Optimal Design of Constructal T-Shaped Fin Under Partially Wet Condition for Enhanced Thermal Performance: An Analytical Approach

References

• P. Razelos, “A critical review of extended surface heat transfer,” Heat Transf. Eng., vol. 24, no. 6, pp. 11–28, 2003. DOI: 10.1080/714044411.
   Web of Science ®Google Scholar
• J. P. Luna-Abad, F. Alhama, and A. Campo, “Optimization of longitudinal rectangular fins through the concept of relative inverse admittance,” Heat Transf. Eng, vol. 31, no. 5, pp. 395–401, 2010. DOI: 10.1080/01457630903375228.
   Web of Science ®Google Scholar
• J. P. Luna-Abad, and F. Alhama, “Optimization of longitudinal rectangular fins with asymmetrical boundary conditions,” ASME Int. Heat Transf. Conf., Washington DC, USA, vol. 2, pp. 619–623, Aug. 8–13, 2010. DOI: 10.1115/IHTC14-22670.
   Google Scholar
• J. P. Luna-Abad, and F. Alhama, “Design and optimization of composite rectangular fins using the relative inverse thermal admittance,” ASME,” J. Heat Transf., vol. 135, no. 8, pp. 084504-084504-4, 2013. DOI: 10.1115/1.4024016.
   Web of Science ®Google Scholar
• J. P. Luna-Abad, F. Alhama, and A. Campo, “Universal curves for optimizing longitudinal rectangular fins radiating to free space,” ASME Int. Heat Transf. Conf. Washington DC, USA, vol. 5, pp. 893–897, Aug. 8–13, 2010. DOI: 10.1115/IHTC14-22665.
   Google Scholar
• F. Alhama, and J. P. Luna-Abad, “Efficiency universal curves for rectangular fins based on a generalised characteristic length,” WSEAS Trans. Heat Mass Transf., vol. 1, no. 1, pp. 48–55, 2006.
   Google Scholar
• J. L. Threlkeld, Thermal Environment Engineering. New York: Prentice-Hall, 1970.
   Google Scholar
• F. C. McQuiston, “Fin efficiency with combined heat and mass transfer,” ASHRAE Trans., vol. 81, no. 1, pp. 350–355, 1975.
   Google Scholar
• A. H. Elmahdy, and R. C. Biggs, “Efficiency of extended surfaces with simultaneous heat and mass transfer,” ASHRAE Trans, vol. 89, pp. 135–143, Jan., 1983.
   Google Scholar
• B. Kundu, “An analytical study of the effect of dehumidification of air on the performance and optimization of straight tapered fins,” Int. Commun. Heat Mass Transf., vol. 29, no. 2, pp. 269–278, 2002. DOI: 10.1016/S0735-1933(02)00317-2.
   Web of Science ®Google Scholar
• M. H. Sharqawy, and S. M. Zubair, “Efficiency and optimization of an annular fin with combined heat and mass transfer—An analytical solution,” Int. J. Refrig., vol. 30, no. 5, pp. 751–757, 2007. DOI: 10.1016/j.ijrefrig.2006.12.008.
   Web of Science ®Google Scholar
• M. H. Sharqawy, and S. M. Zubair, “Efficiency and optimization of straight fins with combined heat and mass transfer—An analytical solution,” Appl. Therm. Eng., vol. 28, no. 17–18, pp. 2279–2288, 2008. DOI: 10.1016/j.applthermaleng.2008.01.003.
   Web of Science ®Google Scholar
• M. H. Sharqawy, and S. M. Zubair, “Performance and optimum geometry of spines with simultaneous heat and mass transfer,” Int. J. Therm. Sci., vol. 48, no. 11, pp. 2130–2138, 2009. DOI: 10.1016/j.ijthermalsci.2009.03.009.
   Web of Science ®Google Scholar
• S. Sabbaghi, A. Rezaii, G. R. Shahri, and M. S. Baktash, “Mathematical analysis for the efficiency of a semi-spherical fin with simultaneous heat and mass transfer,” Int. J. Refrig., vol. 34, no. 8, pp. 1877–1882, 2011. DOI: 10.1016/j.ijrefrig.2011.06.014.
   Web of Science ®Google Scholar
• B. Kundu, P. Biswas, and K. S. Lee, “Establishment of modified-one-dimensional and two-dimensional models for two-directional heat conduction in a wet fin assembly,” Heat,” Transf. Eng., vol. 38, no. 2, pp. 190–205, 2017. DOI: 10.1080/01457632.2016.1177402.
   Web of Science ®Google Scholar
• M. M. Salah El-Din, “Performance analysis of partially wet fin assembly,” Appl. Therm. Eng., vol. 18, no. 5, pp. 337–349, 1998. DOI: 10.1016/S1359-4311(97)00076-8.
   Web of Science ®Google Scholar
• B. Kundu, “Performance and optimization analysis of SRC profile fins subject to simultaneous heat and mass transfer,” Int. J. Heat Mass Transf., vol. 50, no. 7–8, pp. 1545–1558, 2007. DOI: 10.1016/j.ijheatmasstransfer.2006.08.029.
   Web of Science ®Google Scholar
• B. Kundu, “Analysis of thermal performance and optimization of concentric circular fins under dehumidifying conditions,” Int. J. Heat Mass Transf., vol. 52, no. 11–12, pp. 2646–2659, 2009. DOI: 10.1016/j.ijheatmasstransfer.2008.12.017.
   Web of Science ®Google Scholar
• B. Kundu, and D. Barman, “An analytical prediction for performance and optimization of an annular fin assembly of trapezoidal profile under dehumidifying condition,” Energy, vol. 36, no. 5, pp. 2572–2588, 2011. DOI: 10.1016/j.energy.2011.01.052.
