References
- J. Kang and Y. Rong, “Modeling and simulation of load heating in heat treatment furnaces,” J. Mater. Process Technol., vol. 174, no. 1–3, pp. 109–114, May 2006. DOI: https://doi.org/10.1016/j.jmatprotec.2005.03.037.
- G. Yan, L. Han, C. Li, X. Luo, and J. Gu, “Characteristic of retained austenite decomposition during tempering and its effect on impact toughness in SA508 Gr. 3 steel,” J. Nucl. Mater., vol. 483, pp. 167–175, Jan. 2017. DOI: https://doi.org/10.1016/j.jnucmat.2016.11.011.
- M. Gao, C. Reid, M. Jahedi, and Y. Li, “Estimating equilibration times and heating/cooling rates in heat treatment of workpieces with arbitrary geometry,” J. Mater. Eng. Perform., vol. 9, no. 1, pp. 62–71, Feb. 2000. DOI: https://doi.org/10.1361/105994900770346295.
- S. Zhang, L. Wen, C. Bai, D. Chen, and Z. Long, “Analyses on 3-D gas flow and heat transfer in ladle furnace lid,” Appl. Math. Model., vol. 33, no. 6, pp. 2646–2662, Jun. 2009. DOI: https://doi.org/10.1016/j.apm.2008.08.003.
- C. H. Gur and J. Pan, Handbook of Thermal Process Modeling Steels. Boca Raton, FL, USA: CRC Press, 2008,
- X. Hao, J. Gu, N. Chen, W. Zhang, and X. Zuo, “3-D Numerical analysis on heating process of loads within vacuum heat treatment furnace,” Appl. Therm. Eng., vol. 28, no. 14–15, pp. 1925–1931, Oct. 2008. DOI: https://doi.org/10.1016/j.applthermaleng.2007.12.007.
- C.-H. Ho and T.-C. Chen, “Temperature distribution of taper rolls in preheating furnace of cold rolling continuous annealing line,” Heat Transf. Eng, vol. 31, no. 10, pp. 880–888, Jul. 2010. DOI: https://doi.org/10.1080/01457630903550309.
- E. B. Ratts, “A study of the radiant heat exchange within a controlled-atmosphere furnace,” Heat Transf. Eng., vol. 21, no. 5, pp. 55–64, Oct. 2000. DOI: https://doi.org/10.1080/01457630050127955.
- R. P. Chopade, S. C. Mishra, P. Mahanta, and S. Maruyama, “On configuration of load in radiant furnace for uniform thermal conditions,” Heat Transf. Eng., vol. 35, no. 1, pp. 94–109, Aug. 2014. DOI: https://doi.org/10.1080/01457632.2013.810461.
- J. Yu and M. Zhang, “Modeling and experiments for heat transfer process in pulverized coal-firing furnace with two-dimensional radiation characteristics,” Heat Transf. Eng., vol. 30, no. 12, pp. 988–997, Jul. 2009. DOI: https://doi.org/10.1080/01457630902837475.
- Y. Han, F. Liu, and X. Ran, “Numerical analysis of flow fields and temperature fields in a regenerative heating furnace for steel pipes,” J. Therm. Sci. Eng. Appl., vol. 10, no. 3, 031010, Jun. 2018. DOI: https://doi.org/10.1115/1.4038702.
- C. Liang, D. R. Patel, and M. R. Shelat, “Mathematical modeling of a long finned tube heating and cooling in a multizone furnace,” J. Therm. Sci. Eng. Appl., vol. 10, no. 5, 051022, Oct. 2018. DOI: https://doi.org/10.1115/1.4040278.
- Y. Yang, R. A. De Jong, and M. A. Reuter, “CFD prediction for the performance of a heat treatment furnace,” PCFD, vol. 7, no. 2/3/4, pp. 209–218, 2007. DOI: https://doi.org/10.1504/PCFD.2007.013013.
- C. Jordan and M. Harasek, “Improvement of a combustion unit based on a grate furnace for granular dry solid biofuels using CFD methods,” Heat Transf. Eng., vol. 31, no. 9, pp. 774–781, Jul. 2010. DOI: https://doi.org/10.1080/01457630903501062.
- N. Lior, “The cooling process in gas quenching,” J. Mater. Process Technol., vol. 155–156, pp. 1881–1888, Nov. 2004. DOI: https://doi.org/10.1016/j.jmatprotec.2004.04.279.
