Methods for Calculating Shear Stress at the Wall for Single-Phase Flow in Tubular, Annular, Plate, and Shell-Side Heat Exchanger Geometries

References

• Joshi, H. M., Shilpi, N. B., and Agarwal, A., Relate Crude Oil Fouling Research to Field Fouling Observations, Heat Exchanger Fouling and Cleaning—2009 Conference, Schladming, Austria, June 14–19, 2009.
   Google Scholar
• Watkinson, A. P., Deposition From Crude Oils in Heat Exchangers, Heat Transfer Engineering, vol. 28, no. 3, pp. 177–184, 2007.
   Web of Science ®Google Scholar
• Watkinson, A. P., and Li, Y.-H., Fouling Characteristics of a Heavy Vacuum Gas Oil in the Presence of Dissolved Oxygen, Heat Exchanger Fouling and Cleaning—2009 Conference, Schladming, Austria, 14–19 June 2009.
   Google Scholar
• Muller-Steinhagen, H., Reif, F., Epstein, N., and Watkinson, A. P., Influence of Operating Conditions on Particulate Fouling, Canadian Journal of Chemical Engineering, vol. 66, pp. 42–50, 1988.
   Web of Science ®Google Scholar
• Bennett, C. A., A Theory Describing Asphaltene Adhesion Fouling Inside Heat Exchanger Tubes, Heat Transfer Engineering, vol. 33, no. 15, pp. 1246–1250, 2012.
   Web of Science ®Google Scholar
• Bennett, C. A., Kistler, R. S., Nangia, K., Al-Ghawas, W., Al-Hajji, N., and Al-Jemaz, A., Observation of an Isokinetic Temperature and Compensation Effect for High-Temperature Crude Oil Fouling, Heat Transfer Engineering, vol. 30, nos. 10–11, pp. 794–804, 2009.
   Web of Science ®Google Scholar
• Bennett, C. A., A Theory Describing Sedimentation Particulate Fouling Thresholds Inside Heat Exchanger Tubes, Heat Transfer Engineering, vol. 37, no. 5, pp. 468–474, 2016.
   Web of Science ®Google Scholar
• Wilkes, J. O., Fluid Mechanics for Chemical Engineers, 2nd ed., Prentice Hall, New York, NY, 2005.
   Google Scholar
• White, F. M., Viscous Fluid Flow, 2nd ed., McGraw-Hill, New York, NY, 1991.
   Google Scholar
• Fox, R. W., McDonald, A. T., and Pritchard, P. J., Introduction to Fluid Mechanics, 6th ed., John Wiley & Sons, New York, NY, 2004.
   Google Scholar
• Schlichting, H., and Gersten, K., Boundary-Layer Theory, 8th ed., Springer-Verlag, Berlin, Germany, 2003.
   Google Scholar
• Kakac, S., Shah, R. K., and Aung, W., Handbook of Single-Phase Convective Heat Transfer, John Wiley & Sons, New York, NY, 1987.
   Google Scholar
• Bird, R. B., Stewart, W. E., and Lightfoot, E. N., Transport Phenomena, John Wiley & Sons, New York, NY, 1960.
   Google Scholar
• Blevins, R. D., Applied Fluid Dynamics Handbook, Krieger Publishing Company, Malabar, FL, 1984.
   Google Scholar
• Rohwenow, W. M., Hartnett, J. P., and Cho, Y. I., Handbook of Heat Transfer, 3rd ed., McGraw-Hill, New York, 1998.
   Google Scholar
• Taborek, J., Double-Pipe and Multitube Heat Exchangers With Plain and Longitudinal Finned Tubes, Heat Transfer Engineering, vol. 18, no. 2, pp. 34–45, 1997.
   Web of Science ®Google Scholar
• McCabe, W. L., Smith, J. C., and Harriott, P., Unit Operations of Chemical Engineering, 7th ed., McGraw-Hill, New York, 2005.
   Google Scholar
• Duan, Z., Yavanovich, M. M., and Muzychka, Y. S., Pressure Drop for Fully Developed Turbulent Flow in Circular and Noncircular Ducts, Journal of Fluids Engineering, vol. 134, pp. 061201-1–061201-10, 2012.
   Google Scholar
• Churchill, S. W., and Chan, C., Improved Correlating Equations for the Friction Factor for Fully Turbulent Flow in Round Tubes and Between Identical Parallel Plates, Both Smooth and Naturally Rough, Industrial & Engineering Chemistry Research, vol. 33, pp. 2016–2019, 1994.
