References
- L. Wang, B. Sundén, and R. M. Manglik, Plate Heat Exchangers: Design, Applications and Performance. Southampton, UK: WIT Press, 2007,
- H. M. Metwally and R. M. Manglik, “Enhanced heat transfer due to curvature-induced lateral vortices in laminar flows in sinusoidal corrugated-plate channels,” Int. J. Heat Mass Transf, vol. 47, no. 10-11, pp. 2283–2292, May 2004. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2003.11.019.
- D. S. Zhu, S. W. Qian and X. M. Ma, Technology and Development in Heat Exchangers, 1st ed. Beijing, China: China Petrochemical Press, 2008,
- M. Kim, Y. J. Baik, S. R. Park, H. S. Ra and H. Lim, “Experimental study on corrugated cross-flow air-cooled plate heat exchangers,” Exp. Therm. Fluid Sci., vol. 34, no. 8, pp. 1265–1272, 2010. Nov. 2010. DOI: https://doi.org/10.1016/j.expthermflusci.2010.05.007.
- K. Shaji and S. K. Das, “The effect of flow maldistribution on the evaluation of axial dispersion and thermal performance during the single-blow testing of plate heat exchangers,” Int. J. Heat Mass Transf, vol. 53, no. 7/8, pp. 1591–1602, Mar. 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2009.10.048.
- R. Y. Miura, F. C. C. Galeazzo, C. C. Tadini, and J. A. W. Gut, “The effect of flow arrangement on the pressure drop of plate heat exchangers,” Chem. Eng. Sci., vol. 63, no. 22, pp. 5386–5393, 2008. Nov. 2008. DOI: https://doi.org/10.1016/j.ces.2008.07.029.
- A. S. Wanniarachchi, U. Ratnam, B. E. Tilton, and K. Dutta-Roy, “Approximate correlations for chevron-type plate heat exchangers,” Proceedings of the 1995 National Heat Transfer Conference, ASME, New York, NY, vol. 12, pp. 145–151. Aug. 5–9, 1995.
- R. Steinhagen, H. M. Steililiagen, and K. Maani, “Problems and costs due to heat exchangers fouling in New Zealand industries,” Heat Transf. Eng., vol. 14, no. 1, pp. 19–30, 1993. DOI: https://doi.org/10.1080/01457639308939791.
- R. L. Webb and W. Li, “Fouling in enhanced tubes using cooling tower water: Part I: Long-term fouling data,” Int. J. Heat Mass Transf., vol. 43, no. 19, pp. 3567–3578, 2000. Oct. DOI: https://doi.org/10.1016/S0017-9310(99)00395-6.
- W. Li and R. L. Webb, “Fouling in enhanced tubes using cooling tower water: Part II: Combined particulate and precipitation fouling,” Int. J. Heat Mass Transf., vol. 43, no. 19, pp. 3579–3588, 2000. Oct. DOI: https://doi.org/10.1016/S0017-9310(99)00393-2.
- H. Müller-Steinhagen and Q. Zhao, “Investigation of low fouling surface alloys made by ion implantation technology,” Chem. Eng. Sci., vol. 52, no. 19, pp. 3321–3332, 1997. Oct. DOI: https://doi.org/10.1016/S0009-2509(97)00162-0.
- A. Bornhorst, H. Müller-Steinhagen, and Q. Zhao, “Reduction of scale formation under pool boiling conditions by ion implantation and magnetron sputtering on heat transfer surfaces,” Heat Transf. Eng., vol. 20, no. 2, pp. 6–14, 1999. DOI: https://doi.org/10.1080/014576399271529.
- W. Li and G. Li, “Modeling cooling tower fouling in helical-rib tubes based on Von-Karman analogy,” Int. J. Heat Mass Transf., vol. 53, no. 13/14, pp. 2715–2721, Jun. 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.02.034.
- T. R. Bott, “General models of fouling,” in: T. R. Bott, Ed. Fouling of heat exchangers, Amsterdam, the Netherlands: Elsevier Science B.V., 1995, pp. 23–32.