- J. Wang et al., “Numerical simulation of high pressure gas quenching of H13 steel,” J. Mater. Process Technol., vol. 202, no. 1–3, pp. 188–194, Jun. 2008. DOI: https://doi.org/10.1016/j.jmatprotec.2007.08.059.
- B. Mayr, R. Prieler, M. Demuth, L. Moderer, and C. Hochenauer, “CFD analysis of a pusher type reheating furnace and the billet heating characteristic,” Appl. Therm. Eng., vol. 115, pp. 986–994, Mar. 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.01.028.
- G. Tang et al., “Modeling of the slab heating process in a walking beam reheating furnace for process optimization,” Int. J. Heat Mass Transf., vol. 113, pp. 1142–1151, Oct. 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.06.026.
- C.-N. Lin, Y.-P. Luo, J.-Y. Jang, and C.-H. Wang, “Novel approach to estimate the optimum zone fuel mass flow rates for a walking beam type reheating furnace,” Heat Transf. Eng., vol. 39, no. 7–8, pp. 586–597, Jul. 2018. DOI: https://doi.org/10.1080/01457632.2017.1325656.
- J. Govardhan, G. Rao, and J. Narasaiah, “Experimental investigations and CFD study of temperature distribution during oscillating combustion in a crucible furnace,” Int. J. Energy Environ. Eng., vol. 2, no. 5, pp. 783–796, 2011. https://www.ijee.ieefoundation.org/vol2/issue5/IJEE_02_v2n5.pdf.
- B. Mayr, R. Prieler, M. Demuth, M. Potesser, and C. Hochenauer, “CFD and experimental analysis of a 115 kW natural gas fired lab-scale furnace under oxy-fuel and air–fuel conditions,” Fuel, vol. 159, pp. 864–875, Nov. 2015. DOI: https://doi.org/10.1016/j.fuel.2015.07.051.
- R. Prieler, B. Mayr, M. Demuth, D. Spoljaric, and C. Hochenauer, “Application of the steady flamelet model on a lab-scale and an industrial furnace for different oxygen concentrations,” Energy, vol. 91, pp. 451–464, Nov. 2015. DOI: https://doi.org/10.1016/j.energy.2015.08.070.
- B. Danon, E.-S. Cho, W. D. Jong, and D. Roekaerts, “Numerical investigation of burner positioning effects in a multi-burner flameless combustion furnace,” Appl. Therm. Eng., vol. 31, no. 17–18, pp. 3885–3896, Dec. 2011. DOI: https://doi.org/10.1016/j.applthermaleng.2011.07.036.
- C. Galletti, G. Coraggio, and L. Tognotti, “Numerical investigation of oxy-natural-gas combustion in a semi-industrial furnace: Validation of CFD sub-models,” Fuel, vol. 109, pp. 445–460, Jul. 2013. DOI: https://doi.org/10.1016/j.fuel.2013.02.061.
- T. Ishii, C. Zhang, and Y. Hino, “Numerical study of the performance of a regenerative furnace,” Heat Transf. Eng., vol. 23, no. 4, pp. 23–33, 2002. DOI: https://doi.org/10.1080/01457630290090473.
- V. K. Singh, P. Talukdar, and P. J. Coelho, “Performance evaluation of two heat transfer models of a walking beam type reheat furnace,” Heat Transf. Eng., vol. 36, no. 1, pp. 91–101, 2015. DOI: https://doi.org/10.1080/01457632.2014.906287.
- Y. Tominaga and T. Stathopoulos, “CFD simulation of near-field pollutant dispersion in the urban environment: A review of current modeling techniques,” Atmos. Environ., vol. 79, pp. 716–730, Nov. 2013. DOI: https://doi.org/10.1016/j.atmosenv.2013.07.028.
- R. Prieler, M. Demuth, D. Spoljaric, and C. Hochenauer, “Numerical investigation of the steady flamelet approach under different combustion environments,” Fuel, vol. 140, pp. 731–743, Jan. 2015. DOI: https://doi.org/10.1016/j.fuel.2014.10.006.
- R. Prieler, B. Mayr, M. Demuth, B. Holleis, and C. Hochenauer, “Prediction of the heating characteristic of billets in a walking hearth type reheating furnace using CFD,” Int. J. Heat Mass Transf., vol. 92, pp. 675–688, Jan. 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.08.056.
