References
- Zhang, Q., Chen, L., Su, X., Chen, X., Chen, S., and Hou, Y., Numerical Modeling of Recuperative Cryogenic Matrix Heat Exchangers and the Experimental Validation, International Journal of Thermal Sciences, vol. 104, pp. 330–341, 2016.
- Sunil Kumar, S., Ratna Raju, L., and Nandi, T. K., Thermal Performance of Perforated Plate Matrix Heat Exchangers with Effects From Outer Wall and Flow Channel Geometry, Cryogenics, vol. 72, pp. 153–160, 2015.
- Ratna Raju, L., and Nandi, T. K., Effective NTU of a Counterflow Heat Exchanger with Unbalanced Flow and Longitudinal Heat Conduction Through Fluid Separating and Outer Walls, Applied Thermal Engineering, vol. 112, pp. 1172–1177, 2017.
- Kitto, Jr. J. B., and Robertson, J. M., Effects of Maldistribution of Flow on Heat Transfer Equipment Performance, Heat Transfer Engineering, vol. 10, pp. 18–25, 1989.
- Zhang, Z., Mehendale, S., Tian, J., and Li, Y., Fluid Flow Distribution and Heat Transfer in Plate-Fin Heat Exchangers, Heat Transfer Engineering, vol. 39, pp. 806–819, 2015.
- Rasouli, E., and Narayanan, V., Single-Phase Cryogenic Flow and Heat Transfer Through Microscale Pin Fin Heat Sinks, Heat Transfer Engineering, vol. 37, pp. 994–1011, 2016.
- Liu, J., Chung, M., and Park, S., Calculation of Two-Phase Convective Heat Transfer Coefficients of Cryogenic Nitrogen Flow in Plate-Fin Type Heat Exchangers, Heat Transfer Engineering, vol. 35, pp. 674–684, 2014.
- Swift, G., Migliori, A., and Wheatley, J., Construction and Measurements with an Extremely Compact Cross-Flow Heat Exchanger, Heat Transfer Engineering, vol. 6, pp. 39–47, 1985.
- Georgiev, J., and Kowatchev, V. T., Multichannel Low Temperature Exchanger, Cryogenics, vol. 14, pp. 25–28, 1974.
- Bova, V. I., Zablotskaya, N. S., Vaselov, V. A., and Samusenkov, N. V., Development of Efficient Regenerators for Air-Fractionating Units, Transl. Chem. Petr. Eng, vol. 7, pp. 309–313, 1978.
- Vonk, G., A new Type of Compact Heat Exchanger with High Thermal Efficiency, Advances in Cryogenic Engineering, vol. 13, pp. 582–589, 1968.
- Venkatarathnam, G., and Sarangi, S., An Apparatus for Testing of Small Cryogenic Heat Exchangers, Review of Scientific Instruments, vol. 67, pp. 584–588, 1996.
- Ahuja, V., and Green, R., Application of Matrix Heat Exchangers to Thermomechanical Exergy Recovery From Liquid Hydrogen, Cryogenics, vol. 38, pp. 857–867, 1998.
- White, M. J., Nellis, G. F., Klein, S. A., Zhu, W., and Gianchandani, Y. B., An Experimentally Validated Numerical Modeling Technique for Perforated Plate Heat Exchangers, Journal of Heat Transfer, vol. 132, pp. 111801-1-9, 2010.
- Gifford, W. E., and Acharya, A., Low Temperature Regenerator test Apparatus, Advances in Cryogenic Engineering, vol. 15, pp. 436–442, 1970.
- Hoch, D. W., Nellis, G. F., Meagher, N. L., Maddocks, J. R., and Stephens, S., Development and testing of a multi-plate recuperative heat exchanger for use in a hybrid cryocooler, In: Miller, S. D., and Ross, Jr R. G. (Eds.), Cryocoolers, vol. 14, Int Cryocooler Conference Inc., Boulder Co, pp. 515–524, 2007.
- Venkatarathnam, G., and Sarangi, S., Matrix Heat Exchangers and Their Application in Cryogenic Systems, Cryogenics, vol. 30, pp. 907–918, 1990.
- Farhani, F., Matrix heat exchangers for cryogenic applications, Ph.D thesis, Indian Institute of Technology, Kharagpur, India, 1996.
- Lemmon, E. W., Huber, M. L., and McLinden, M. O., Reference Fluid Thermodynamic and Transport Properties (REFPROP): Version 9.1, Standard Reference Database 23, National Institute of Standards and Technology (NIST), Boulder Co, 2010.
- Sunil Kumar, S., Perforated plate heat exchangers: modeling, fabrication and performance evaluation, Ph.D thesis, Indian Institute of Technology, Kharagpur, India, 2014.
- Sunil Kumar, S., and Nandi, T. K., Fabrication of Perforated Plate Heat Exchangers, Journal of Machining and Forming Technology, vol. 5, pp.63–74, 2012.
- Bejan, A., Convection Heat Transfer, 2nd ed., John Wiley &Sons, New York, 1995.
- Launder, B. E., and Spalding, D. B., The numerical computation of turbulent flows, Computer Methods in Applied Mechanics and Engineering, vol. 3, pp. 269–289, 1974.
- Fluent user's guide, 12.10.2, Standard wall functions, Ansys, Inc, Pennsylvania, US, (https://www.sharcnet.ca/ Software/Fluent6/html/ug/node512.htm).