   Web of Science ®Google Scholar
• Naughton, J. W., and Sheplak, M., Modern Developments in Shear-Stress Measurement, Progress in Aerospace Sciences, vol. 38, pp. 515–570, 2002.
   Web of Science ®Google Scholar
• Lofdahl, L., and Gad-el-Hak, M., MEMS-Based Pressure and Shear Stress Sensors for Turbulent Flows, Measurement Science and Technology, vol. 10, pp. 665–686, 1999.
   Web of Science ®Google Scholar
• Fernholz, H. H., Schober, M., Wagner, P. M., and Warnack, D., New Developments and Applications of Skin-Friction Measuring Techniques, Measurement Science and Technology, vol. 7, pp. 1396–1409, 1996.
   Web of Science ®Google Scholar
• Nowak, M., Wall Shear Stress Measurement in a Turbulent Pipe Flow Using Ultrasound Doppler Velocimetry, Experiments in Fluids, vol. 33, pp. 249–255, 2002.
   Web of Science ®Google Scholar
• Kendall, A., and Koochesfahani, M., A Method for Estimating Wall Friction in Turbulent Wall-Bounded Flows, Exp. Fluids, vol. 44, pp. 773–780, 2008.
   Web of Science ®Google Scholar
• Churchill, S. W., Friction-Factor Equation Spans All Fluid-Flow Regimes, Chemical Engineering, vol. 91, pp. 91–92, 1977.
   Google Scholar
• Kakac, S., Shah, R. K., and Aung, W., Handbook of Single-Phase Convective Heat Transfer, Wiley, New York, NY, 1987.
   Google Scholar
• Kaneda, M., Yu, B., Ozoe, H., and Churchill, S. W., The Characteristics of Turbulent Flow and Convection in Concentric Circular Annuli. Part I: Flow, International Journal of Heat and Mass Transfer, vol. 46, pp. 5045–5057, 2003.
   Web of Science ®Google Scholar
• Rao, P. S. V. K., Sastry, C. V. N, and Sarma, P. K., An Approximate Model for Turbulent Flow in an Annulus, Canadian Journal of Chemical Engineering, vol. 51, pp. 112–113, 1973.
   Web of Science ®Google Scholar
• Boersma, B. J., and Breugem, W. P., Numerical Simulation of Turbulent Flow in Concentric Annuli, Flow, Turbulence and Combustion, vol. 86, pp. 113–127, 2011.
   Web of Science ®Google Scholar
• Knudsen, J. G., and Katz, D. L., Fluid Dynamics and Heat Transfer, McGraw-Hill, New York, NY, 1958.
   Google Scholar
• Rohsenow, W. M., Hartnett, J. P., and Cho, Y. I., Handbook of Heat Transfer, 3rd ed., McGraw-Hill, New York, NY, 1998.
   Google Scholar
• Bennett, C. A., Tubeside and Shellside Shear Stress for Single-Phase Flow, F-17, Heat Transfer Research, Inc., Navasota, TX, 2008.
   Google Scholar
• Knudsen, J. G., and Katz, D. L., Fluid Dynamics and Heat Transfer, McGraw-Hill, New York, NY, 1958.
   Google Scholar
• Rohsenow, W. M., Hartnett, J. P., and Cho, Y. I., Handbook of Heat Transfer, 3rd ed., McGraw-Hill, New York, NY, 1998.
   Google Scholar
• Blevins, R. D., Applied Fluid Dynamics Handbook, Krieger, Malabar, FL, 2003.
   Google Scholar
• Arsenyeva, O., Kapustenko, P., Tovazhnyanskyy, L., and Khavin, G., The Influence of Plate Corrugations Geometry on Plate Heat Exchanger Performance in Specified Process Conditions, Energy, vol. 57, pp. 201–207, 2013.
   Web of Science ®Google Scholar
• Arsenyeva, O., Tovazhnyanskyy, L. L., Kapustenko, P. O., and Demirskiy, O. V., Heat Transfer and Friction Factor in Criss-Cross Flow Channels of Plate-and-Frame Heat Exchangers, Theoretical Foundations of Chemical Engineering, vol. 46, no. 6, pp. 634–641, 2012.
   Web of Science ®Google Scholar
• Arsenyeva, O., Tovazhnyansky, L., Kapustenko, P., and Khavin, G., The Generalized Correlation for Friction Factor in Criss-Cross Flow Channels of Plate Heat Exchangers, Chemical Engineering Transactions, vol. 25, pp. 399–404, 2011.
