Experimental Study on Laminar Forced Convection of Al₂O₃/Water and Multiwall Carbon Nanotubes/Water Nanofluid of Varied Particle Concentration with Helical Twisted Tape Inserts in Pipe Flow

References

• Choi, S. U. S., Enhancing Thermal Conductivity of Fluids with Nanoparticles, in Developments and Applications of Non-Newtonian Flows ed. D.A. Siginer, H.P. Wang, pp. 99–105, ASME, New York, fed-vol. 231/MD-vol. 66, 1995.
   Google Scholar
• Varun Garg, M. O., Nautiyal, H., Khurana, S., and Shukla, M. K., Heat Transfer Augmentation using Twisted Tape Inserts: A Review, Renewable and Sustainable Energy Reviews, vol. 63, pp. 193–225, 2016.
   Web of Science ®Google Scholar
• Khalifa, A. J. N., and Banwan, M. A., Effect of Volume Fraction of γ‐Al2O3 Nanofluid on Heat Transfer Enhancement in a Concentric Tube Heat Exchanger, Heat Transfer Engineering, vol. 39, no. 16, pp. 1387–1396, 2015.
   Google Scholar
• Colla, L., Fedele, L., Manca, O., Marinelli, L., and Nardini, S., Experimental and Numerical Investigation on Forced Convection in Circular Tubes with Nanofluids, Heat Transfer Engineering, vol. 37, no. 13–14, pp. 1201–1210, 2016.
   Web of Science ®Google Scholar
• Ho, C. J., Chang, C. Y., Cheng, C. Y., Cheng, S. J., Guo, Y. W., Hsu, S. T., and Yan, W. M., Laminar Forced Convection Effectiveness of Al2O3 Water Nanofluid Flow in a Circular Tube at Various Operation Temperatures: Effects of Temperature-Dependent Properties, International Journal of Heat and Mass Transfer, vol. 100, pp. 464–481, 2016.
   Web of Science ®Google Scholar
• Sivashanmugam, P., and Suresh, S., Experimental Studies on Heat Transfer and Friction Factor Characteristics of Laminar Flow through a Circular Tube Fitted with Helical Screw-tape Inserts, Applied Thermal Engineering, vol. 26, pp. 1990–1997, 2006.
   Web of Science ®Google Scholar
• Sivashanmugam, P., and Suresh, S., Experimental Studies on Heat Transfer and Friction Factor Characteristics of Turbulent Flow through a Circular Tube Fitted with Helical Screw-tape Inserts, Applied Thermal Engineering, vol. 27, pp. 1311–1319, 2007.
   Web of Science ®Google Scholar
• Sivashanmugam, P., and Suresh, S., Experimental Studies on Heat Transfer and Friction Factor Characteristics of Turbulent Flow through a Circular Tube Fitted with Helical Screw-tape Inserts, Journal of Chemical Engineering and Process, vol. 46, no. 12, pp. 1292–1298, 2007.
   Web of Science ®Google Scholar
• Gunes, S., and Karakaya, E., Thermal Characteristics in a Tube with Loose-fit Perforated Twisted Tapes, Experimental Studies on Heat Transfer and Friction Factor Characteristics of Laminar Flow through a Circular tube Fitted with Regularly Spaced Helical Screw-tape Inserts, Heat Transfer Engineering, vol. 39, no. 18, pp. 1504–1517, 2015.
   Google Scholar
• Patil, S. V., and Babu, P. V. V., Heat Transfer and Pressure Drop Studies Through a Square Duct fitted with Increasing and Decreasing Order of Twisted tape, Heat Transfer Engineering, vol. 35, no. 14–15, pp. 1380–1387, 2014.
   Web of Science ®Google Scholar
• Buschmann, M. H., Nanofluid Heat Transfer in Laminar Pipe Flow With Twisted Tape, Heat Transfer Engineering, vol. 38, no. 2, pp. 162–176, 2017.
   Web of Science ®Google Scholar
• Sharma, K. V., Sundar, L. S., and Sarma, P. K., Estimation of Heat Transfer Coefficient and Friction Factor in the Transition Flow with Low Volume Concentration of Al2O3 Nanofluid Flowing in a Circular Tube and with Twisted Tape Insert, International Communications in Heat and Mass Transfer, vol. 39, pp. 503–507, 2009.
   Google Scholar
• Chandrasekar, M., Suresh, S., and Bose, A. C., Experimental Studies on Heat Transfer and Friction Factor Characteristics of Al2O3/Water Nanofluid in a Circular Pipe under Laminar Flow with Wire Coil Inserts, Experimental Thermal and Fluid Science, vol. 34, pp. 122–130, 2009.