- A. P. Watkinson, “Particulate fouling of sensible heat exchangers,” Ph.D. dissertation, University of British Columbia, Vancouver, Canada, 1968.
- E. Somerscales, “Fouling of heat transfer surfaces: An historical review,” Heat Transf. Eng., vol. 11, no. 1, pp. 19–36, 1990. DOI: https://doi.org/10.1080/01457639008939720.
- M. Förster, W. Augustin, and M. Bohnet, “Influence of the adhesion force crystal/heat exchanger surface on fouling mitigation,” Chem. Eng. Process., vol. 38, no. 4–6, pp. 449–461, Sep. 1999. DOI: https://doi.org/10.1016/S0255-2701(99)00042-2.
- M. Förster and M. Bohnet, “Influence of the interfacial free energy crystal/heat transfer surface on the induction period during fouling,” Int. J. Therm. Sci., vol. 38, no. 11, pp. 944–954, Dec. 1999. DOI: https://doi.org/10.1016/S1290-0729(99)00102-7.
- H. M. Müller-Steinhagen and C. A. Branch, “Influence of thermal boundary conditions on calcium carbonate fouling in double pipe heat exchangers: Einfluβ der thermischen Randbedingungen auf die Ablagerung von CaCO3 in Doppelrohrwärmeübertragern,” Chem. Eng. Process, vol. 24, no. 2, pp. 65–73, Sep. 1988. DOI: https://doi.org/10.1016/0255-2701(88)87015-6.
- B. Bansal, X. D. Chen, and H. Müller-Steinhagen, “Analysis of ‘classical’ deposition rate law for crystallisation fouling,” Chem. Eng. Process., vol. 47, no. 8, pp. 1201–1210, Aug. 2008. DOI: https://doi.org/10.1016/j.cep.2007.03.016.
- D. Q. Kern and R. E. Seaton, “A theoretical analysis of thermal surface fouling,” Br. Chem. Eng., vol. 4, no. 5, pp. 258–262, 1959.
- B. Merheb, G. Nassar, B. Nongaillard, G. Delaplace, and J. C. Leuliet, “Design and performance of a low-frequency non-intrusive acoustic technique for monitoring fouling in plate heat exchangers,” J. Food Eng, vol. 82, no. 4, pp. 518–527, Oct. 2007. DOI: https://doi.org/10.1016/j.jfoodeng.2007.03.022.
- M. Izadi, D. K. Aidun, P. Marzocca, and H. Lee, “Integrated experimental investigation of seawater composite fouling effect on the 90/10 Cu/Ni tube,” Appl. Therm. Eng., vol. 31, no. 14-15, pp. 2464–2473, Oct. 2011. DOI: https://doi.org/10.1016/j.applthermaleng.2011.04.012.
- W. Li, K. Zhou, R. M. Manglik, G.-Q. Li, and A. E. Bergles, “Investigation of CaCO3 fouling in plate heat exchangers,” Heat Mass Transfer, vol. 52, no. 11, pp. 2401–2414, Jan. 2016. DOI: https://doi.org/10.1007/s00231-016-1752-2.
- W. Li, “The internal surface area basis, a key issue of modeling fouling in enhanced heat transfer tubes,” Int. J. Heat Mass Transf., vol. 46, no. 22, pp. 4345–4349, Oct. 2003. DOI: https://doi.org/10.1016/S0017-9310(03)00254-0.
- W. Li and R. L. Webb, “Fouling characteristics of internal helical-rib roughness tubes using low-velocity cooling tower water,” Int. J. Heat Mass Transf., vol. 45, no. 8, pp. 1685–1691, Apr. 2002. DOI: https://doi.org/10.1016/S0017-9310(01)00263-0.
- G.-M. Zhang, et al., “Particulate fouling and composite fouling assessment in corrugated plate heat exchangers,” Int. J. Heat Mass Transf., vol. 60, pp. 263–273, May 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.01.040.
