Predictions of In-Tube Cooling Heat Transfer Coefficients and Pressure Drops of CO₂ and Lubricating Oil Mixture at Supercritical Pressures

References

• G. Lorentzen, “The use of natural refrigerants: A complete solution to the CFC/HCFC predicament,” Int. J. Refrigeration, vol. 18, no. 3, pp. 190–197, 1995.
   Web of Science ®Google Scholar
• Z. Ayub, “Recent developments in CO2 heat transfer,” Heat Transf. Eng.,” vol. 26, no. 6, pp. 3–6, 2005.
   Web of Science ®Google Scholar
• J. Pettersen, A. Hafner, G. Skaugen, and H. Rekstad, “Development of compact heat exchangers for CO2 air conditioning systems,” Int. J. Refrigeration, vol. 21, no. 3, pp. 180–193, 1998.
   Web of Science ®Google Scholar
• E. A. Groll, and J. H. Kim, Review article: review of recent advances toward trans-critical CO2 cycle technology,” HVAC&R Res., vol. 13, no. 3, pp. 499–520, 2007.
   Web of Science ®Google Scholar
• M. H. Kim, J. Pettersen, and C. W. Bullard, “Fundamental process and system design issues in CO2 vapour compression systems,” Prog. Energy Comb. Sci., vol. 30, no. 2, pp. 119–174, 2004.
   Web of Science ®Google Scholar
• H. Yamaguchi, X. R. Zhang, K. Fujima, M. Enomoto, and N. Sawada, “Solar energy powered Rankine cycle using supercritical CO2,” Appl. Therm. Eng., vol. 26, no. 17–18, pp. 2345–2354, 2006.
   Web of Science ®Google Scholar
• J. D. Osorio, R. Hovsapian, and J. C. Ordonez, “Dynamic analysis of concentrated solar supercritical CO2-based power generation closed-loop cycle,” Appl. Therm. Eng., vol. 93, pp. 920–934, 2016.
   Web of Science ®Google Scholar
• S. M. Lee, and K. Y. Kim, “A Parametric Study of the thermal-hydraulic performance of a zigzag printed circuit heat exchanger,” Heat Transf. Eng., vol. 35, no. 13, pp. 1192–1200, 2014.
   Web of Science ®Google Scholar
• B. T. Austin, and K. Sumathy, “Transcritical carbon dioxide heat pump systems: a review,” Renewable Sustainable Energy Rev., vol. 15, no. 8, pp. 4013–4029, 2011.
   Web of Science ®Google Scholar
• E. W. Lemmon, M. L. Huber, and M. O. McLinden, “Reference fluid thermodynamic and transport properties, NIST standard reference database 23, version 8.0,” 2007.
   Google Scholar
• H. Mori, S. Nakamura, F. Ono, K. Kariya, and S. Umezawa, “A study on characteristics of cooling heat transfer of supercritical pressure fluids in a plate heat exchanger,” Heat Transf. Eng., vol. 37, no. 7–8, pp. 659–667, 2016.
   Web of Science ®Google Scholar
• Z. X. Du, W. S. Lin, and J. M. Gu, “Numerical investigation for heat transfer of supercritical CO2 cooled in a vertical circular tube,” Heat Transf. Eng., vol. 33, no. 10, pp. 905–911, 2012.
   Web of Science ®Google Scholar
• A. T. Prata, and J. R. Jr. Barbosa, “Role of the thermodynamics, heat transfer, and fluid mechanics of lubricant oil in hermetic reciprocating compressors,” Heat Transf. Eng., vol. 30, no. 7, pp. 533–548, 2009.
   Web of Science ®Google Scholar
• Y. T. Ma, H. Q. Guan, M. X. Li, and J. Yung, “Study of lubricant for CO2 trans-critical cycle system,” J. Tianjin Univ., vol. 37, no. 9, pp. 783–786, 2004.