   Web of Science ®Google Scholar
• Sharma, K. V., Sundar, L. S., and Sarma, P. K., Estimation of Heat Transfer Coefficient and Friction Factor in the Transition Flow with Low Volume Concentration of Al2O3 Nanofluid Flowing in a Circular Tube and with Twisted Tape Insert, International Communications in Heat and Mass Transfer, vol. 39, no. 5, pp. 503–507, 2009.
   Google Scholar
• Sundar, L. S., and Sharma, K. V., Heat Transfer Enhancements of Low Volume Concentration Al2O3 Nanofluid and with Longitudinal Strip Inserts in a Circular Tube, International Journal of Heat and Mass Transfer, vol. 53, no. 19–20, pp. 4280–4286, 2010.
   Web of Science ®Google Scholar
• Sundar, L. S., and Sharma, K. V., Turbulent Heat Transfer and Friction Factor of Al2O3 Nanofluid in Circular Tube with Twisted Tape Inserts, International Journal of Heat and Mass Transfer, vol. 53, no. 7–8, pp. 1409–1416, 2010.
   Web of Science ®Google Scholar
• Wongcharee, K., and Smith, E., Enhancement of Heat Transfer Using CuO/Water Nanofluid and Twisted Tape with Alternate Axis, International Communications in Heat and Mass Transfer, vol. 38, no. 6, pp. 742–748, 2011.
   Web of Science ®Google Scholar
• Naik, M. T., and Sundar, L. S., Heat Transfer and Friction Factor with Water/propylene Glycol- based CuO Nanofluid in Circular Tube with Helical Inserts under Transition Flow Regime, Heat Transfer Engineering, vol. 35, no. 1, pp. 53–62, 2014.
   Web of Science ®Google Scholar
• Chandrasekar, M., Suresh, S., and Bose, C. A., Experimental Studies on Heat Transfer and Friction Factor Characteristics of Al2O3/Water Nanofluid in a Circular Pipe Under Laminar Flow with Wire Coil Inserts, Experimental Thermal and Fluid Science, vol. 34, no. 2, pp. 122–130, 2010.
   Web of Science ®Google Scholar
• Chandrasekar, M., Suresh, S., and Bose, C. A., Experimental Studies on Heat Transfer and Friction Factor Characteristics of Al2O3/Water Nanofluid in a Circular Pipe Under Transition Flow with Wire Coil Inserts, Heat Transfer Engineering, vol. 32, pp. 495–496, 2011.
   Web of Science ®Google Scholar
• Suresh, S., Venkitaraj, K. P., and Selvakumar, P., Comparative Study on Thermal Performance of Helical Screw Tape Inserts in Laminar Flow using Al2O3/Water and CuO/Water Nanofluids, Superlattices and Microstructures, vol. 49, pp. 608–622, 2011.
   Web of Science ®Google Scholar
• Suresh, S., Venkitaraj, K. P., Selvakumar, P., and Chandrasekar, M. A., Comparison of Thermal Characteristics of Al2O3/Water and CuO/Water Nanofluids in Transition Flow through a Straight Circular Duct Fitted with Helical Screw Tape Inserts, Experimental Thermal and Fluid Science, vol. 39, pp. 37–44, 2012.
   Web of Science ®Google Scholar
• Sundar, L. S., Ravi Kumar, N. T., Naik, M. T., and Sharma, K. V., Effect of Full Length Twisted Tape Inserts on Heat Transfer and Friction Factor Enhancement with Fe3o4 magnetic Nanofluid Inside a Plain Tube: An Experimental Study, International Journal of Heat and Mass Transfer, vol. 55, pp. 2761–2768, 2012.
   Web of Science ®Google Scholar
• Naik, M. T, and Sundar, L. S., Heat Transfer and Friction Factor with Water/propylene Glycol-based CuO Nanofluid in Circular Tube with Helical Inserts under Transition flow Regime, Heat Transfer Engineering, vol. 35, pp. 53–62, 2014.
   Web of Science ®Google Scholar
• Aliabadi, M. K., and Eskandari, M., Influence of Twist Length Variations on Thermal–Hydraulic Specifications of Twisted-tape Inserts in Presence of Cu–water Nanofluid, Experimental Thermal and Fluid Science, vol. 61, pp. 230–240, 2015.
   Web of Science ®Google Scholar
• Sadeghi, O., Mohammed, H. A., Nejad, M. B., and Wahid, M. A., Heat Transfer and Nanofluid Flow Characteristics through a Circular Tube Fitted with Helical Tape Inserts, International Communications in Heat and Mass Transfer, vol. 71, pp. 234–244, 2016.
   Web of Science ®Google Scholar
• Saidur, R., Leong, K. Y., and Mohamma, H. A., A Review on Applications and Challenges of Nanofluids, Renewable & Sustainable Energy Reviews, vol. 15, pp. 1646–1668, 2011.
