References
- F. P. Incropera, D. P. DeWitt, T. L. Bergman, and A. S. Lavine, Fundamentals of Heat and Mass Transfer, New York, NY, USA: John Wiley & Sons, 2007.
- J. Kim, “Review of nucleate pool boiling bubble heat transfer mechanisms,” Int. J. Multiphase Flow, vol. 35, no. 12, pp. 1067–1076, Dec. 2009. DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2009.07.008.
- W. M. Rohsenow, “A method of correlating heat transfer data for surface boiling of liquids,” Trans. ASME, vol. 74, pp. 969–976, Jul. 1952.
- K. Stephan and M. Abdelsalam, “Heat transfer correlation for natural convection boiling,” int. j. Heat Mass Transfer, vol. 23, no. 1, pp. 73–87, Jan. 1980. DOI: https://doi.org/10.1016/0017-9310(80)90140-4.
- M. G. Cooper, “Saturation nucleate pool boiling—a simple correlation,” Inst. Chem. Eng. Symp. Ser., vol. 86, pp. 786–793, Jan. 1984. DOI: https://doi.org/10.1016/B978-0-85295-175-0.50013-8.
- C. B. Chiou, D. C. Lu and C. C. Wang, “Investigations of pool boiling heat transfer of binary refrigerant mixtures,” Heat Transfer Eng., vol. 18, no. 3, pp. 61–72, 1997. DOI: https://doi.org/10.1080/01457639708939902.
- G. Son, N. Ramanujapu and V. K. Dhir, “Numerical simulation of bubble merger process on a single nucleation site during pool nucleate boiling,” ASME J. Heat Transfer, vol. 124, no. 1, pp. 51–62, Feb. 2002. DOI: https://doi.org/10.1115/1.1420713.
- S. W. J. Welch and J. A. Wilson, “A volume of fluid based method for fluid flows with phase change,” J. Comput. Phys., vol. 160, no. 2, pp. 662–682, May. 2000. DOI: https://doi.org/10.1006/jcph.2000.6481.
- S. W. J. Welch and T. Radichi, “Numerical computation of film boiling including conjugate heat Transfer,” Numer. Heat Transfer, vol. 42, no. 1, pp. 35–53, Nov. 2002. DOI: https://doi.org/10.1080/10407790190053824.
- A. Becker, M. Kapitz and S. A. D. Wiesche, “Numerical simulation of single bubble dynamics during flow boiling conditions on a horizontal surface,” Heat Transfer Eng., vol. 35, no. 5, pp. 461–471, 2014. DOI: https://doi.org/10.1080/01457632.2013.833045.
- A. Coulibaly, J. Bi and D. M. Christopher, “Numerical study of bubble coalescence heat transfer during nucleate pool boiling,” Heat Transfer Eng., vol. 40, no. 5-6, pp. 497–507, 2019. DOI: https://doi.org/10.1080/01457632.2018.1432090.
- A. K. Das, P. K. Das and P. Saha, “Applicability of a mechanistic model for the prediction of boiling heat transfer for refrigerants,” Heat Transfer Eng., vol. 31, no. 5, pp. 374–382, Jul. 2010. DOI: https://doi.org/10.1080/01457630903373173.
- P. Stephan and J. Hammer, “A new model for nucleate boiling heat transfer,” Heat Mass Transfer, vol. 30, no. 2, pp. 119–125, Nov. 1994. DOI: https://doi.org/10.1007/BF00715018.
- P. C. Stephan and C. A. Busse, “Analysis of the heat transfer coefficient of grooved heat pipe evaporator walls,” Int. J. Heat Mass Transfer, vol. 35, no. 2, pp. 383–391, Feb. 1992. DOI: https://doi.org/10.1016/0017-9310(92)90276-X.
- C. Kunkelmann and P. Stephan, “CFD simulation of boiling flows using the volume-of-fluid method within OpenFOAM,” Numer. Heat Transfer, vol. 56, no. 8, pp. 631–646, Dec. 2009. DOI: https://doi.org/10.1080/10407780903423908C.
- G. Son and V. K. Dhir, “Numerical simulation of nucleate boiling on a horizontal surface at high heat fluxes,” Int. J. Heat Mass Transfer, vol. 51, no. 9-10, pp. 2566–2582, May. 2008. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2007.07.046.