- W. Li, P. Fu, H. Li, G. Li, and P. Thors, “Numerical-theoretical analysis of heat transfer, pressure drop, and fouling in internal helically ribbed tubes of different geometries,” Heat Transf. Eng, vol. 37, no. 3/4, pp. 279–289, 2016. DOI: https://doi.org/10.1080/01457632.2015.1052665.
- W. Li, H.-X. Li, G.-Q. Li, and S.-C. Yao, “Numerical and experimental analysis of composite fouling in corrugated plate heat exchangers,” Int. J. Heat Mass Transf, vol. 63, pp. 351–360, 2013. Aug. 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.03.073.
- Y. Mahdi, A. L. Mouheb, and A. Oufer, “Dynamic model for milk fouling in a plate heat exchanger,” Appl. Math. Model, vol. 33, no. 2, pp. 648–662, Feb. 2009. DOI: https://doi.org/10.1016/j.apm.2007.11.030.
- G. Zhang, G. Li, W. Li and D. Kukulka, “Investigation of precipitation fouling in corrugated plate heat exchangers,” Proceedings of the ASME 2013 Heat Transfer Summer Conference, ASME, Minneapolis, MN, USA, vol. 2, p. V002T04A007, Jul., pp. 14–19, 2013.
- G. Zhang, G. Li and W. Li, “Analysis of composite fouling in corrugated plate heat exchangers,” Proceedings of the ASME 2013 Heat Transfer Summer Conference, ASME, Minneapolis, MN, USA, vol. 2, p. V002T04A008, Jul., pp. 14–19, 2013.
- L. Ren, et al., “Oxidation Behavior of the supercritical water on the ternary Ni-W-P coating,” Chem. Eng. J., vol. 370, pp. 1388–1406, 2019. Aug. 2019. DOI: https://doi.org/10.1016/j.cej.2019.04.011.
- K. Zielińska, A. Stankiewicz, and I. Szczygieł, “Electroless deposition of Ni-P-nano-ZrO2 composite coatings in the presence of various types of surfactants,” J. Colloid Interf. Sci, vol. 377, no. 1, pp. 362–367, 2012. Jul. 2012. DOI: https://doi.org/10.1016/j.jcis.2012.03.049.
- Y. H. Cheng, H. Y. Chen, Z. C. Zhu, T. C. Jen, and Y. X. Peng, “Experimental study on the anti-fouling effects of Ni-Cu-P-PTFE deposit surface of heat exchangers,” Appl. Therm. Eng., vol. 68, no. 1/2, pp. 20–25, Jul. 2014. DOI: https://doi.org/10.1016/j.applthermaleng.2014.04.003.
- J. Hu, B. Wang, Y. Xu, and L. Zhou, “The anticorrosive and antifouling properties of Ni-W-P-nSiO2 composite coating in a simulated oilfield environment,” JOM, vol. 70, no. 11, pp. 2619–2625, 2018. Sep. DOI: https://doi.org/10.1007/s11837-018-3133-4.
- S. Balasubramanian and V. M. Puri, “Thermal energy savings in pilot-scale plate heat exchanger system during product processing using modified surfaces,” J. Food Eng., vol. 91, no. 4, pp. 608–611, 2009. Apr. DOI: https://doi.org/10.1016/j.jfoodeng.2008.10.014.
- K. A. Bani, E. Scharnbeck, U. D. Kück, and N. Räbiger, “Reduction of milk fouling inside gasketed plate heat exchanger using nano-coatings,” Food Bioprod. Process., vol. 88, no. 4, pp. 349–356, 2010. Dec. 2010. DOI: https://doi.org/10.1016/j.fbp.2010.09.010.
- Q. Zhao and Y. Liu, “Investigation of graded Ni-Cu-P-PTFE composite coatings with antiscaling properties,” Appl. Surf. Sci., vol. 229, no. 1-4, pp. 56–62, 2004. no. 1–4, May DOI: https://doi.org/10.1016/j.apsusc.2004.01.044.