd-Elhady, M. S., Malayeri, M. R., and Müller-Steinhagen, H., Fouling Problems in Exhaust Gas Recirculation Coolers in the Automotive Industry, Heat Transfer Engineering, vol. 32, no. 3–4, pp. 248–257, 2011.
   Web of Science ®Google Scholar
• Lee, J. and Min, K., A Study of the Fouling Characteristics of EGR Coolers in Diesel Engines, Journal of Mechanical Science and Technology, vol. 28, no. 8, pp. 3395–3401, 2014.
   Web of Science ®Google Scholar
• Warey, A., Balestrino, S., Szymkowicz, P., and Malayeri, M. R., A One-Dimensional Model for Particulate Deposition and Hydrocarbon Condensation in Exhaust Gas Recirculation Coolers, Aerosol Science and Technology, vol. 46, no. 2, pp. 198–213, 2012.
   Web of Science ®Google Scholar
• Warey, A., Bika, A. S., Long, D., Balestrino, S., and Szymkowicz, P. Influence of Water Vapor Condensation on Exhaust Gas Recirculation Cooler Fouling, International Journal of Heat and Mass Transfer, vol. 65, pp. 807–816, 2013.
   Web of Science ®Google Scholar
• Abd-Elhady, M. S., and Malayeri, M. R., Asymptotic Characteristics of Particulate Deposit Formation in Exhaust Gas Recirculation (EGR) Coolers, Applied Therm. Engineering, vol. 60, pp. 96–104, 2013.
   Web of Science ®Google Scholar
• Abd-Elhady, M. S., Rindt, C. C. M., Wijers, J.G., van Steenhoven, A. A., Bramer, E. A., and van der Meer, T. H., Minimum Gas Speed in Heat Exchangers to Avoid Particulate Fouling, International Journal of Heat and Mass Transfer, vol. 47, no. 17–18, pp. 3943–3955, 2004.
   Web of Science ®Google Scholar
• Santhyanarayanarao Subbarao, K. K., Rindt, C. C. M., and van Steenhoven, A. A., Growth Rates of dry Particulate Fouling Under Variable Process, Proceedings of International Conference on Heat Exchanger Fouling and Cleaning, Crete, Greece, June 2011.
   Google Scholar
• Bott, T. R., Fouling Notebook, Institution of Chemical Engineers, England, 1990.
   Google Scholar
• Hong, K. S., Lee, K. S., Song, S., Chun, K. M., Chung, D., and Min, S., Parametric Study on Particle Size and SOF Effects on EGR Cooler Fouling, Atmospheric Environment, vol. 45, pp. 5677–5683, 2011.
   Web of Science ®Google Scholar
• Lance, M. J., Sluder, C. S., Wang, H. and Storey, J. M. E., Direct Measurement of EGR Cooler Deposit Thermal Properties for Improved Understanding of Cooler Fouling, SAE International, 2009. doi:10.4271/2009-01-1461
   Google Scholar
• Sauret, E., and Hooman, K., Particle Size Distribution Effects on Preferential Deposition Areas in Metal Foam Wrapped Tube Bundle, International Journal of Heat and Mass Transfer, vol. 79, pp. 905–915, 2014.
   Web of Science ®Google Scholar
• Sauret, E., Saha, S. C., and Gu, Y., Numerical Simulations of Particle Deposition in Metal Foam Heat Exchangers, International Journal of Computational Materials Science and Engineering, vol. 2, no. 3&4, p. 1350016, 2013.
   Google Scholar
• Beavers, G. S. and Joseph, D. D., Boundary Conditions at a Naturally Permeable Wall, Journal of Fluid Mechanics, vol. 30, no. 1. p. 197, 1967.
   Web of Science ®Google Scholar
• Sauret, E., Hooman, K. and Saha, S. C., CFD Simulations of Flow and Heat Transfer Through the Porous Interface of a Metal Foam Heat Exchanger, Proceeding of the ASME 2014 Power Conference, Baltimore, Maryland, USA, July 2014.
   Google Scholar
• Ashtiani Abdi, I., Khashehci, M., and Hooman, K., A Comparison Between the Separated Flow Structured Near the Wake of a Bare and a Foam-Covered Circular Cylinder, Proceeding of the ASME 2013 Fluids Engineering Summer Meeting (FEDSM2013), Incline Village, Nevada, USA, July 2013.
   Google Scholar
• Hooman, K., Thermohydraulics of Porous Heat Exchangers: Full or Partial Blockage?, Proceedings of the 5th International Conference on Porous Media and its Applications in Science and Engineering (ICPM5), Kona, HI, June 2014.
   Google Scholar
• Dukhan, N., Metal Foams; Fundamentals and Applications, DEStech Pubs., Inc., Lancaster, PA, USA, 2013.
   Google Scholar
• Lister, V. Y., Davidson, J. F., and Wilson, D. I., When Is Fouling Too Fast to Measure Thermally?, Proceeding of International Conference on Heat Exchanger Fouling and Cleaning, Budapest, Hungary, June 2013.
   Google Scholar
• Abd-Elhady, M. S., Clevers, S. H., Adriaans, T. N. G., Rindt, C. C. M., Wijers, J. G., and van Steenhoven, A. A., Influence of Sintering on the Growth Rate of Particulate Fouling Layers, International Journal of Heat and Mass Transfer, vol. 50, no. 1–2, pp. 196–207, 2007.