- G. Son, V. K. Dhir and N. Ramanujapu, “Dynamics and heat transfer associated with a single bubble during nucleate boiling on a horizontal surface,” J. Heat Transfer, vol. 121, no. 3, pp. 623–632, Aug. 1999. DOI: https://doi.org/10.1115/1.2826025.
- V. K. Dhir, H. S. Abarajith and D. Li, “Bubble dynamics and heat transfer during pool and flow boiling,” Heat Transfer Eng., vol. 28, no. 7, pp. 608–624, 2007. DOI: https://doi.org/10.1080/01457630701266421.
- A. Mukherjee and V. K. Dhir, “Study of lateral merger of vapour bubbles during nucleate pool boiling,” ASME J. Heat Transfer, vol. 126, no. 6, pp. 1023–1039, Jan. 2004. DOI: https://doi.org/10.1115/1.1834614.
- A. Mukherjee and S. G. Kandlikar, “Numerical study of single bubbles with dynamic contact angle during nucleate pool boiling,” Int. J. Heat Mass Transfer, vol. 50, no. 1-2, pp. 127–138, Jan. 2007. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2006.06.037.
- F. H. Harlow and J. E. Welch, “Numerical calculation of time-dependent viscous incompressible flow of fluid with free surface,” Phys. Fluids, vol. 8, no. 12, pp. 2182–2189, Sep. 1965. DOI: https://doi.org/10.1063/1.1761178.
- T. Fuchs, J. Kern and P. Stephan, “A transient nucleate boiling model including microscale effects and wall heat transfer,” J. Heat Transfer, vol. 128, no. 12, pp. 1257–1265, Dec. 2006. DOI: https://doi.org/10.1115/1.2349502.
- G. Hazi and A. Markus, “On the bubble departure diameter and release frequency based on numerical simulation results,” Int. J. Heat Mass Transfer, vol. 52, no. 5-6, pp. 1472–1480, Feb. 2009. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2008.09.003.
- N. Surya, S. Atul and S. Suneet, “Rainbow schlieren-based investigation of heat transfer mechanisms during isolated nucleate pool boiling phenomenon: effect of superheat Levels,” Int. J. Heat Mass Transfer, vol. 120, pp. 127–143, May 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.005.
- N. Surya, S. Tajinder, S. Atul and S. Suneet, “Experiments on the effects of varying subcooled conditions on the dynamics of single vapor bubble and heat transfer rates in nucleate pool boiling regime,” Int. J. Heat Mass Transfer, vol. 134, pp. 85–100, May 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.12.139.
- N. Surya, S. Atul and S. Suneet, “Rainbow schlieren-based direct visualization of thermal gradients around single vapor bubble during nucleate boiling phenomena of water,” Int. J. Multiphase Flow, vol. 110, no. 8, pp. 82–95, Jan. 2019. DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2018.08.012.
- K. Prasad and S. Atul, “Understanding the growth mechanism of single vapor bubble on a hydrophobic surface: experiments under nucleate pool boiling regime,” Int. J. Heat Mass Transfer, vol. 154, pp. 119775, Jun. 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.119775.
- J. U. Brackbill, D. B. Koethe and C. Zemach, “A continuum method for modeling surface tension,” J. Comput. Phys., vol. 100, no. 2, pp. 335–354, Jun. 1992. DOI: https://doi.org/10.1016/0021-9991(92)90240-Y.
- ANSYS FLUENT 16.2.3 User’s Guide, ANSYS, Inc, 2018.
- E. Wagner, P. Stephan, O. Koeppen and H. Auracher, “High resolution temperature measurements at moving vapour/liquid and vapour/liquid/solid interfaces during bubble growth in nucleate boiling,” Proc. 4th int. Berlin, Germany: Berlin Workshop Transport Phenomena Moving Boundaries, pp. 260–277, 2007.
- C. Zhihao and U. Yoshio, “On heat transfer and evaporation characteristics in the growth process of a bubble with microlayer structure during nucleate boiling,” Int. J. Heat Mass Transfer, vol. 81, pp. 750–759, Feb. 2015. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.10.058.