   Google Scholar
• A. P. Zingerli, and E. A. Groll, “Influence of refrigeration oil on the heat transfer and pressure drop of supercritical CO2 during in-tube cooling,” Proceedings of the Fourth IIR-Gustav Lorentzen Conference, Purdue, IN, pp. 269–278, 2000.
   Google Scholar
• K. Mori, J. Onishi, and H. Shimaoka, “Cooling heat transfer characteristics of CO2 and CO2–oil mixture at super-critical pressure conditions,” Proceedings of the Asian Conference on Refrigeration and Air Conditioning, Kobe, Japan, pp. 81–86, 2002.
   Google Scholar
• L. Gao, and T.Honda, “Experiments on heat transfer characteristics of heat exchanger for CO2 heat pump system,” Proceedings of the Asian Conference on Refrigeration and Air Conditioning, Kobe, Japan, pp. 75–80, 2002.
   Google Scholar
• R. Yun, Y. Hwang, and R. Radermacher, “Convection gas cooling heat transfer and pressure drop characteristics of supercritical CO2/oil mixture in a minichannel tube,” Int. J. Heat Mass Transf., vol. 50, no. 23–24, pp. 4796–4804, 2007.
   Web of Science ®Google Scholar
• C. B. Dang, K. Iino, K. Fukuoka, E. Hihara, “Effect of lubricating oil on cooling heat transfer of supercritical carbon dioxide,” Int. J. Refrigeration, vol. 30, no. 4, pp. 724–731, 2007.
   Web of Science ®Google Scholar
• C. B. Dang, K. Iino, and E. Hihara, “Study on two-phase flow pattern of supercritical carbon dioxide with entrained PAG-type lubricating oil in a gas cooler,” Int. J. Refrigeration, vol. 31, no. 7, pp. 1265–1272, 2008.
   Web of Science ®Google Scholar
• C. B. Dang, K. Hoshika, and E. Hihara, “Effect of lubricating oil on the flow and heat-transfer characteristics of supercritical carbon dioxide,” Int. J. Refrigeration, vol. 35, no. 5, pp. 1410–1417, 2012.
   Web of Science ®Google Scholar
• X. M. Zhao, and P. Bansal, “Critical review of flow boiling heat transfer of CO2–lubricant mixtures,” Int. J. Heat Mass Transf., vol. 52, no. 3–4, pp. 870–879, 2009.
   Web of Science ®Google Scholar
• M. X. Li, C. B. Dang, and E. Hihara, “Flow boiling heat transfer of carbon dioxide with PAG-type lubricating oil in pre-dryout region inside horizontal tube,” Int. J. Refrigeration, vol. 41, pp. 45–59, 2014.
   Web of Science ®Google Scholar
• J. R. Thome, “Comprehensive thermodynamic approach to modeling refrigerant–lubricating oil mixtures,” HVAC&R Res., vol. 1, no. 2, pp. 110–125, 1995.
   Google Scholar
• C. R. Zhao, P. X. Jiang, and Y. W. Zhang, “Flow and convection heat transfer characteristics of CO2 mixed with lubricating oil at supercritical pressures in small tube during cooling,” Int. J. Refrigeration, vol. 34, no. 1, pp. 29–39, 2011.
   Web of Science ®Google Scholar
• C. R. Zhao, and P. X. Jiang, “Predictions of in-tube cooling pressure drops for CO2 mixed with lubricating oil at supercritical pressures,” Appl. Therm. Eng., vol. 73, no. 1, pp. 527–536, 2014.
   Web of Science ®Google Scholar
• Y. A. Çengel, and A. J. Ghajar, Heat and Mass Transfer: Fundamentals and Applications, 5th ed, New York: McGraw-Hill, 2015.
   Google Scholar
• J. Y. Jung, and R. Yun, “Prediction of gas cooling heat transfer coefficients for CO2-oil mixtures,” Int. J. Refrigeration, vol. 36, no. 1, pp. 129–135, 2013.
