Thermal Enhancement of Triangular Ducts Using Compound of Vortex Generators and Nanofluids

References

• Gupta, M., Kasana, K. S., and Vasudevan, R., A Numerical Study of The Effect on Flow Structure and Heat Transfer of a Rectangular Winglet Pair in a Plate Fin Heat Exchanger, Journal of Mechanical Engineering and Science, vol. 223 Part C, pp. 2019–2115, 2009.
   Google Scholar
• Akcayoglu, A., Sahin, B., Canpolat, C., and Akilli, H., Experimental Flow Results in a Non-Circular Duct with Heat Transfer Augmenting Obstacles, Proceeding of the World Congress on Engineering, UK, London, June 30–July 2, vol. 2, 2010.
   Google Scholar
• Akcayoglu, A., Flow Past Confined Delta-Wing Type Vortex Generators, Experimental Thermal Fluid Science, vol. 35, pp. 112–120, 2011.
   Web of Science ®Google Scholar
• Heris, S. Z., Talaii, E., and Noie, S. H., CuO/water Nanofluid Heat Transfer Through Triangular Ducts, Iranian Journal of Chemical Engineering, vol. 9, no. 1, pp. 23–32, 2012.
   Google Scholar
• Altemani, C. A. C., and Sparrow, E. M., Turbulent Heat Transfer and Fluid Flow in an Unsymmetrically Heat Triangular Duct, Journal of Heat Transfer, vol. 102, pp. 590–597, 1980.
   Web of Science ®Google Scholar
• Shah, R. K., and London, A. L., Laminar Flow Forced Convection in Ducts, Academic Press, Inc., New York, Chapter 8, pp. 223–246, 1978.
   Google Scholar
• Ahn, S. W., and Son, K. P., Heat Transfer and Pressure Drop in The Roughened Equilateral Triangular Duct, International Communications in Heat and Mass Transfer, vol. 29, no. 4, pp. 479–488, 2002.
   Web of Science ®Google Scholar
• Zhang, L. Z., Laminar Flow and Heat Transfer in Plate-Fin Triangular Duct in Thermally Developing Entry Region, International Journal of Heat and Mass Transfer, vol. 50, pp. 1637–1640, 2007.
   Web of Science ®Google Scholar
• Depaiwa, N., Chompookham, T., and Promvonge, P., Thermal Enhancement in a Solar Air Heater Channel Using Rectangular Winglet Vortex Generators, International Conference on Energy and Sustainable Development, Chiang Mai, Thailand, 2–4 June, pp. 1–7, 2010.
   Google Scholar
• Kotcioğlu, ĭ., Ayhan, T., Olgun, H., and Ayhan, B., Heat Transfer and Flow Structure in a Rectangular Channel with Wing-Type Vortex Generator, Journal of Engineering and Environmental Science, vol. 22, pp. 185–195, 1998.
   Google Scholar
• Wang, C., Lo, J., Lin, Y., and Liu, M., Flow Visualization of Wave-Type Vortex Generators Having Inline Fin-Tube Arrangement, International Journal of Heat and Mass Transfer, vol. 45, pp. 1933–1944, 2002.
   Web of Science ®Google Scholar
• Webb, R. L., Enhancement of Single-Phase Convective Heat Transfer, Handbook of Single-Phase Convective Heat Transfer, John Wiley, New York, 1987.
   Google Scholar
• Chen, Z., Laminar Forced Flow and Heat Transfer in Cross-Corrugated Triangular Ducts, Heat Transfer Engineering, vol. 37, no. 16, pp. 1392–1400, 2016.
   Web of Science ®Google Scholar
• Althaher, M. A., Abdul-Rassol, A. A., Hamdi, E. A., and Mohammed, H. A., Turbulent Heat Transfer Enhancement in a Triangular Duct Using Delta-Winglet Vortex Generators, Heat Transfer–Asian Research, vol. 41, no. 1, pp. 43–62, 2012.
   Google Scholar
• Luo, D. D., Leung, C. W., and Chan, T. L., Optimum Rib Size to Enhance Forced Convection in a Horizontal Triangular Duct with Ribbed Internal Surfaces, Journal of Heat Mass Transfer, vol. 40, pp. 893–900, 2004.
