Effect of Manufacturing Tolerances on the Cooling Performance of Internal Rib Turbulated Passages

References

• J. C. Han, “Recent studies in turbine blade cooling,” Int. J. Rotating Mach., vol. 10, no. 6, pp. 443–457, 2004.
   Google Scholar
• R. J. Goldstein, “Film cooling,” Adv.Heat Transfer, vol. 7, pp. 321–379, 1971. DOI: 10.1016/S0065-2717(08)70020-0.
   Google Scholar
• J. C. Han, L. R. Glicksman, and W. M. Rohsenow, “An investigation of heat transfer and friction for rib-roughened surfaces,” Int. J. Heat Mass Transfer, vol. 21, no. 8, pp. 1143–1156, 1978. DOI: 10.1016/0017-9310(78)90113-8.
   Web of Science ®Google Scholar
• P. R. Chandra, C. R. Alexander, and J. C. Han, “Heat transfer and friction behaviors in rectangular channels with varying number of ribbed walls,” Int. J. Heat Mass Transfer, vol. 46, no. 3, pp. 481–495, 2003. DOI: 10.1016/S0017-9310(02)00297-1.
   Web of Science ®Google Scholar
• P. Heidrich, J. V. Wolfersdorf, and M. Schnieder, “Experimental study of heat transfer in gas turbine blades using a transient inverse technique,” Heat Transfer Eng., vol. 30, no. 13, pp. 1077–1086. 2009. DOI: 10.1080/01457630902922236.
   Web of Science ®Google Scholar
• S. Mochizuki, A Murata, and M. Fukunaga, “Effects of rib arrangements on pressure drop and heat transfer in a rib-roughened channel with a sharp 180 deg turn,” J. Turbomach., vol. 119, no. 3, pp. 610–616, 1997. DOI: 10.1115/1.2841165.
   Web of Science ®Google Scholar
• O. Yemenici, and H. Umur, “Experimental aspects of heat transfer enhancement over various flow surfaces,” Heat Transfer Eng., vol. 37, no. 5, pp. 435–442. 2016. DOI: 10.1080/01457632.2015.1057449.
   Web of Science ®Google Scholar
• S. W. Chag, T. L. Yang, and W. J. Wang, “Heat transfer in a rotating twin-pass trapezoidal-sectioned passage roughened by skewed ribs on two opposite walls,” Heat Transfer Eng., vol. 27, no. 10, pp. 63–79. 2006. DOI: 10.1080/01457630600908602.
   Web of Science ®Google Scholar
• T. M. Liou, M. Y. Chen, and M. H. Tsai, “Fluid flow and heat transfer in a rotating two-pass square duct with in-line 90-deg ribs,” J. Turbomach., vol. 124, no. 2, pp. 260–268, 2002. DOI: 10.1115/1.1459079.
   Web of Science ®Google Scholar
• K. M. Kim, Y. Y. Kim, D. H. Lee, D. H. Rhee, and H. H. Cho, “Local heat/mass transfer phenomena in rotating passage, part 2: angled ribbed passage,” J. Thermophys. Heat Transfer, vol. 20, no. 2, pp. 199–210, 2006. DOI: 10.2514/1.14912.
   Web of Science ®Google Scholar
• H. H. Cho, S. J. Wu, and H. J. Kwon, “Local heat/mass transfer measurements in a rectangular duct with discrete ribs,” J. Turbomach., vol. 122, no. 3, pp. 579–586, 2000. DOI: 10.1115/1.1303049.
   Web of Science ®Google Scholar
• D. H. Lee, D. H. Rhee, K. M. Kim, H. H. Cho, and H. K. Moon, “Detailed measurement of heat/mass transfer with continuous and multiple v-shaped ribs in rectangular channel,” Energy, vol. 34, no. 11, pp. 1770–1778, 2009. DOI: 10.1016/j.energy.2009.07.011.
   Web of Science ®Google Scholar
• L. Al-Hadhrami, T. Griffith, and J. C. Han, “Heat transfer in two-pass rotating rectangular channels (ar = 2) with five different orientations of 45 deg v-shaped rib turbulators,” J. Heat Transfer, vol. 125, no. 2, pp. 232–242, 2003. DOI: 10.1115/1.1561455.
