References
- J. C. Pacio, and C. A. Dorao, “A review on heat exchanger thermal hydraulic models for cryogenic applications,” Cryogenics, vol. 51, no. 7, pp. 366–379, 2011.
- P. K. Das, and I. Ghosh, “Thermal design of multistream plate fin heat exchanger-a state of the art review,” Heat Transfer Engineering, vol. 33, no. 4–5, pp. 284–300, 2012.
- M. Goyal, A. Chakravarty, and M. D. Atrey, “Two dimensional model for multistream plate fin heat exchangers,” Cryogenics, vol. 61, pp. 70–78, 2014.
- M. Goyal, A. Chakravarty, and M. D. Atrey, “Experimental investigations and validation of two dimensional model for multistream plate fin heat exchangers,” Cryogenics, vol. 82, pp. 83–91, 2017.
- N. A. Ansari et al., Development of helium refrigeration/liquefaction system at BARC, India, in: 26th International Cryogenic Engineering Conference & International Cryogenic Materials Conference 2016, 7–11 March 2016, New Delhi, India, IOP Conf. Series: Materials science and engineering, 171/1/012007, 2017.
- HEPAK®, version 3.40/3.41, Horizon Technologies, March 2005 Available: http://www.htess.com. Accessed 6 September, 2017.
- NIST Cryogenics Technologies Group, Material Properties, Available: www.cryogenics.nist.gov/MPropsMAY/materialproperties.htm. [Accessed Sept. 6, 2017].
- R. M. Manglik, and A. E. Bergles, “Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchanger,” Experimental Thermal and Fluid Science, vol. 10, no. 2, pp. 171–180, 1995.
- American Society of Mechanical Engineers ASME Boiler and Pressure Vessel Code, Section VIII, Rules for Construction of Pressure Vessels, Division 1, and, ASME, New York, 2015.
- The brazed aluminium plate‐fin heat exchanger manufacturers’ association The Standards of the Brazed Aluminium Plate-Fin Heat Exchanger Manufacturers' Association, and, 3rd ed., ALPEMA, 2010. Available: http://www.alpema.org. Accessed 6 September, 2017.
- American Society of Mechanical Engineers. ASME Boiler and Pressure Vessel Code, Section II, Materials, and, ASME, New York, 2015.
- American Society of Mechanical Engineers. ASME Boiler and Pressure Vessel Code, Section V, Nondestructive Examination, and, ASME, New York, 2015.
- American Society of Mechanical Engineers. ASME Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications, and, ASME, New York, 2015.
- R. P. Benedict, Fundamentals of Pipe Flow, and, John Wiley and Sons, New York, 1980.
- F. P. Incropera, D. P. DeWitt, T. L. Bergman, and A. S. Lavine. Fundamentals of Heat and Mass Transfer. New York: John Wiley and Sons Inc, 2007.
- W. M. Kays, and A. L. London. Compact Heat Exchangers, and, 3rd ed. New York: McGraw-Hill Book Company, 1984.
- R. K. Shah, and D. Sekulic, P. Fundamentals of Heat Exchanger Design. New Jersey: John Wiley & Sons, Inc., 2003.
- M. A. Taylor, Plate Fin Heat Exchangers: guide to Their Specification and Use. Oxon, UK: HTFS Harwell Laboratory, 1990.
- F. M. White, Fluid Mechanics. New York: McGraw-Hill Book Company, 1998.
- R. J. Moffat, “Describing the uncertainties in experimental results,” Experimental Thermal and Fluid Science, Experimental Thermal and Fluid Science, vol. 1, no. 1, pp. 3–17, 1988.
- AspenTech Aspen MUSE™, version 2004.1, AspenTech India Pvt. Ltd.