References
- A. Ashwood, and D. Bharathan, Hybrid Cooling Systems for Low-Temperature Geothermal Power Production, 1st ed. Golden, CO, USA: National Renewable Energy Laboratory, 2011.
- D. G. Kröger, Air-Cooled Heat Exchangers and Cooling Towers, 1st ed. Tulsa, OK, USA: Pennwell Corp, 2011.
- Z. Zou, Z. Guan, and H. Gurgenci, “Optimization design of solar enhanced natural draft dry cooling tower,” Energ. Convers. Manage., vol. 76, pp. 945–955, 2013. DOI: 10.1016/j.enconman.2013.08.053.
- T. S. Rao, T. N. Sairam, B. Viswanathan, and KVK Nair, “Carbon steel corrosion by iron oxidising and sulphate reducing bacteria in a freshwater cooling system,” Corros. Sci., vol. 42, no. 8, pp. 1417–1431, 2000. DOI: 10.1016/S0010-938X(99)00141-9.
- M. D. Dolan, and D. G. Roberts, Hybrid Solar-Fossil Systems for Large-Scale Solar Energy Storage, Adelaide, Australia, 2013.
- N. Abuaf, and F. W. Staub, Drying of Liquid-Solid Slurry Droplets, General Electric, Niskayuna, NY, USA: Corporate Research and Development, 1985.
- T. Elperin, and B. Krasovitov, “Evaporation of liquid droplets containing small solid particles,” Int. J. Heat Mass Transfer, vol. 38, no. 12, pp. 2259–2267, 1995. DOI: 10.1016/0017-9310(94)00337-U.
- N. Dalmaz, H. O. Ozbelge, A. N. Eraslan, and Y. Uludag, “Heat and mass transfer mechanisms in drying of a suspension droplet: A new computational model,” Dry. Technol., vol. 25, no. 2, pp. 391–400, 2007. DOI: 10.1080/07373930601184569.
- M. Farid, “A new approach to modelling of single droplet drying,” Chem. Eng. Sci., vol. 58, no. 13, pp. 2985–2993, 2003. DOI: 10.1016/S0009-2509(03)00161-1.
- M. Mezhericher, A. Levy, and I. Borde, “Theoretical drying model of single droplets containing insoluble or dissolved solids,” Dry. Technol., vol. 25, no. 6, pp. 1025–1032, 2007. DOI: 10.1080/07373930701394902.
- M. Mezhericher, A. Levy, and I. Borde, “Heat and mass transfer of single droplet/wet particle drying,” Chem. Eng. Sci., vol. 63, no. 1, pp. 12–23, 2008. DOI: 10.1016/j.ces.2007.08.052.
- S. Nešić, and J. Vodnik, “Kinetics of droplet evaporation,” Chem. Eng. Sci., vol. 46, no. 2, pp. 527–537, 1991. DOI: 10.1016/0009-2509(91)80013-O.
- M. Mezhericher, A. Levy, and I. Borde, “Modelling the morphological evolution of nanosuspension droplet in constant-rate drying stage,” Chem. Eng. Sci., vol. 66, no. 5, pp. 884–896, 2011. DOI: 10.1016/j.ces.2010.11.028.
- W. E. Ranz, and W. R. Marshall, “Evaporation from drops,” Chem. Eng. Prog., vol. 48, no. 3, pp. 141–146, 1952.
- D. H. Charlesworth, and W. R. Marshall, “Evaporation from drops containing dissolved solids,” AIChE J., vol. 6, no. 1, pp. 9–23, 1960. DOI: 10.1002/aic.690060104.
- M. H. Sadafi, I. Jahn, A. B. Stilgoe, and K. Hooman, “Theoretical and experimental studies on a solid containing water droplet,” Int. J. Heat Mass Transfer, vol. 78, no. 1, pp. 25–33, 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.06.064.
- M. H. Sadafi, I. Jahn, A. B. Stilgoe, and K. Hooman, “A theoretical model with experimental verification for heat and mass transfer of saline water droplets,” Int. J. Heat Mass Transfer, vol. 81, pp. 1–9, 2015. DOI: 10.1016/j.ijheatmasstransfer.2014.10.005.
- M. H. Sadafi, I. Jahn, and K. Hooman, “Cooling performance of solid containing water for spray assisted dry cooling towers,” Energ. Convers. Manage., vol. 91, pp. 158–167, 2015. DOI: 10.1016/j.enconman.2014.12.005.
- A. Bahadori, M. Clark, and B. Boyd, Essentials of Water Systems Design in the Oil, Gas, and Chemical Processing Industries, New York, NY, USA: Springer Briefs in Applied Sciences and Technology, 2013.
- T. Ohwaki, W. Urushihara, J. Kinugasa, and K. Noishiki, “Aluminum alloy material having an excellent sea water corrosion resistance and plate heat exchanger,” Google Patents, 2014.