   Web of Science ®Google Scholar
• L. M. Wright, W. L. Fu, and J. C. Han, “Thermal performance of angled, v-shaped, and w-shaped rib turbulators in rotating rectangular cooling channels (AR = 4:1),” J. Turbomach., vol. 126, no. 4, pp. 604–614, 2004. DOI: 10.1115/1.1791286.
   Web of Science ®Google Scholar
• H. Chung, J. S. Park, S. Park, S. M. Choi, D. H. Rhee, and H. H. Cho, “Augmented heat transfer with intersecting rib in rectangular channels having different aspect ratios,” Int. J. Heat Mass Transfer, vol. 88, pp. 357–367, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.04.033.
   Web of Science ®Google Scholar
• R. L. Webb, E. R. G. Eckert, and R. J. Goldstein, “Heat transfer and friction in tubes with repeated-rib roughness,” Int. J. Heat Mass Transfer, vol. 14, no. 4, pp. 601–617, 1971. DOI: 10.1016/0017-9310(71)90009-3.
   Web of Science ®Google Scholar
• J. C. Han, and J. S. Park, “Developing heat transfer in rectangular channels with rib turbulators,” Int. J. Heat Mass Transfer, vol. 31, no. 1, pp. 183–195, 1988. DOI: 10.1016/0017-9310(88)90235-9.
   Web of Science ®Google Scholar
• P. R. Chandra, M. E. Niland, and J. C. Han, “Turbulent flow heat transfer and friction in a rectangular channel with varying numbers of ribbed walls,” J. Turbomach., vol. 119, no. 2, pp. 374–380, 1997. DOI: 10.1115/1.2841121.
   Web of Science ®Google Scholar
• K. M. Kim, H. Lee, B. S. Kim, S. Shin, D. H. Lee, and H. H. Cho, “Optimal design of angled rib turbulators in a cooling channel,” Heat Mass Transf., vol. 45, no. 12, pp. 1617–1625, 2009. DOI: 10.1007/s00231-009-0536-3.
   Web of Science ®Google Scholar
• K. M. Kim, B. S. Kim, D. H. Lee, H. Moon, and H. H. Cho, “Optimal design of transverse ribs in tubes for thermal performance enhancement,” Energy, vol. 35, no. 6, pp. 2400–2406, 2010. DOI: 10.1016/j.energy.2010.02.020.
   Web of Science ®Google Scholar
• Y.-T. Yang, and P.-J. Chen, “Numerical optimization of turbulent flow and heat transfer characteristics in a ribbed channel,” Heat Transfer Eng., vol. 36, no. 3, pp. 290–302, 2015. DOI: 10.1080/01457632.2014.916158.
   Web of Science ®Google Scholar
• R. S. Bunker, “The effects of manufacturing tolerances on gas turbine cooling,” J. Turbomach., vol. 131, no. 4, pp. 1–11, 2009. DOI: 10.1115/1.3072494.
   Web of Science ®Google Scholar
• J. C. Han, and L. M. Wright, “4.2.2.2 Enhanced Internal Cooling of Turbine Blades and Vanes,” in The Gas Turbine Handbook, R. Dennis, Ed. Morgantown, WV: National Energy Technology Laboratory, 2006, pp. 321–354.
   Google Scholar
• D. G. Bogard, and K. A. Thole, “Gas turbine film cooling,” J. Propul. Power, vol. 22, no. 2, pp. 249–270, 2006. DOI: 10.2514/1.18034.
   Web of Science ®Google Scholar
• S. J. Wu, “A Study on Heat Transfer and Pressure Drop Characteristics in a Rib-Roughened Rectangular Duct,” Master's thesis, Yonsei University, Korea, 1998.
   Google Scholar
• S. J. Kline, and F. A. McClintock, “Describing uncertainty in single-sample experiments,” Mechan. Eng., vol. 75, no. 1, pp. 3–8, 1953.
   Google Scholar
• F. W. Dittus, and L. M. K. Boelter, “Heat transfer in automobile radiators of the tubular type, publications in engineering,” University of California, Berkeley, Vol. 2, p. 443, 1930.
   Google Scholar