Heat Loss Via Concrete Slab Floors With External Vertical Edge Insulations

References

• M. Deru, A Model for Ground-coupled Heat and Moisture Transfer from Buildings. Golden, Colorado, USA: National Renewable Energy Laboratory Report, NREL/TP-550-33954, 2003.
   Google Scholar
• J. Neymark et al., International Energy Agency Building Energy Simulation Test and Diagnostic Method (IEA BESTEST) In-Depth Diagnostic Cases for Ground Coupled Heat Transfer Related to Slab-on-Grade Construction. Golden, Colorado, USA: National Renewable Energy Laboratory report NREL/TP-550-43388, 2008.
   Google Scholar
• G. P. Mitalas, Basement Heat Loss Studies at DBR/NRC, DBR Paper No 1045, Ottawa, Canada: National Research Council Canada, 1982.
   Google Scholar
• G. P. Mitalas, “Calculation of below-grade residential heat loss: Low rise residential building,” ASHRAE Trans., vol. 93, no. 1, pp. 743–783, 1987.
   Google Scholar
• M. Krarti and S. Choi, “Simplified method for foundation heat loss calculation,” ASHRAE Trans., vol. 102, no. 1, pp. 140–152, 1996.
   Google Scholar
• I. Beausoleil-Morrison and G. Mitalas, “BASESIMP: a residential-foundation heat-loss algorithm for incorporating into whole-building energy-analysis programs,” Proc. Building Simulation ‘97. Prague, Czech Republic: International Building Performance Simulation Association, Sept. 8-10, 1997.
   Google Scholar
• ASHRAE Handbook, Fundamentals. Atlanta, Georgia, USA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., 2009.
   Google Scholar
• M. Krarti, D. E. Claridge, and J. F. Kreider, “The ITPE technique applied to steady-state ground-coupled problems,” Int. J. Heat Mass Transf., vol. 31, no. 9, pp. 1885–1898, 1988.
   Web of Science ®Google Scholar
• M. Krarti, P. Chuangchid, and P. Ihm, “Foundation heat transfer Module for EnergyPlus Program,” Proceedings of the Seventh International IBPSA Conference, Rio de Janeiro, Brazil, Aug. 13–15, 2001.
   Google Scholar
• S. Zoras, M. Davies, and M. H. Adjali, “A novel tool for the prediction of earth-contact heat transfer: a multi-room simulation,” Proc. Inst. Mech. Eng. Part C J. Mech. Eng., vol. 215, no. 4, pp. 1–8, 2001.
   Web of Science ®Google Scholar
• S. Zoras, M. Davies, and L. Wrobel, “Earth-contact heat transfer: improvement and application of a novel simulation technique,” Energy Build., vol. 34, no. 4, pp. 333–344, 2002.
   Web of Science ®Google Scholar
• X. N. Xie, Y. Jiang, and J. J. Xia, “A new approach to compute heat transfer of ground-coupled envelope in building thermal simulation software,” Energy Build., vol. 40, no. 4, pp. 476–485, 2008.
   Web of Science ®Google Scholar
• S. J. Rees, and D. Fan, “A numerical implementation of the dynamic thermal network method for long time series simulation of conduction in multi-dimensional non-homogeneous solids,” Int. J. Heat Mass Transf., vol. 61, no. 1, pp. 475–489, 2013.
   Google Scholar
• H. H. Macey, “Heat loss through a solid floor,” J. Inst. Fuel, vol. 22, no. 10, pp. 369–371, 1949.
   Google Scholar
• J. K. Latta, and G. G. Boileau, “Heat loss from house basements,” Can. Build., vol. 19, no. 10, pp. 39–42, 1969.
   Google Scholar
• R. W. R. Muncey, and J. W. Spencer, “Heat flow into the ground under a house,” in Energy Conservation in Heating, Cooling and Ventilating Building, vol. 2. Washington, DC: Hemisphere Publishing, 1978, pp. 646–660.
   Google Scholar
• A. E. Delsante, A. N. Stokes, and P. J. Walsh, “Application of fourier transforms to periodic heat flow into the ground under a building,” Int. J. Heat Mass Transf., vol. 26, no. 1, pp. 121–132, 1983.