- Finkl Steel Inc., Saint-Joseph-de-Sorel, QC, Canada. “Heat Treatment Department” [online]. Available: http://www.sorelforge.com/. Accessed: Sep. 10, 2015
- ANSYS Fluent User’s Guide, 17.2. Canonsburg, PA, USA: ANSYS Inc., 2016.
- B. E. Launder and D. B. Spalding, Mathematical Models of Turbulence. New York, USA: Academic Press, 1972.
- N. B. Arkhazloo et al., “Experimental and unsteady CFD analyses of the heating process of large size forgings in a gas-fired furnace,” Case Stud. Therm. Eng., vol. 14, 100428, Sep. 2019. DOI: https://doi.org/10.1016/j.csite.2019.100428.
- J. Zhang, W. Prationo, L. Zhang, and Z. Zhang, “Computational fluid dynamics modeling on the air-firing and oxy-fuel combustion of dried Victorian brown coal,” Energy Fuels, vol. 27, no. 8, pp. 4258–4269, Jul. 2013. DOI: https://doi.org/10.1021/ef400032t.
- S.-E. Kim, D. Choudhury, and B. Patel, “Computations of complex turbulent flows using the commercial code FLUENT,” in Manuel D. Salas, Jerry N. Hefner, Leonidas Sakell (Eds.). Modeling Complex Turbulent Flows. Dordrecht, Netherlands: Springer, pp. 259–276. 1999. DOI: https://doi.org/10.1007/978-94-011-4724-8_15.
- T.-H. Shih, J. Zhu, and J. L. Lumley, “A realizable Reynolds stress algebraic equation model,” NASA Lewis Research Center, Cleveland, Ohio, USA, NASA TM 105993, 1993.
- V. Yakhot, S. Orszag, S. Thangam, T. Gatski, and C. Speziale, “Development of turbulence models for shear flows by a double expansion technique,” Phys. Fluids A: Fluid Dyn., vol. 4, no. 7, pp. 1510–1520, 1992. DOI: https://doi.org/10.1063/1.858424.
- D. C. Wilcox, “Turbulence modeling for CFD,” DCW Industries, vol. 2, pp. 103–217, La Canada, CA, 1998.
- F. R. Menter, “Two-equation eddy-viscosity turbulence models for engineering applications,” AIAA J., vol. 32, no. 8, pp. 1598–1605, Feb. 1994. DOI: https://doi.org/10.2514/3.12149.
- R. Cant, “SB Pope, Turbulent Flows, Cambridge University Press, Cambridge, UK,” Combust. Flame, vol. 125, no. 4, pp. 1361–1362, 2001. DOI: https://doi.org/10.1016/S0010-2180(01)00244-9.
- B. F. Magnussen and B. H. Hjertager, “On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion,” Symp. (Int.) Combust., vol. 16, no. 1, pp. 719–729, 1977. DOI: https://doi.org/10.1016/S0082-0784(77)80366-4.
- H. M. Ismail, H. K. Ng, and S. Gan, “Evaluation of non-premixed combustion and fuel spray models for in-cylinder diesel engine simulation,” Appl. Energy, vol. 90, no. 1, pp. 271–279, Feb. 2012. DOI: https://doi.org/10.1016/j.apenergy.2010.12.075.
- T. Ishii, C. Zhang, and S. Sugiyama, “Numerical simulations of highly preheated air combustion in an industrial furnace,” J. Energy Resour. Technol., vol. 120, no. 4, pp. 276–284, Dec. 1998. DOI: https://doi.org/10.1115/1.2795048.
- C. Bowman, Chemistry of Gaseous Pollutant Formation and Destruction, New York, USA: John Wiley & Sons, 1991.
- Y. Sivathanu and G. M. Faeth, “Generalized state relationships for scalar properties in nonpremixed hydrocarbon/air flames,” Combust. Flame, vol. 82, no. 2, pp. 211–230, Nov. 1990. DOI: https://doi.org/10.1016/0010-2180(90)90099-D.
- G. Raithby and E. Chui, “A finite-volume method for predicting a radiant heat transfer in enclosures with participating media,” J. Heat Transfer. vol. 112, no. 2, pp. 415–423, May 1990. DOI: https://doi.org/10.1115/1.2910394.