   Google Scholar
• Li, W., Li, H. X., Li, G. Q, and Yao, S. C., Numerical and Experimental Analysis of Composite Fouling in Corrugated Plate Heat Exchangers, International Journal of Heat and Mass Transfer, vol. 63, pp. 351–360, 2013.
   Web of Science ®Google Scholar
• Stogiannis, I. A., Paras, S. V., Arsenyeva, O. P., and Kapustenko, P. O., CFD Modeling of Hydrodynamics and Heat Transfer in Channels of a PHE, Chemical Engineering Transactions, vol. 35, pp. 1285–1290, 2013.
   Google Scholar
• Loureiro, J. B. R., Sousa, F. B. C. C., Zotin, J. L. Z., and Silva-Freire, A. P., The Distribution of Wall Shear Stress Downstream of a Change in Roughness, International Journal of Heat and Fluid Flow, vol. 31, pp. 785–793, 2010.
   Web of Science ®Google Scholar
• Izumi, r., Yamashita, H., and Oyakawa, K., Fluid Flow and Heat Transfer in Corrugated Wall Channels, Bulletin of the JSME, vol. 26, no. 217, pp. 1146–1153, 1983.
   Google Scholar
• Martin, H., A Theoretical Approach to Predict the Performance of Chevron-Type Plate Heat Exchangers, Chemical Engineering and Processing, vol. 35, pp. 301–310, 1996.
   Web of Science ®Google Scholar
• Martin, H., Economic Optimization of Compact Heat Exchangers, EF Conference on Compact Heat Exchangers and Enhancement Technology for the Process Industries, Banff, Alberta, Canada, July 18–23, 1999.
   Google Scholar
• Rehme, K., The Structure of Turbulent Flow Through a Wall Subchannel of a Rod Bundle, Nuclear Engineering and Design, vol. 45, pp. 311–323, 1978.
   Web of Science ®Google Scholar
• Hooper, J. D., and Rehme, K., Large-Scale Structural Effects in Developed Turbulent Flow Through Closely-Spaced Rod Arrays, J. Fluid Mech., vol. 145, pp. 305–337, 1984.
   Web of Science ®Google Scholar
• Hooper, J. D., and Wood, D. H., Fully Developed Rod Bundle Flow Over a Large Range of Reynolds Number, Nuclear Engineering and Design, vol. 83, pp. 31–46, 1984.
   Web of Science ®Google Scholar
• Kolesnikovas, J. J., Papandin, M. V., Smirnov, V. P., and Cesna, B. A., Parameters of Axial Flow Over a Rod Bundle, Fluid Mechanics—Soviet Research, vol. 14, no. 6, pp. 11–23, 1985.
   Google Scholar
• Mohanty, A. K., and Sahoo, K. M., Laminar Convection in Wall Sub-Channels and Transport Rates for Finite Rod-Bundle Assemblies by Superposition, Nuclear Engineering and Design, vol. 92, pp. 169–180, 1986.
   Web of Science ®Google Scholar
• Renksizbulut, M., and Hadaller, G. I., An Experimental Study of Turbulent Flow Through a Square-Array Rod Bundle, Nuclear Engineering and Design, vol. 91, pp. 41–55, 1986.
   Web of Science ®Google Scholar
• Kaiser, H. G., and Zeggel, W., Turbulent Flows in Complex Rod Bundle Geometries Numerically Predicted by the use of FEM and a Basic Turbulence Model, Nuclear Engineering and Design, vol. 99, pp. 351–363, 1987.
   Web of Science ®Google Scholar
• Wu, S. R., and Rehme, K., An Experimental Investigation on Turbulent Flow Through Symmetric Wall Subchannels of Two Rod Bundles, Nuclear Technology, vol. 89, pp. 103–115, 1990.
   Web of Science ®Google Scholar
• Krauss, T., and Meyer, L., Experimental Investigation of Turbulent Transport of Momentum and Energy in a Heated Rod Bundle, Nuclear Engineering and Design, vol. 180, pp. 185–206, 1998.
   Web of Science ®Google Scholar
• Weisstein, E., Circular Segment, http://mathworld.wolfram.com/CircularSegment.html, July 21, 2009.
   Google Scholar
• Nishimura, T., and Kawamura, Y., Mass Transfer in Tube Banks in the Fully Developed Region, Kagaku Kogaku Ronbunshu, vol. 7, pp. 469–474, 1981.