   Web of Science ®Google Scholar
• M. H. Sharqawy, A. Moinuddin, and S. M. Zubair, “Heat and mass transfer from annular fins of different cross-sectional area. Part I. Temperature distribution and fin efficiency,” Int. J. Refrig., vol. 35, no. 2, pp. 365–376, 2012. DOI: 10.1016/j.ijrefrig.2011.11.004.
   Web of Science ®Google Scholar
• A. Moinuddin, M. H. Sharqawy, and S. M. Zubair, “Heat and mass transfer from annular fins of different cross-sectional area. Part II. Optimal dimensions of fins,” Int. J. Refrig., vol. 35, no. 2, pp. 377–385, 2012. DOI: 10.1016/j.ijrefrig.2011.11.003.
   Web of Science ®Google Scholar
• C. H. Huang, and Y. L. Chung, “An inverse problem in determining the optimum shapes for partially wet fins based on efficiency maximization,” Int. J. Heat Mass Transf., vol. 90, pp. 364–375, 2015. Nov. DOI: 10.1016/j.ijheatmasstransfer.2015.06.070.
   Web of Science ®Google Scholar
• B. Kundu, and K. S. Lee, “Effects of psychometric properties on fin performances of minimum envelope shape of wet fins,” Energy Convers. Manag., vol. 110, pp. 481–493, 2016. March DOI: 10.1016/j.enconman.2015.09.054.
   Web of Science ®Google Scholar
• M. H. Sharqawy, and S. M. Zubair, “Efficiency and optimization of a straight rectangular fin with combined heat and mass transfer,” Heat Transf. Eng., vol. 29, no. 12, pp. 1018–1026, 2008. DOI: 10.1080/01457630802243030.
   Web of Science ®Google Scholar
• B. Kundu, and K. S. Lee, “Analytic solution for heat transfer of wet fins on account of all nonlinearity effects,” Energy, vol. 41, no. 1, pp. 354–367, 2012. DOI: 10.1016/j.energy.2012.03.004.
   Web of Science ®Google Scholar
• A. Bejan, “Constructal-theory network of conducting paths for cooling a heat generating volume,” Int. J. Heat Mass Transf., vol. 40, no. 4, pp. 799–816, 1997. DOI: 10.1016/0017-9310(96)00175-5.
   Web of Science ®Google Scholar
• A. Bejan, and M. Almogbel, “Constructal T- shaped fins,” Int. J. Heat Mass Transf., vol. 43, no. 12, pp. 2101–2115, 2000. DOI: 10.1016/S0017-9310(99)00283-5.
   Web of Science ®Google Scholar
• M. Asadi, B. Sunden, and G. Xie, “Constructal optimization of louver fin channels subjected to heat transfer rate maximization and pressure loss minimization,” Heat Transf. Eng., vol. 39, no. 5, pp. 436–448, 2018. 2017. DOI: 10.1080/01457632.2017.1312881.
   Web of Science ®Google Scholar
• B. Kundu, and D. Bhanja, “Performance and optimization analysis of a constructal T-shaped fin subject to variable thermal conductivity and convective heat transfer coefficient,” Int. J. Heat Mass Transf., vol. 53, no. 1–3, pp. 254–267, 2010. nos. DOI: 10.1016/j.ijheatmasstransfer.2009.09.034.
   Web of Science ®Google Scholar
• D. Bhanja, and B. Kundu, “Radiation effect on optimum design analysis of constructal T-shaped fin with variable thermal conductivity,” Heat and Mass Transf., vol. 48, no. 1, pp. 109–122, 2012. DOI: 10.1007/s00231-011-0845-1.
   Web of Science ®Google Scholar
• S. A. Hazarika, D. Bhanja, S. Nath, and B. Kundu, “Accurate predictions for optimum design of a T-shaped fin under an actual wet load condition,” Int. J. Refrig., vol. 82, pp. 141–162, 2017. Oct. DOI: 10.1016/j.ijrefrig.2017.06.032.
   Web of Science ®Google Scholar
• S. A. Hazarika, D. Bhanja, S. Nath, and B. Kundu, “Geometric optimization and performance study of a constructal T-shaped fin under simultaneous heat and mass transfer,” Appl. Therm. Eng., vol. 109, pp. 162–174, 2016. Oct. DOI: 10.1016/j.applthermaleng.2016.08.007.
   Web of Science ®Google Scholar
• X. Xu, L. Xia, M. Chan, and S. Deng, “A modified McQuiston model for evaluating efficiency of wet fin considering effect of condensate film moving on fin surface,” Energy Convers. Manag., vol. 49, no. 8, pp. 2403–2408, 2008. DOI: 10.1016/j.enconman.2008.01.015.
   Web of Science ®Google Scholar
• T. H. Chilton, and A. P. Colburn, “Mass transfer (absorption) coefficients,” IndusEng Chem, vol. 26, no. 11, pp. 1183–1187, 1934. DOI: 10.1021/ie50299a012.
   Google Scholar
• J. H. He, “Homotopy perturbation technique,” Comput Methods Appl Mech Eng, vol. 178, no. 3–4, pp. 257–262, 1999. DOI: 10.1016/S0045-7825(99)00018-3.
   Web of Science ®Google Scholar
• M. Jalaal, K. Mehravaran, and A. Phillion, “The effect of temperature dependency of surface emissivity in 1D and 2D nonlinear heat radiation equations,” Heat Transf. Eng., vol. 33, no. 11, pp. 982–990, 2012. DOI: 10.1080/01457632.2012.654733.
   Web of Science ®Google Scholar