   Web of Science ®Google Scholar
• Salvi, A., In-Situ Determination of the Thermo-Physical Properties of Nano-Particulate Layers Developed in Engine Exhaust Gas Heat Exchangers and Opportunities for Heat Exchanger Effectiveness Recovery, Ph.D. Thesis, University of Michigan, Ann Arbor, MI, 2013.
   Google Scholar
• Abd-Elhady, M. S., Zornek, T., Malayeri, M. R., Balestrino, S., Szymkowicz, P. G., and Müller-Steinhagen, H., Influence of Gas Velocity on Particulate Fouling of Exhaust Gas Recirculation Coolers, International Journal of Heat and Mass Transfer, vol. 54, no. 4, pp. 838–846, 2011.
   Web of Science ®Google Scholar
• Jang, S., Park, S., Choi, K., and Kim, H., Experimental Investigation of the Influences of Shape and Surface Area on the EGR Cooler Efficiency, Heat and Mass Transfer, vol. 47, no. 6, pp. 621–628, 2010.
   Web of Science ®Google Scholar
• Kim, H.-M., Lee, D.-H., Park, S.-K., Choi, K.-S., and Wang, H.-M., An Experimental Study on Heat Exchange Effectiveness in the Diesel Engine EGR Coolers, Journal of Mechanical Science and Technology, vol. 22, no. 2, pp. 361–366, 2008.
   Web of Science ®Google Scholar
• Park, S. K., Lee, J., and Kim, H. M., Experimental study on the spiral and oval spiral EGR cooler efficiencies in a diesel engine, Heat and Mass Transfer, vol. 50, no. 12, pp. 1783–1789, 2014.
   Web of Science ®Google Scholar
• Park, S., Choi, K., Kim, H., and Lee, K., Influence of PM Fouling on Effectiveness of Heat Exchanges in a Diesel Engine With Fin-Type EGR Coolers of Different Sizes, Heat and Mass Transfer, vol. 46, pp. 1221–1227, 2010.
   Web of Science ®Google Scholar
• Jang, S. H., Hwang, S. J., Park, S. K., Choi, K. S. and Kim, H. M., Effects of PM Fouling on the Heat Exchange Effectiveness of Wave Fin Type EGR Cooler for Diesel Engine Use, Heat and Mass Transfer, vol. 48, no. 6, pp. 1081–1087, 2011.
   Web of Science ®Google Scholar
• Mohammadi, K. and Malayeri, M. R., CFD Study of Turbulence Induced Structures in EGR Coolers, Proceedings of International Conference on Heat Exchanger Fouling and Cleaning, Budapest, Hungary, June 2013.
   Google Scholar
• Hong, K. S., Park, J. S., and Lee, K. S., Experimental Evaluation of SOF Effects on EGR Cooler Fouling Under Various Flow Conditions, International Journal of Automotive Technology, vol. 12, no. 6, pp. 813–821, 2011.
   Web of Science ®Google Scholar
• Hatami, M., Ganji, D. D., and Gorji-Bandpy, M., A Review of Different Heat Exchangers Designs for Increasing the Diesel Exhaust Waste Heat Recovery, Renewable & Sustainable Energy Reviews, vol. 37, pp. 168–181, 2014.
   Web of Science ®Google Scholar
• Miguel, A. F., Experimental Study on Nanofluid Flow in a Porous Cylinder: Viscosity, Permeability and Inertial Factor, Trans. Technical Publications, vol. 362, pp. 47–57, 2015.
   Google Scholar
• Xu, Z. G,. and Zhao, C. Y., Influences of Nanoparticles on Pool Boiling Heat Transfer In Porous Metals, Applied Thermal Engineering, vol. 65, pp. 34–41, 2014.
   Web of Science ®Google Scholar
• Dukhan, N., and Patel, K., Effect of Sample's Length on Flow Properties of Open-Cell Metal Foam and Pressure-Drop Correlations, Journal of Porous Material, vol. 18, pp. 655–665, 2011.
   Web of Science ®Google Scholar
• Hooman, K., Tamayol, A., Dahari, M., Safaei, M. R., Togun, H., and Sadri, R., A Theoretical Model to Predict Gas Permeability for Slip Flow Through a Porous Medium, Applied Thermal Engineering, vol. 70, no. 1, pp. 71–76, 2014.
   Web of Science ®Google Scholar
• Zheng, Q., Yu, B., Duan, Y., and Fang, Q., A Fractal Model for Gas Slippage Factor in Porous Media in the Slip Flow Regime, Chemical Engineering Science, vol. 87, pp. 209–215, 2013.
   Web of Science ®Google Scholar
• Xu, H. J., Zhao, C. Y., and Xu, Z. G., Analytical Considerations of Slip Flow and Heat Transfer Through Microfoams in Mini/Microchannels With Asymmetric Wall Heat Fluxes, Applied Thermal Engineering, vol. 93, pp. 15–26, 2016.
   Web of Science ®Google Scholar
• Müller-Steinhagen, H., Malayeri, M. R., and Watkinson, A. P., Heat Exchanger Fouling: Mitigation and Cleaning Strategies, Heat Transfer Engineering, vol. 32, pp. 189–196, 2011.
   Web of Science ®Google Scholar