Numerical Modeling of Fin Heat Exchanger in Application to Cold Storage

References

• Bilirgen, H., Dunbar, S., and Levy, E. K., Numerical Modeling of Finned Heat Exchangers, Applied Thermal Engineering, vol. 61, pp. 278–288, 2013.
   Web of Science ®Google Scholar
• Selma, B., Désilets, M., and Proulx, P., Optimization of an Industrial Heat Exchanger using an Open-source CFD Code, Applied Thermal Engineering, vol. 69, pp. 241–250, 2014.
   Web of Science ®Google Scholar
• Taler, D., and Ocłoń, P., Determination of Heat Transfer Formulas for Gas flow in fin-and-Tube Heat Exchanger with Oval Tubes using CFD Simulations, Chemical Engineering and Processing, vol. 83, pp. 1–11, 2014.
   Web of Science ®Google Scholar
• Glazar, V., Trp, A., and Lenic, C., Numerical Study Of Heat Transfer And Analysis Of Optimal Fin Pitch In A Wavy Fin-And-Tube Heat Exchanger, Heat Transfer Engineering, vol. 33, no. 2, pp. 88–96, 2012.
   Web of Science ®Google Scholar
• Yakar, G., and Karabacak, R., Effects Of Different Fin Spacings On The Nusselt Number And Reynolds Number In Perforated Finned Heat Exchangers, Heat Transfer Engineering, vol. 32, no. 5, pp. 399–407, 2011.
   Web of Science ®Google Scholar
• Łopata, S., and Ocłoń, P., Numerical Study of the Effect of Fouling on Local Heat Transfer Conditions in a High-Temperature fin-and-tube Heat Exchanger, Energy, vol. 92, pp. 100–116, 2015.
   Web of Science ®Google Scholar
• Haglund Stignor, C., Sunden, B., Fahlen, P., and Stensson, S., Heat Transfer And Pressure Drop Under Dry And Humid Conditions In Flat-Tube Heat Exchangers With Plain Fins, Heat Transfer Engineering, vol. 31, no. 3, pp. 179–192, 2010.
   Web of Science ®Google Scholar
• Wang, C.-C., Lee, W.-S., and Sheua, W.-J., New Approach To Correlate The Frictional Performance Of Fin-And-Tube Heat Exchangers In Wet Conditions, Heat Transfer Engineering, vol. 23, pp. 15–21, 2002.
   Web of Science ®Google Scholar
• Martinez, E., Vicente, W., Salinas-Vazquez, M., Carvajal, I., and Alvarez, M., Numerical Simulation of Turbulent Air flow on a Single Isolated finned Tube Module with Periodic Boundary Conditions, International Journal of Thermal Sciences, vol. 92, pp. 58–71, 2015.
   Web of Science ®Google Scholar
• Singh, V., Abdelaziz, O., Aute, V., and Radermacher, R., Simulation of Air-to-Refrigerant fin-and-Tube Heat Exchanger with CFD-Based Air Propagation, International Journal of Refrigeration, vol. 34, pp. 1883–1897, 2011.
   Web of Science ®Google Scholar
• Yaici, W., Ghorab, M., and Entchev, E., 3D CFD Analysis of the Effect of Inlet Air flow Maldistribution on the fluid flow and Heat Transfer Performances of Plate-fin-and-Tube Laminar Heat Exchangers, International Journal of Heat and Mass Transfer, vol. 74, pp. 490–500, 2014.
   Web of Science ®Google Scholar
• Rossetti, A., Minetto, S., and Marinetti, S., A Simplified Thermal CFD Approach to fins and Tube Heat Exchanger: Application to Maldistributed Airflow on an Open Display Cabinet, International Journal of Refrigeration, vol. 57, pp. 208–2015, 2015.
   Web of Science ®Google Scholar
• T'joen, C., Willockx, A., Steeman, H.-J., and DE PAEPE, M., Performance Prediction Of Compact Fin-And-Tube Heat Exchangers In Maldistributed Airflow, Heat Transfer Engineering, vol. 28, no. 12, pp. 986–996, 2007.
   Web of Science ®Google Scholar
• Cui, J., Li, W. Z., Liu, Y., and Zhao, Y. S., A New Model for Predicting Performance of fin-and-Tube Heat Exchanger under Frost Condition, International Journal of Heat and Fluid Flow, vol. 32, pp. 249–260, 2011.
   Web of Science ®Google Scholar
• Cui, J., Li, W. Z., Liu, Y., and Jiang, Z. Y., A New Time- and Space-Dependent Model for Predicting Frost Formation, Applied Thermal Engineering, vol. 31, pp. 447–457, 2011.
   Web of Science ®Google Scholar
• Huang, J. M., Hsieh, W. C., Ke, X. J., and Wang, C. C., The Effects of Frost Thickness on the Heat Transfer of finned Tube Heat Exchanger Subject to the Combined Influence of Fan Types, Applied Thermal Engineering, vol. 28, pp. 728–737, 2008.
   Web of Science ®Google Scholar
• Lai, Y., Lu, M., and Wang, Q., A Large Eddy Simulation Of Plate - Fin And Tube Heat Exchangers With Small Diameter Tubes, Heat Transfer Engineering, vol. 35, no. 11–12, pp. 1137–1143, 2014.
   Web of Science ®Google Scholar
• Chourasia, M. K., and Goswami, T. K., Steady State CFD Modeling of Airflow, Heat Transfer and Moisture Loss in a Commercial Potato Cold Store, International Journal of Refrigeration, vol. 30, pp. 672–689, 2007.
   Web of Science ®Google Scholar
• Hoang, M. L., Verboven, P., De Baerdemaeker, J., and Nicolai, B. M., Analysis of the Air Flow in a Cold Store by Means of Computational Fluid Dynamics, International Journal of Refrigeration, vol. 23, pp. 127–140, 2000.
   Web of Science ®Google Scholar
• Delele, M. A., Schenk, A., Tijskens, E., Ramon, H., Nicolai, B. M., and Verboven, P., Optimization of the Humidification of Cold Stores by Pressurized Water Atomizers based on a Multiscale CFD Model, Journal of Food Engineering, vol. 91, pp. 228–239, 2009.
   Web of Science ®Google Scholar
• ANSYS® Academic Research, Release 16.0, Help System, ANSYS FLUENT Theory Guide, ANSYS, Inc., Canonsburg, PA, 2015.
   Google Scholar