   Web of Science ®Google Scholar
• T. Kusuda, O. Plet, and J. W. Bean, “Annual variation of temperature field and heat transfer under heated ground surfaces: slab-on-grade floor heat loss calculations,” in Proceedings of Thermal Performance of the Exterior Envelopes of Whole Buildings II International Conference, Published by American Society of Heating, Refrigerating and Air-Conditioning Engineers, Atlanta, Georgia, USA, pp. 67–94, 1983.
   Google Scholar
• K. A. Landman, and A. E. Delsante, “Steady-state heat losses from a building floor slab with vertical edge insulation—I,” Build. Environ., vol. 21, no. 3–4, pp. 177–182, 1986.
   Web of Science ®Google Scholar
• K. A. Landman, and A. E. Delsante, “Steady-state heat losses from a building floor slab with vertical edge insulation—II,” Build. Environ., vol. 22, no. 1, pp. 49–55, 1987.
   Web of Science ®Google Scholar
• C. E. Hagentoft, “Temperature under a house with variable insulation,” Build. Environ., vol. 23, no. 3, pp. 225–231, 1988.
   Web of Science ®Google Scholar
• M. Krarti, “Steady-state heat transfer beneath partially insulated slab-on-grade floor,” Int. J. Heat Mass Transf., vol. 32, no. 5, pp. 961–969, 1989.
   Web of Science ®Google Scholar
• A. E. Delsante, “Steady-state losses from the core and perimeter regions of a slab-on-ground floor,” Build. Environ., vol. 24, no. 3, pp. 253–257, 1989.
   Web of Science ®Google Scholar
• A. E. Delsante, “A comparison between measured and calculated heat losses through a slab-on-ground floor,” Build. Environ., vol. 25, no. 1, pp. 25–31, 1990.
   Web of Science ®Google Scholar
• B. R. Anderson, “Calculation of the steady-state heat transfer through a slab-on-ground floor,” Build. Environ., vol. 26, no. 4, pp. 405–415, 1991.
   Web of Science ®Google Scholar
• J. Claesson and C. E. Hagentoft, “Heat loss to the ground from a building – I. General theory,” Build. Environ., vol. 26, no. 2, pp. 195–208, 1991.
   Web of Science ®Google Scholar
• M. Krarti, “Steady-state heat transfer from slab-on-grade floors with vertical insulation,” Int. J. Heat Mass Transf., vol. 36, no. 8, pp. 2147–2155, 1993.
   Web of Science ®Google Scholar
• B. R. Anderson, “The effect of edge insulation on the steady-state heat loss through a slab-on-ground floor,” Build. Environ., vol. 28, no. 3, pp. 361–367, 1993.
   Web of Science ®Google Scholar
• M. G. Davies, “Heat loss from a solid ground floor,” Build. Environ., vol. 28, no. 3, pp. 347–359, 1993.
   Web of Science ®Google Scholar
• M. Krarti, J. F. Kreider, and D. E. Claridge, “Schwarz-Christoffel transformation applied to steady-state ground-coupled problems,” Energy Build., vol. 20, no. 3, pp. 193–203, 1994.
   Web of Science ®Google Scholar
• M. Krarti, “Time-varying heat transfer from slab-on-grade floors with vertical insulation,” Build. Environ., vol. 29, no. 1, pp. 55–61, 1994.
   Web of Science ®Google Scholar
• C. E. Hagentoft, “Heat losses and temperature in the ground under a building with and without ground water flow-I. Infinite ground water flow rate,” Build. Environ., vol. 31, no. 1, pp. 3–11, 1996.
   Web of Science ®Google Scholar
• M. F. Tang, and Q. G. Chen, “Thermal analysis of ground floor,” Build. Environ., vol. 33, no. 6, pp. 349–355, 1998.
   Web of Science ®Google Scholar
• C. E. Hagentoft, “Steady-state heat loss for an edge-insulated slab: part I,” Build. Environ., vol. 37, no. 1, pp. 19–25, 2002.
   Web of Science ®Google Scholar
• C. E. Hagentoft, “Periodic heat loss for an edge insulated slab: part II: a mixed boundary value problem,” Build. Environ., vol. 37, no. 1, pp. 27–34, 2002.
   Web of Science ®Google Scholar
• ISO 13370, Thermal Performance of Buildings – Heat Transfer via the Ground – Calculation Methods. Geneva, Switzerland: International Organization for Standardization, 2007.
   Google Scholar
• D. Chen, “Dynamic three-dimensional heat transfer calculation for uninsulated slab-on-ground constructions,” Energy Build., vol. 60, no. 5, pp. 420–428, 2013.