   Web of Science ®Google Scholar
• C. B. Dang, K. Hoshika, and E. Hihara, “Predicting the cooling heat transfer coefficient of supercritical CO2 with a small amount of entrained lubricating oil by using the neural network method,” Int. J. Refrigeration, vol. 35, no. 4, pp. 1130–1138, 2012.
   Web of Science ®Google Scholar
• A. Hauk, and E. Weidner, “Thermodynamic and fluid-dynamic properties of carbon dioxide with different lubricants in cooling circuits for automobile,” Ind. Eng. Chem. Res., vol. 39, no. 12, pp. 4646–4651, 2000.
   Web of Science ®Google Scholar
• ASHRAE Standard 41.4-1996 (RA 2006), Standard Method for Measurement of Proportion of Lubricant in Liquid Refrigerant, Atlanta, GA, USA: ASHRAE, 2006.
   Google Scholar
• S. M. Liao, and T. S. Zhao, “Measurements of heat transfer coefficients from super-critical carbon dioxide flowing in horizontal mini/micro channels,” J. Heat Transf., vol. 124, no. 3, pp. 413–420, 2002.
   Web of Science ®Google Scholar
• Y. Parlatan, N. E. Todreas, and M. J. Driscoll, “Buoyancy and property variation effected in turbulent mixed convection of water in vertical tubes,” J. Heat Transf., vol. 118, pp. 381–387, 1996.
   Web of Science ®Google Scholar
• M. R. Conde, “Estimation of thermophysical properties of lubricating oils and their solutions with refrigerants: An appraisal of existing methods,” Appl. Therm. Eng., vol. 16, no. 1, pp. 51–61, 1996.
   Web of Science ®Google Scholar
• E. P. Bandarra Filho, L. X. Cheng, and J. R. Thome, “Flow boiling characteristics and flow pattern visualization of refrigerant/lubricant oil mixtures,” Int. J. Refrigeration, vol. 32, no. 2, pp. 185–202, 2009.
   Web of Science ®Google Scholar
• W. J. Wei, G. L. Ding, H. T. Hu, and K. J. Wang, “Models of thermodynamic and transport properties of POE VG68 and R410 A/POE VG68 mixture,” Front. Energy Power Eng. China, vol. 2, no. 2, pp. 227–234, 2008.
   Google Scholar
• S. Feja, and C. Hanzelmann, “Experimental studies of thermodynamic properties of R744-oil-mixtures up to 140°C and 150 bar,” Int. J. Refrigeration, vol. 60, pp. 135–141, 2015.
   Web of Science ®Google Scholar
• J. J. Baustian, M. B. Pate, and A. E. Bergles, “Properties of oil refrigerant liquid mixtures with applications to oil concentration measurement: part 1—Thermophysical and transport properties,” ASHRAE Trans., vol. 92, no. 1, pp. 55–73, 1986.
   Google Scholar
• J. R. Thome, Engineering Data Book III. Decatur, AL, USA, Wolverine Tube Inc. http://www.wlv.com/products/databook/db3/DataBookIII.pdf, Chapters 15 and 16, 2004.
   Google Scholar
• L. A. Robbins, and C. L. Kingrea, “Estimates of thermal conductivity,” Hydrocarbon Process. Petrol Ref., vol. 41, no. 5, pp. 133–139, 1962.
   Google Scholar
• P. E. Liley, and W. R. Gambill, “Physical and chemical data,” in Chemical Engineering Handbook, fifth edition, C. Perry (Ed.), Mc Graw-Hill, New York, 1973.
   Google Scholar
• M. K. Jensen, and D. L. Jackman, “Prediction of nucleate pool boiling heat transfer coefficients of refrigerant–oil mixtures,” J. Heat Transf., vol. 106, no. 1, pp. 184–190, 1984.
   Web of Science ®Google Scholar