   Web of Science ®Google Scholar
• Chougule, S. S., Sahu, S. K., Pise, A. T., and Pardeshi, P. S., Studies of CNT-Nanofluid in Two Phase System, International Journal of Global Technology Initiatives, vol. 1, pp. F14–F20, 2014.
   Google Scholar
• Chougule, S. S., Sahu, S. K., and Pise, A. T., Thermal Performance of Two Phase Thermosyphon Flat-Plate Solar Collectors by Using Nanofluid, ASME Journal of Solar Energy, vol. 136, pp. 014503 (5 pages), 2014.
   Web of Science ®Google Scholar
• Chougule, S. S., Sahu, S. K., and Pise, A. T., Performance Enhancement of Two Phase Thermosyphon Flat-Plate Solar Collectors by Using Surfactant and Nanofluid, Frontier Heat Pipes, vol. 4, pp. 1–6, 2013.
   Google Scholar
• Chougule, S. S., and Sahu, S. K., Performance of CNT-Water Nanofluid Charged Wickless Heat Pipe Flat Plate Solar Collectors Having Different Filling Ratio, ASME Journal of Solar Energy, vol. 137, no. 2, pp. 024501 (4 pages), 2014.
   Web of Science ®Google Scholar
• Chougule, S.S., Sahu, S.K., Thermal Performance of Nanofluid Charged Heat Pipe With Phase Change Material for Electronics Cooling, ASME- Journal of Electronics Packaging, vol. 137, no. 2, pp. 021004–1 (7 pages), 2014.
   Web of Science ®Google Scholar
• Chougule, S. S., and Sahu, S. K., Comparative Study on Heat Transfer Enhancement of Low Volume Concentration of Al2O3 –Water and Carbon Nanotube–Water Nanofluids in Laminar Regime Using Helical Screw Tape Inserts, Journal of Nanotechnology in Engineering and Medicine, vol. 4, no. 4, pp. 040904 (9 pages), 2014.
   Google Scholar
• Chougule, S. S., and Sahu, S. K., Experimental Investigation of Heat Transfer Augmentation in Automobile Radiator with CNT/Water Nanofluid, ASME-International Conference on Micro/Nanoscale Heat & Mass Transfer (MNHMT2013), Hong Kong China, December 11–14, 2013.
   Google Scholar
• Chougule, S. S., and Sahu, S. K., An Integrated Effect of PCM and Nanofluid Charged Heat Pipe for Electronics Cooling, ASME- 12th International Conference on Nanochannels, Microchannels, and Minichannels, Chicago, USA, August 3–7, 2014.
   Google Scholar
• Chougule, S. S., and Sahu, S. K., Heat Transfer and Friction Characteristics of Al2O3/water and CNT/water Nanofluids in Transition flow using Helical Screw Tape Inserts - A Comparative Study, Chemical Engineering and Processing: Process Intensification, vol. 88, pp. 78–88, 2015.
   Web of Science ®Google Scholar
• Chougule, S. S., and Sahu, S. K., Comparative Study of Cooling Performance of Automobile Radiator Using Al2O3/Water and CNT/Water Nanofluid, ASME Journal of Nanotechnology in Engineering and Medicine, vol. 5, no. 1, pp. 010901 (6 pages), 2014.
   Google Scholar
• Chougule, S. S., and Sahu, S. K., Thermal Performance of Automobile Radiator Using Carbon Nanotube-Water Nanofluid-Experimental Study, ASME- Journal of Thermal Science and Engineering Applications, vol. 6, no. 4, pp. 041009 (6 pages), 2014.
   Web of Science ®Google Scholar
• Shah, R. K., Thermal entry length solutions for the circular tube and parallel plates, Proceedings of Third National Heat Mass Transfer Conference, Indian Institute of Technology, Bombay, December 11 – 13, 1975.
   Google Scholar
• Coleman, H. W., and Steele, W. G., Experimental and Uncertainty Analysis for Engineers, Wiley, New York, 1989.
   Google Scholar
• ANSI/ASME, Measurement uncertainty, Supplement to ASME Performance Test Codes, PTC 19.1-1985, American Society of Mechanical Engineers, New York, 1985.
   Google Scholar
• Rathnakumar, P., Mayilsamy, K., Suresh, S., and Murugesan, P., Laminar Heat Transfer and Friction Factor Characteristics of Carbon Nanotube/Water Nanofluids, Journal of Nanoscience and Nanotechnology, vol. 14, no. 3, pp. 2400–2407, 2014.
   PubMed Web of Science ®Google Scholar
• Usui, H., Sano, Y., Iwashita, K., and Isozaki, A., Enhancement of heat transfer by a combination of internally grooved rough tube and twisted tape, International Chemical Engineering, vol. 26, no. 1, pp. 97–104, 1986.
   Google Scholar