- T. Smith, Z. Shen, and J. Friedman, “Evaluation of coefficients for the weighted sum of gray gases model,” J. Heat Transfer, vol. 104, no. 4, pp. 602–608, 1982. DOI: https://doi.org/10.1115/1.3245174.
- H. K. Versteeg and W. Malalasekera, An Introduction to Computational Fluid Dynamics: The Finite Volume Method. Essex, England: Pearson Education Limited, 2007.
- B. Hadała, Z. Malinowski, and M. Rywotycki, “Energy losses from the furnace chamber walls during heating and heat treatment of heavy forgings,” Energy, vol. 139, pp. 298–314, Nov. 2017. DOI: https://doi.org/10.1016/j.energy.2017.07.121.
- Honeywell Process Co. "UDC2500 Universal Digital Controller Product", Apr. 2017. Available: https://www.honeywellprocess.com/. Accessed: Jan. 26, 2016.
- JMatPro Users Guide 6.2.1. Guildford, UK: Sente Software Ltd. [Online]. Availble https://www.sentesoftware.co.uk/jmatpro. Accessed: Feb. 20, 2016.
- M. Lyassami, D. Shahriari, E. Ben Fredj, J. B. Morin, and M. Jahazi, “Numerical simulation of water quenching of large size steel forgings: Effects of macrosegregation and grain size on phase distribution,” JMMP, vol. 2, no. 2, pp. 34, Jun. 2018. DOI: https://doi.org/10.3390/jmmp2020034.
- Honeywell Process Co. “SMV 300 smart multi-variable transmitter” [online]. Available: https://www.honeywellprocess.com/. Accessed: Jan. 26, 2016.
- Omega Engineering Inc., St-Eustache, St-Eustache, QC, Canada. “Thermocouple types” [Online]. Available: https://www.omega.ca/en/resources/thermocouple-types. Accessed: Nov. 12, 2015.
- G. P. Smith et al., GRI-Mech 3.0, Berkeley, CA, USA: Gas Research Institute. [Online]. Available: http://www.me.berkeley.edu/gri_mech/. Accessed: Oct. 3, 2020.
- B. Ničeno, A. Dronkers, and K. Hanjalić, “Turbulent heat transfer from a multi-layered wall-mounted cube matrix: A large eddy simulation,” Int. J. Heat Fluid Flow, vol. 23, no. 2, pp. 173–185, Apr. 2002. DOI: https://doi.org/10.1016/S0142-727X(01)00147-3.
- S. Murakami, “Comparison of various turbulence models applied to a bluff body,” J. Wind. Eng. Ind. Aerodyn., vol. 46–47, pp. 21–36, Aug. 1993. DOI: https://doi.org/10.1016/B978-0-444-81688-7.50006-1.
- E. Pulat, M. K. Isman, A. B. Etemoglu, and M. Can, “Effect of turbulence models and near-wall modeling approaches on numerical results in impingement heat transfer,” Numer. Heat Transfer Part B: Fundam., vol. 60, no. 6, pp. 486–519, Dec. 2011. DOI: https://doi.org/10.1080/10407790.2011.630956.
- J. Ortega-Casanova and S. Castillo-Sanchez, “On using axisymmetric turbulent impinging jets swirling as Burger’s vortex for heat transfer applications. Single and multi-objective vortex parameters optimization,” Appl. Therm. Eng., vol. 121, pp. 103–114, Apr. 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.04.031.
- N. Zuckerman and N. Lior, “Jet impingement heat transfer: Physics, correlations, and numerical modeling,” Adv. Heat Transf., vol. 39, pp. 565–631, May 2008. DOI: https://doi.org/10.1016/S0065-2717(06)39006-5.
- F. Bazdidi-Tehrani, S. Mirzaei, and M. S. Abedinejad, “Influence of chemical mechanisms on spray combustion characteristics of turbulent flow in a wall jet can combustor,” Energy Fuels, vol. 31, no. 7, pp. 7523–7539, Jun. 2017. DOI: https://doi.org/10.1021/acs.energyfuels.7b00441.
- M. Leschziner, “Modelling turbulent separated flow in the context of aerodynamic applications,” Fluid Dyn. Res., vol. 38, no. 2–3, pp. 174–210, Feb. 2006. DOI: https://doi.org/10.1016/j.fluiddyn.2004.11.004.