   Web of Science ®Google Scholar
• Dhaubhadel, M. N., Reddy, J. N., and Telionis, D. P., Penalty Finite-Element Analysis of Coupled Fluid Flow and Heat Transfer for In-Line Bundle of Cylinders in Cross Flow, International Journal of Non-Linear Mechanics, vol. 21, no. 5, pp. 361–373, 1986.
   Web of Science ®Google Scholar
• Toyama, S., Mori, H., and Suzuki, M., Flow Patterns Through Tube Bundles and Particulate Fouling Onto Cylinders, Particulate Science and Technology, vol. 5, pp. 397–408, 1987.
   Google Scholar
• Nishimura, T., Itoh, H., Ohya, K., and Miyashita, H., Experimental Validation of Numerical Analysis of Flow Across Tube Banks for Laminar Flow, Journal of Chemical Engineering of Japan, vol. 24, no. 5, pp. 666–669, 1991.
   Web of Science ®Google Scholar
• Nishimura, T., Itoh, H., and Miyashita, H., The Influence of Tube Layout on Flow and Mass Transfer Characteristics in Tube Banks in the Transitional Flow Regime, International Journal of Heat and Mass Transfer, vol. 36, no. 3, pp. 553–563, 1993.
   Web of Science ®Google Scholar
• Farrell, K. J., CFD Simulations of Single-Phase Turbulent Shellside Flow, S-SS-3-18, Heat Transfer Research, Inc., Navasota, TX, 2008.
   Google Scholar
• Taborek, J., Shell-and-Tube Heat Exchangers: Single-Phase Flow—Input Data and Recommended Practices, in Handbook of Heat Exchanger Design, ed. G. F. Hewitt, Begell House, New York, NY, pp. 3.3.5–3.3.16, 1992.
   Google Scholar
• Tinker, T., Shell Side Characteristics of Shell and Tube Heat Exchangers, in General Discussion on Heat Transfer, Institution of Mechanical Engineers, London, UK, pp. 97–116, 1951.
   Google Scholar
• Bell, K. J., Delaware Method for Shell Side Design, Heat Exchanger Sourcebook, ed. J. W. Palen, Hemisphere, New York, NY, pp. 129–166, 1986.
   Google Scholar
• Palen, J. W., Taborek, J., and Yarden, A., Stream Analysis Method for Prediction of Shellside Heat Transfer and Pressure Drop in Segmentally Baffled Exchangers, S-SS-3-1, Heat Transfer Research, Inc., Navasota, TX, 1967; revised 1977 and 2007.
   Google Scholar
• Gaddis, E. S., Pressure Drop in Crossflow Over Tube Bundles, Chapter LD, VDI Heat Atlas, ed. Verein Deutscher Ingenieure, LD1–LD7, VDI-Verlag Gmbh, Dusseldorf, Germany, 1993.
   Google Scholar
• Farrell, K. J., CFD Study of NTIW Bundles, S-SS-3-14, Heat Transfer Research, Inc., Navasota, TX, 2004.
   Google Scholar
• Gilmour, C. H., No Fooling—No Fouling, Chemical Engineering Progress, vol. 61, no. 7, pp. 49–54, 1965.
   Web of Science ®Google Scholar
• Mukherjee, R., Effectively Design Shell-and-Tube Heat Exchangers, Chemical Engineering Progress, vol. 94, no. 2, pp. 21–37, 1998.
   Web of Science ®Google Scholar
• Saffar-Avval, M., and Damangir, E., A General Correlation for Determining Optimum Baffle Spacing for All Types of Shell and Tube Exchangers, International Journal of Heat and Mass Transfer, vol. 38, no. 13, pp. 2501–2506, 1995.
   Web of Science ®Google Scholar
• Bell, K. J., and Mueller, A. C., Wolverine Engineering Data Book II, http://www.wlv.com/products/databook/databook.pdf, Table 1.1, p. 48, 13 March 2014.
   Google Scholar
• McLaury, B. S., and Shirazi, S. A., An Alternative Method to API RP 14E for Predicting Solids Erosion in Multiphase Flow, Journal of Energy Resources Technology, vol. 122, no. 9, pp. 115–122, 2000.
   Google Scholar
• Salama, M. M., An Alternative to API 14E for Erosional Velocity Limits for Sand-Laden Fluids, Journal of Energy Resources Technology, vol. 122, no. 6, pp. 71–77, 2000.
   Google Scholar
• API Recommended Practice RP 14E: Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems, 5th ed., p. 23, API, Washington, DC, 1991.
   Google Scholar