160
Views
7
CrossRef citations to date
0
Altmetric
Original Articles

Novel Approach to Estimate the Optimum Zone Fuel Mass Flow Rates for a Walking Beam Type Reheating Furnace

, , &

References

  • Kim, J. G., and Huh, K. Y., Prediction of Transient Slab Temperature Distribution in the Re-Heating Furnace of a Walking-Beam Type for Rolling of Steel Slabs, ISIJ International, vol. 40, pp. 1115–1123, 2000.
  • Ishii, T., Zhang, C., and Hino, Y., Numerical Study of the Performance of a Regenerative Furnace, Heat Transfer Engineering, vol. 23, pp. 23–33, 2002.
  • Kim, M. Y., A Heat Transfer Model for the Analysis of Transient Heating of the Slab in a Direct-Fired Walking Beam Type Reheating Furnace, International Journal of Heat and Mass Transfer, vol. 50, pp. 3740–3748, 2007.
  • Hsieh, C. T., Huang, M. J., Lee, S. T., and Wang, C. H., Numerical Modeling of a Walking-Beam-Type Slab Reheating Furnace, Numerical Heat Transfer Part A: Application, vol. 53, pp. 966–981, 2008.
  • Han, S. H., Baek, S. W., and Kim, M. Y., Transient Radiative Heating Characteristics of Slabs in Walking Beam Type Reheating Furnace, International Journal of Heat and Mass Transfer, vol. 52, pp. 1005–1011, 2009.
  • Han, S. H., and Chang, D. J., Optimum Residence Time Analysis for a Walking Beam Type Reheating Furnace, International Journal of Heat and Mass Transfer, vol. 55, pp. 4079–4087, 2012.
  • Steinboeck, A., Wild, D., Kiefer, T., and Kugi, A., A Mathematical Model of a Slab Reheating Furnace with Radiative Heat Transfer and Non-Participating Gaseous Media, International Journal of Heat and Mass Transfer, vol. 53, pp. 5933–5946, 2010.
  • Singh, V. K., and Talukdar, P., Comparisons of Different Heat Transfer Models of a Walking Beam Type Reheat Furnace, International Commutation of Heat and Mass Transfer, vol. 47, pp. 20–26, 2013.
  • Singh, V. K., Talukdar, P., and Coelho, P. J., Performance Evaluation of Two Heat Transfer Models of a Walking Beam Type Reheat Furnace, Heat Transfer Engineering, vol. 36, no. 1, pp. 91–101, 2015.
  • Hsieh, C. T., Huang, M. J., Lee, S. T., and Wang, C. H., A Numerical Study of Skid Marks on the Slabs in a Walking-Beam Type Slab Reheating Furnace, Numerical Heat Transfer Part A: Application, vol. 57, pp. 1–17, 2010.
  • Han, S. H., Chang, D., and Huh, C., Efficiency Analysis of Radiative Slab Heating in a Walking-Beam-Type Reheating Furnace, Energy, vol. 36, pp. 1265–1272, 2010.
  • Cheng, Q., Zhang, X., Wang, Z., Zhou, H., and Ahao, S., Three-Dimensional Temperature Distributions and Radiative Properties Based on Radiation Image Processing Technology in a Gas-Fired Pilot Tubular Furnace, Heat Transfer Engineering, vol. 35, no. 6–8, pp. 770–779, 2014.
  • Amiri, H., Mansouri, S. H., and Coelho, P. J., Inverse Optimal Design of Radiant Enclosures With Participating Media: A Parametric Study, Heat Transfer Engineering, vol. 34, pp. 288–302, 2013.
  • Jang, J. Y., and Huang, J. B., Optimization of a Slab Heating Pattern for Minimum Energy Consumption in a Walking-Beam Type Reheating Furnace, Applied Thermal Engineering, vol. 85, pp. 313–321, 2015.
  • Shah, M., Talukdar, P., and Subbarao, P. M. V., Modelling of Gas Radiation with Different Shapes of Heat Source in Three-Dimensional Enclosures with Convective Boundary Condition, Heat Transfer Engineering, vol. 33, no. 7, pp. 651–660, 2012.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.