   Google Scholar
• Luo, D. D., Leung, C. W., and Chan, T. L., Forced Convection and Flow Friction Characteristics of Air-Cooled Horizontal Equilateral Triangular Ducts with Ribbed Internal Surfaces, International Journal of Heat and Mass Transfer, vol. 47, pp. 5439–5450, 2004.
   Web of Science ®Google Scholar
• Leung, C. W., Wong, T. T., and Probert, S. D., Enhanced Forced-Convection From Ribbed or Machine-Roughened Inner Surfaces Within Triangular Ducts, Journal of Applied Energy, vol. 69, pp. 87–99, 2001.
   Web of Science ®Google Scholar
• Braga, S. L., and Saboya, F. E. M., Turbulent Heat Transfer and Pressure Drop in an Internally Finned Equilateral Triangular Duct, Journal of Experimental Thermal Fluid Science, vol. 12, pp. 57–64, 1996.
   Web of Science ®Google Scholar
• Biswas, G., and Chattopadhyay, H., Heat Transfer in Channel with Built-In Wing-Type Vortex Generators, International Journal of Heat and Mass Transfer, vol. 35, no. 4, pp. 803–814, 1992.
   Web of Science ®Google Scholar
• Zhu, J. X., Fiebig, M., and Mitra, N. K., Numerical Investigation of Turbulent Flows and Heat Transfer in a Rib-Roughened Channel with Longitudinal Vortex Generators, International Journal of Heat and Mass Transfer, vol. 38, no. 3, pp. 495–501, 1995.
   Web of Science ®Google Scholar
• Kaniewski, M., Hahne, H. W., and Mitra, N. K., Mass Transfer Enhancement by Longitudinal Vortices, Journal of Heat and Mass Transfer, vol. 32, pp. 163–166, 1997.
   Web of Science ®Google Scholar
• Min, C., Qi, C., Kong, X., and Dong, J., Experimental Study of Rectangular Channel with Modified Rectangular Longitudinal Vortex Generators, International Journal of Heat and Mass Transfer, vol. 53, pp. 3023–3029, 2010.
   Web of Science ®Google Scholar
• Jian, M., Yan, P. H., Jun, H., Yan, L. W., and Qiu, W. W., Experimental Investigations on Single-Phase Heat Transfer Enhancement with Longitudinal Vortices in Narrow Rectangular Channel, Nuclear Engineering and Design, vol. 240, pp. 92–102, 2010.
   Web of Science ®Google Scholar
• Saidur, R., Leong, K. Y., and Mohammad, H. A., A Review on Applications and Challenges of Nanofluids, Renewable and Sustainable Energy Reviews, vol. 15, pp. 1646–1668, 2011.
   Web of Science ®Google Scholar
• Das, S. K., Choi, S. U. S., Yu, W., and Pradeep, T., Nanofluids Science and Technology, John Wiley & Sons, Inc., Hoboken, New Jersey, 2008.
   Google Scholar
• Hamdi, E. A., Mohammed, H. A., and Yusoff, M. Z., Heat Transfer Enhancement of Laminar Nanofluids Flow in a Triangular Duct Using Vortex Generator, Superlattices and Microstructures, vol. 52, pp. 398–415, 2012.
   Web of Science ®Google Scholar
• Hamdi, E. A., and Yusoff, M. Z., Impact of Delta-Winglet Pair of Vortex Generators on The Thermal and Hydraulic Performance of a Triangular Channel Using Al2O3–Water Nanofluid, ASME Journal of Heat Transfer, vol. 136, pp. 1–9, 2014.
   Web of Science ®Google Scholar
• Hamdi, E. A., Mohammed, H. A., and Yusoff, M. Z., An Overview on Heat Transfer Augmentation Using Vortex Generators and Nanofluids: Approaches and Applications, Journal of Renewable and Sustainable Energy Reviews, vol. 16, pp. 5951–5993, 2012.