- N. Fu, M. W. Woo, and X. D. Chen, “Colloidal transport phenomena of milk components during convective droplet drying,” Colloids Surf. B, vol. 87, no. 2, pp. 255–266, 2011. DOI: 10.1016/j.colsurfb.2011.05.026.
- S. X. Qi Lin, and X. D. Chen, “Improving the glass-filament method for accurate measurement of drying kinetics of liquid droplets,” Chem. Eng. Res. Des., vol. 80, no. 4, pp. 401–410, 2002. DOI: 10.1205/026387602317446443.
- M. H. Sadafi, et al., “On the influence of low-power laser source on the evaporation of single droplets: Experimental and numerical approaches,” J. Appl. Fluid Mech., vol. 9, no. 1, pp. 81–87, 2016.
- A. M. Al-Amiri, M. A. Chaker, M. M. Zamzam, and C. B. Meher-Homji, “Application of inlet fogging for power augmentation of mechanical drive turbines in the oil and gas sector,” Proceedings of the ASME Turbo Expo, pp. 8–11, Barcelona, Spain, May 8, 2006.
- G. P. Wachtell, Atomized Water Injection to Improve Dry Cooling Tower Performance, Philadelphia, PA, USA: Franklin Institute Research Labs, 1974.
- A. M. Rubin, “Demonstration of adiabatic cooling to improve the performance of air-cooled heat exchangers,” NASA STI/Recon Technical Report No. COO-2673-1, Philadelphia, PA, USA: Franklin Institute, 1975.
- G. Branfield, “Precooling of fin-tube heat exchanger inlet air using ultra fine water spray,” B. Ing thesis, University of Stellenbosch, Stellenbosch, South Africa, 2003.
- A. Alkhedhair, et al., “Numerical simulation of water spray in natural draft dry cooling towers with a new nozzle representation approach,” Appl. Therm. Eng., vol. 98, pp. 924–935, 2016. DOI: 10.1016/j.applthermaleng.2015.10.118.
- M. H. Sadafi, et al., “An investigation on spray cooling using saline water with experimental verification,” Energy Convers. Manage., vol. 108, pp. 336–347, 2016. DOI: 10.1016/j.enconman.2015.11.025.
- M. H. Sadafi, I. Jahn, A. B. Stilgoe, and K. Hooman, “An investigation of evaporation from single saline water droplets: experimental and theoretical approaches,” 19th Australasian Fluid Mechanics Conference, Melbourne, Australia, 2014.
- B. Kuźnicka, “Erosion–corrosion of heat exchanger tubes,” Eng. Fail. Anal., vol. 16, no. 7, pp. 2382–2387, 2009. DOI: 10.1016/j.engfailanal.2009.03.026.
- G. Kronenberg, and F. Lokiec, “Low-temperature distillation processes in single-and dual-purpose plants,” Desalination, vol. 136, no. 1, pp. 189–197, 2001. DOI: 10.1016/S0011-9164(01)00181-3.
- R. Rao, and V. Patel, “Optimization of mechanical draft counter flow wet-cooling tower using artificial bee colony algorithm,” Energy Convers. Manage., vol. 52, no. 7, pp. 2611–2622, 2011. DOI: 10.1016/j.enconman.2011.02.010.
- M. H. Sadafi, I. Jahn, and K. Hooman, “Nozzle arrangement effect on cooling performance of saline water spray cooling,” Appl. Therm. Eng., vol. 105, pp. 1061–1066, 2016. DOI: 10.1016/j.applthermaleng.2016.01.078.
- A. S. Kaiser, M. Lucas, A. Viedma, and B. Zamora, “Numerical model of evaporative cooling processes in a new type of cooling tower,” Int. J. Heat Mass Transfer, vol. 48, no. 5, pp. 986–999, 2005. DOI: 10.1016/j.ijheatmasstransfer.2004.09.047.
- M. H. Sadafi, J. Ruiz, M. Lucas, I. Jahn, and K. Hooman, “Numerical and experimental study on a single cone saline water spray in a wind tunnel,” Int. J. Therm. Sci., vol. 120, pp. 190–202, 2017. DOI: 10.1016/j.ijthermalsci.2017.06.011.
- F. S. Anuar, M. Malayeri, and K. Hooman, “Particulate fouling and challenges of metal foam heat exchangers,” Heat Transfer Eng., vol. 38, no. 7–8, pp. 730–742, 2017. DOI: 10.1080/01457632.2016.1206415.
- Y. Lu, Z. Guan, K. Hooman, and P. S. Parulekar, “An investigation on cooling performance of air-cooled heat exchangers used in coal seam gas production,” Heat Transfer Eng., vol. 38, no. 11–12, pp. 1073–1088, 2017. DOI: 10.1080/01457632.2016.1217039.
- K. Hooman, “Theoretical prediction with numerical and experimental verification to predict crosswind effects on the performance of cooling towers,” Heat Transfer Eng., vol. 36, no. 5, pp. 480–487, 2015. DOI: 10.1080/01457632.2014.935223.