   Google Scholar
• D. Chen, “Steady-state heat transfer through a slab-on-ground floor over a constant temperature water table,” Heat Mass Transf., vol. 49, no. 12, pp. 1795–1801, 2013.
   Web of Science ®Google Scholar
• D. Chen, “Unified solutions for steady-state ground-coupled heat transfer,” Energy Build., vol. 68, no. 3, pp. 444–459, 2014.
   Google Scholar
• D. Chen, “Three-dimensional steady-state ground heat transfer for multi-zone buildings,” J. Build. Perform. Simul., vol. 8, no. 2, pp. 44–56, 2015.
   Web of Science ®Google Scholar
• P. G. Richards and E. H. Mathews, “A thermal design tool for buildings in ground contact,” Build. Environ., vol. 29, no. 1, pp. 73–82, 1994.
   Web of Science ®Google Scholar
• F. C. Winkelmann, “Underground surfaces: how to get a better underground surface heat transfer calculation in DOE-2.1E,” Building Energy Simulation User News, vol. 19, no. 1, pp. 6–13, 1998.
   Google Scholar
• Z. P. Zhong, and J. E. Braun, “A simple method for estimating transient heat transfer in slab-on-ground floors,” Build. Environ., vol. 42, no. 3, pp. 1071–1080, 2007.
   Web of Science ®Google Scholar
• P. D. Metz, “A simple computer program to model Three-Dimensional underground heat flow with realistic boundary conditions,” J. Solar Energy Eng., vol. 105, no. 1, pp. 42–49, 1983.
   Web of Science ®Google Scholar
• W. P. Bahnfleth, “Three dimensional modeling of heat transfer from slab floors,” PhD dissertation, University of Illinois, 1989.
   Google Scholar
• M. Deru, R. Judkoff, and J. Neymark, “Whole building energy simulation with a three-dimensional ground-coupled heat transfer model,” ASHRAE Trans., vol. 109, no. 1, pp. 557–565, 2003.
   Google Scholar
• E. Clements, “Three dimensional foundation heat transfer modules for whole building energy analysis,” MS Thesis, Pennsylvania State University, USA, 2004.
   Google Scholar
• M. Krarti and P. Ihm, “Implementation of a building foundation heat transfer model in EnergyPlus,” J. Build. Perform. Simul., vol. 2, no. 2, pp. 127–142, 2009.
   Web of Science ®Google Scholar
• M. Spiga and P. Vocale, “Effect of floor geometry on building heat loss via the ground,” Heat Transf. Eng., vol. 35, no. 18, pp. 1520–1527, 2014.
   Web of Science ®Google Scholar
• D. E. Claridge, “Design methods for earth-contact heat transfer,” in K. Boer (ed), Advances in Solar Energy. Boulder, Colorado: American Solar Energy Society, pp. 305–350, 1987.
   Google Scholar
• M. H. Adjali, M. Davies, and J. Littler, “Earth-contact heat flows: review and application of design guidance predictions,” Build. Serv. Eng. Res. Technol., vol. 19, no. 3, pp. 111–121, 1998.
   Google Scholar
• S. W. Rees, M. H. Adjali, Z. Zhou, M. Davies, and H. R. Thomas, “Ground heat transfer effects on the thermal performance of earth-contact structures,” Renew Sust. Energy Rev., vol. 4, no. 3, pp. 213–265, 2000.
   Web of Science ®Google Scholar
• S. Zoras, “A review of building earth-contact heat transfer,” Adv. Build. Energy Res., vol. 3, no. 1, pp. 289–313, 2009.
   Google Scholar
• M. Abramowitz and I. A. Stegun, Eds. Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables. New York: Dover Publication, 1972.
   Google Scholar
• T. Blomberg and J. Claesson, HEAT2 Version 10.02. Massachusetts, USA: Reading, 2016.
   Google Scholar
• T. Blomberg and J. Claesson, HEAT3 V7.1.0.0. Massachusetts, USA: Reading, 2016.
   Google Scholar
• A. Delsante, “Is the new generation of building energy rating software up to the task? - A review of AccuRate,” ABCB Conference ‘Building Australia’s Future 2005’, Surfers Paradise, Sept. 11–15, 2005.
   Google Scholar
• D. Chen, “AccuRate and the Chenath Engine for Residential House Energy Rating,” https://www.hstar.com.au/Home/Chenath. Accessed: March 16, 2018.
   Google Scholar