References
- Heidrich, P., and Krisch, T., Assessment of Waste Heat Recovery Options in Passenger Car Applications by Various Rankine Cycles, Heat Transfer Engineering, vol. 36, no. 14–15, pp. 1321–1331, 2015.
- Jun, Y. D., Lee, K. B., Islam, S. Z., and Ko, S. B., Fouling Reduction Characteristics of a No-Distributor-Fluidized-Bed Heat Exchanger for Flue Gas Heat Recovery, Heat Transfer Engineering, vol. 29, no. 9, pp. 822–829, 2008.
- Rabaria, R., Mahmud, S., Dutta, A., and Biglarbegian, M., Effect of Convection Heat Transfer on Performance of Waste Heat Thermoelectric Generator, Heat Transfer Engineering, vol. 36, no. 17, pp. 1458–1471, 2015.
- Yamashita, J., and Utaka, Y., Improvement in Performance of Secondary Heat Exchanger for Gas Water Heater by Using Narrow Tubes, Heat Transfer Engineering, vol. 36, no. 14–15, 1282–1291, 2015.
- Baskaya, S., Karaaslan, S., Calisir, T., Yilmazoglu, M. Z., and Yilmaz, T. O., Experimental and Numerical Study on Thermoelectric Generator Performance Applied to a Condensing Combi Boiler, Heat Transfer Engineering, vol. 36, no. 14–15, pp. 1292–1302, 2015.
- Lee, J., Kim, T. J., and Hwan Kim, M., Experimental Study on the Heat and Mass Transfer of Teflon-Coated tubes for the Latent Heat Recovery, Heat Transfer Engineering, vol. 26, no. 2, pp. 28–37, 2005.
- Yeap, B. L., Polley, G. T., Pugh, S. J., and Wilson, D. I., Retrofitting Crude Oil Refinery Heat Exchanger Networks to Minimize Fouling While Maximizing Heat Recovery, Heat Transfer Engineering, vol. 26, no. 1, pp. 23–34, 2005.
- Wang, X., Choon Ng, K., Chakarborty, A., and Baran Saha, B., How Heat and Mass Recovery Strategies Impact the Performance of Adsorption Desalination Plant: Theory and Experiments, Heat Transfer Engineering, vol. 28, no. 2, pp. 147–153, 2007.
- Rabari, R., Mahmud, S., Dutta, A., and Biglarbegian, M., Effect of Convection Heat Transfer on Performance of Waste Heat Thermoelectric Generator, Heat Transfer Engineering, vol. 36, no. 17, pp. 1458–1471, 2015.
- Baskaya, S., Karaaslan, S., Calisir, T., Yilmazoglu, M. Z., and Yilmaz, T. O., Experimental and Numerical Study on Thermoelectric Generator Performance Applied to a Condensing Combi Boiler, Heat Transfer Engineering, vol. 36, no. 14–15, pp. 1292–1302, 2015.
- LaGrandeur, J., Crane, D., Hung, S., Mazar, B., and Eder, A., Automotive Waste Heat Conversion to Electric Power Using Skutterudite, TAGS, PbTe and BiTe, International Conference on Thermoelectrics, 2006, pp. 343–348. doi: 10.1109/ICT.2006.331220
- Hountalas, D., Katsanos, C., Kouremenos, D., and Rogdakis, E., Study of Available Exhaust Gas Heat Recovery Technologies for HD Diesel Engine Applications, International Journal of Alternative Propulsion, vol. 1, pp. 228–249, 2007.
- Bass, J. C., Elsner, N., and Leavitt, F., Performance of the 1 kW Thermoelectric Generator for Diesel Engines, IOP (Institute Of Physics) Publishing Ltd., Kansas, pp. 295–296, 1995.
- Matsubara, K., The Performance of a Segmented Thermoelectric Convertor Using Yb-Based Filled Skutterudites and Bi2Te3-Based Materials, Cambridge Univ. Press, Boston, 2001.
- Xie, H., and Yang, C., Dynamic Behavior of Rankine Cycle System for Waste Heat Recovery of Heavy Duty Diesel Engines Under Driving Cycle, Applied Energy, vol. 112, pp. 130–141, 2013.
- Schroder, E., Neumaier, K., Nagel, F., and Vetter, C., Study on Heat Transfer in Heat Exchangers for a New Supercritical Organic Rankine Cycle, Heat Transfer Engineering, vol. 35, no. 18, pp. 1505–1519, 2014.
- Heidrich, P., and Krisch, T., Assessment of Waste Heat Recovery Options in Passenger Car Applications by Various Rankine Cycles, Heat Transfer Engineering, vol. 36, no. 14–15, pp. 1321–1331, 2015.
