Experimental and Numerical Investigation of Effusion Cooling Performance Over Combustor Liner Flat Plate Model

References

• A. H. Lefebvre, Gas Turbine Combustion, 2nd ed. Boca Raton, FL, USA: Taylor and Francis, 1999.
   Google Scholar
• B. Facchini, L. Tarchi, L. Toni, and A. Ceccherini, “Adiabatic and overall effectiveness measurements of an effusion cooling array for turbine end wall application,” J. Turbomachinery., vol. 132, no. 4, pp. 041008-1–041008-11, 2010. DOI: 10.1115/1.3213555.
   Web of Science ®Google Scholar
• A. Andreini, G. Caciolli, B. Facchini, and L. Tarchi, “Experimental evaluation of the density ratio effects on the cooling performance of a combined slot/effusion combustor cooling system,” ISRN Aerospace Engineering, London, United Kingdom: Hindawi Publishing Corporation, vol. 2013, Article ID 423190, pp. 1–14, 2013. DOI: 10.1155/2013/423190.
   Google Scholar
• C. Zhang, B. Song, Y. Lin, Q. Xu, and G. Liu, “Cooling effectiveness of effusion walls with deflection hole angles measured by infrared imaging,” Appl. Therm. Eng., vol. 29, no. 5–6, pp. 966–972, 2009. DOI: 10.1016/j.applthermaleng.2008.05.011.
   Web of Science ®Google Scholar
• L. Andrei et al., “Effusion cooling plates for combustor liners: experimental and numerical investigations on the effect of density ratio,” Energy Procedia., vol. 45, pp. 1402–1411, 2014. DOI: 10.1016/j.egypro.2014.01.147.
   Google Scholar
• A. Andreini, B. Facchini, A. Picchi, L. Tarchi, and F. Turrini, “Experimental and theoretical investigation of thermal effectiveness in multiperforated plates for combustor liner effusion cooling,” J. Turbomachinery., vol. 136, no. 9, pp. 091003-1–091003-13, 2014. DOI: 10.1115/1.4026846.
   Web of Science ®Google Scholar
• G. Cerri, A. Giovannelli, L. Battisti, and R. Fedrizzi, “Advances in effusive cooling techniques of gas turbines,” Appl. Therm. Eng., vol. 27, no. 4, pp. 692–698, 2007. DOI: 10.1016/j.applthermaleng.2006.10.012.
   Web of Science ®Google Scholar
• R. Krewinkel, “A review of gas turbine effusion cooling studies,” Int. J. Heat and Mass Transfer., vol. 66, pp. 706–722, November 2013. DOI: 10.1016/j.ijheatmasstransfer.2013.07.071.
   Web of Science ®Google Scholar
• L. Arcangeli, B. Facchini, M. Surace, and L. Tarchi, “Correlative analysis of effusion cooling systems,” J. Turbomachinery., vol. 130, no. 1, pp. 011016-1–011016-7, 2008. DOI: 10.1115/1.2749298.
   Web of Science ®Google Scholar
• L. Tarchi, B. Facchini, F. Maiuolo, and D. Coutandin, “Experimental investigation on the effects of a large recirculating area on the performance of an effusion cooled combustor liner,” J. Eng. Gas Turbines Power., vol. 134, no. 4, pp. 041505-1–041505-9, 2012. DOI: 10.1115/1.4004729.
   Web of Science ®Google Scholar
• C. Yang and J. Zhang, “Influence of multi-hole arrangement on cooling film development,” Chin. J. Aeronaut., vol. 25, no. 2, pp. 182–188, 2012. DOI: 10.1016/S1000-9361(11)60377-4.
   Web of Science ®Google Scholar
• L. Yiping, E. Esposito, and S. V. Ekkad, “Predictions of flow and heat transfer in low emission combustors,” Heat Transfer Eng., vol. 29, no. 4, pp. 375–384, 2008. DOI: 10.1080/01457630701825515.
   Web of Science ®Google Scholar
• Y.-B. Xiong, Y.-H. Zhu, and P.-X. Jiang, “Numerical simulation of transpiration cooling for sintered metal porous strut of the scramjet combustion chamber,” Heat Transfer Eng., vol. 35, no. 6–8, pp. 721–729, 2014. DOI: 10.1080/01457632.2013.837790.
   Web of Science ®Google Scholar
• F. Bataille, A. Lallemand, and J. Bellettre, “Experimental investigation of the mixing between hot and cold gas in two cooling processes,” Heat Transfer Eng., vol. 25, no. 2, pp. 24–29, 2004. DOI: 10.1080/01457630490276060.
   Web of Science ®Google Scholar
• G. Arroyo-Callejo, E. Laroche, P. Millan, F. Leglaye, and F. Chedevergne, “Numerical investigation of compound angle effusion cooling using differential reynolds stress model and zonal detached eddy simulation approaches,” J. Turbomachinery., vol. 138, no. 10, pp. 101001-1–101001-11, Oct 2016.
   Web of Science ®Google Scholar
• J. P. Holman, Experimental Methods For Engineers. 6th ed., New York, FL, USA: Mcgraw Hill Inc, 1994.
   Google Scholar