   Web of Science ®Google Scholar
• Heris, S. Z., Noie, S. H., Talaii, E., and Sargolzaei, J., Numerical Investigation of Al2O3/Water Nanofluid Laminar Convective Heat Transfer Through Triangular Duct, Nanoscale Research Letters, vol. 6, pp. 1–10, 2011.
   PubMed Web of Science ®Google Scholar
• Heris, S. Z., Esfahany, M. N., and Etemad, S. Gh., Experimental Investigation of Convective Heat Transfer of Al2O3/Water Nanofluid in Circular Tube, International Journal of Heat and Fluid Flow, vol. 28, pp. 203–210, 2007.
   Web of Science ®Google Scholar
• Mapa, L. B., and Mazhar, S., Heat Transfer In Mini Heat Exchanger Using Nanofluids, Conference of American Society for Engineering Education, April 1–2, Northern Illinois University, DeKalb, Illinois, 2005.
   Google Scholar
• Hwang, K. S., Jang, S. P., and Choi, S. U. S., Flow and Convective Heat Transfer Characteristics of Water-Based Al2O3 Nanofluids in Fully Developed Laminar Flow Regime, International Journal of Heat and Mass Transfer, vol. 52, pp. 193–199, 2009.
   Web of Science ®Google Scholar
• Heris, S. Z., Edalati, Z., Noie, S. H., and Mahian, O., Experimental Investigation of Al2O3/Water Nanofluid Through Equilateral Triangular Duct with Constant Wall Heat Flux in Laminar Flow, Heat Transfer Engineering, vol. 35, no. 13, pp. 1173–1182, 2014.
   Web of Science ®Google Scholar
• Corcione, M., Rayleigh–Bénard Convection Heat Transfer in Nanoparticle Suspensions, International Journal of Heat and Fluid Flow, vol. 32, pp. 65–77, 2011.
   Web of Science ®Google Scholar
• Koo, J., and Kleinstreuer, C., A New Thermal Conductivity Model for Nanofluids, Journal of Nanoparticle Research, vol. 6, pp. 577–588, 2004.
   Web of Science ®Google Scholar
• Vajjha, R. S., and Das, D. K., Experimental Determination of Thermal Conductivity of Three Nanofluids and Development of New Correlations, International Journal of Heat and Mass Transfer, vol. 52, pp. 4675–4682, 2009.
   Web of Science ®Google Scholar
• Pack, B. C., and Cho, Y. I., Hydrodynamic and Heat Transfer Study of Dispersed Fluids with Submicron Metallic Oxide Particles, Experimental Heat Transfer, vol. 11, no. 2, pp. 151–170, 1998.
   Web of Science ®Google Scholar
• Khanafar, K., Vafai, K., and Lightstone, M., Buoyancy-Driven Heat Transfer Enhancement in a Two-Dimensional Enclosure Utilizing Nanofluids, International Journal of Heat and Mass Transfer, vol. 46, no. 19, pp. 3639–3653, 2003.
   Web of Science ®Google Scholar
• Tian, L., He, Y., Lei, Y., and Tao, W., Numerical Study of Fluid Flow and Heat Transfer in a Flat-Plate Channel with Longitudinal Vortex Generators by Applying Field Synergy Principle Analysis, International Communications in Heat and Mass Transfer, vol. 3, pp. 111–120, 2009.
   Google Scholar
• Wu, J. M., Research on The Enhancement of Natural and Forced Convective Heat Transfer by Longitudinal Fins and by Longitudinal Vortex Generator. Ph.D. thesis. Xi'an Jiaotong University, 2006.
   Google Scholar
• Hamdi, E. A., Ahmed, M. I., Yusoff, M. Z., Hawlader, M. N. A., and Habeeb, A., Experimental Study of Heat Transfer Augmentation in Non-Circular Duct Using Combined Nanofluids and Vortex Generator, International Journal of Heat and Mass Transfer, vol. 90, pp. 1197–1206, 2015.
   Web of Science ®Google Scholar
• Hamdi, E. A., Ahmed, M. I., and Yusoff, M. Z., Heat Transfer Enhancement in a Triangular Duct Using Compound Nanofluids and Turbulators, Applied Thermal Engineering, vol. 91, pp. 191–201, 2015.
   Web of Science ®Google Scholar