- Westerlund, L., Hermansson, R., and Fagerstrom, J., Flue Gas Purification and Heat Recovery: A Biomass Fired Boiler Supplied with an Open Absorption System, Applied Energy, vol. 96, pp. 444–450, 2012.
- Wong, L. T., Mui, K. W., and Guan, Y., Shower Water Heat Recovery in High-Rise Residential Buildings of Hong Kong, Applied Energy, vol. 87, pp. 703–709, 2010.
- Polley, G. T., Picon-Nunez, M., and Lopez-Maciel, J. J., Design of Water and Heat Recovery Networks for the Simultaneous Minimization of Water and Energy Consumption, Applied Thermal Engineering, vol. 30, pp. 2290–2299, 2010.
- Khaled, M., Ramadan, M., Chahine, K., and Assi, A., Prototype Implementation and Experimental Analysis of Water Heating Using Recovered Waste Heat of Chimneys, Case Studies in Thermal Engineering, vol. 5, pp. 127–133, 2015.
- Khaled, M., Ramadan, M., and El Hage, H., Parametric Analysis of Heat Recovery from Exhaust Gases of Generators, Energy Procedia, vol. 75, pp. 3295–3300, 2015.
- Ramadan, M., Gad El Rab, M., and Khaled. M., Parametric Analysis of Air–Water Heat Recovery Concept Applied to HVAC Systems: Effect of Mass Flow Rates, Case Studies in Thermal Engineering, vol. 6, pp. 61–68, 2015.
- Yamashita, J., and Utaka, Y., Improvement in Performance of Secondary Heat Exchanger for Gas Water Heater by Using Narrow Tubes, Heat Transfer Engineering, vol. 36, no. 14–15, pp. 1282–1291, 2015.
- Laskowski, R., and Smyk, A., An Approximate Relation of a Regenerative Heat Exchanger Effectiveness in Off-Design Conditions, Heat Transfer Engineering, vol. 38, no. 1, pp. 37–46, 2017.
- Zhang, Z., Mehendale, S., Tian, J., and Li, Y., Fluid Flow Distribution and Heat Transfer in Plate-Fin Heat Exchangers, Heat Transfer Engineering, vol. 36, no. 9, pp. 806–819, 2015.
- Nguyena, D., and Sana, J., Heat Transfer and Exergy Analysis of a Spiral Heat Exchanger, Heat Transfer Engineering, vol. 37, no. 12, pp. 1013–1026, 2016.
- Bennett, C., A Theory Describing Sedimentation Particulate Fouling Thresholds Inside Heat Exchanger Tubes, Heat Transfer Engineering, vol. 37, no. 5, pp. 468–474, 2016.
- Etemad, S., and Sundén, B., Hydraulic and Thermal Simulations of a Cross-Corrugated Plate Heat Exchanger Unitary Cell, Heat Transfer Engineering, vol. 37, no. 5, pp. 475–486, 2016.
- Tanga, L., Tanb, S., Gao, P., and Zeng, M., Parameters Optimization of Fin-and-Tube Heat Exchanger with a Novel Vortex Generator Fin by Taguchi Method, Heat Transfer Engineering, vol. 37, no. 3–4, pp. 369–381, 2016.
- Xua, Z., Liu, Z., Zhang, Y., and Zhang, Z., The Experiment Investigation of Cooling-Water Fouling Mechanism-Associated Water Quality Parameters in Two Kinds of Heat Exchanger, Heat Transfer Engineering, vol. 37, no. 3–4, pp. 290–301, 2016.
- El-Wakil, M. M., Powerplant Technology, McGraw-Hill Inc, 1 Edition, United Kingdom, 2002.
- Rashid, G., Hekmat, R., Nejat, L. A., Payam, J., and Farzad, J., International Journal of Agriculture and Crop Sciences, vol. 5–7, pp. 688–694, 2013.
- Neuenschwander, P., Good, J., and Nusshaumer, Th., Combustion Efficiency in Biomass Furnaces with Flue Gas Condensation, Biomass for Energy and Industry, 10th European Conference and Technology Exhibition, Wurzburg, Germany, June 8–11, 1998.
- Incropera, F. P., and DeWitt, D. P., Fundamentals of Heat and Mass Transfer, John Wiley & Sons, Seventh Edition, United States of America, 2011.
- Ferguson, C. R., and Kirkpatrick, A. T., Internal Combustion Engines: Applied Thermosciences, John Wiley & Sons, 2nd Edition, New York, 2001.