References
- S. M. A. Noori Rahim Abadi, J. P. Meyer and J. Dirker, “Effect of inclination angle on the condensation of R134a inside inclined smooth tube,” Chem. Eng. Res. Des., vol. 132, pp. 346–357, 2018. DOI: https://doi.org/10.1016/j.cherd.2018.01.044.
- S. M. A. Noori Rahim Abadi, M. Mehrabi and J. P. Meyer, “Numerical study of steam condensation inside a long, inclined, smooth tube at different saturation temperatures,” Int. J. Heat Mass Transf., vol. 126, pp. 15–25, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.05.136.
- X. Gu, J. Wen, X. Zhang, C. Wang and S. Wang, “Effect of tube shape on the condensation patterns of R1234ze(E) in horizontal mini-channels,” Int. J. Heat Mass Transf., vol. 131, pp. 121–139, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.09.069.
- L. Viscito, S. Lips and R. Revellin, “Global analysis and development of a predictive tool of the effect of tube inclination on two-phase heat transfer: Boiling, condensation and heated gas-liquid flows,” Appl. Therm. Eng., vol. 162, pp. 114300, 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2019.114300.
- Z. C. Sun, X. Ma, L. X. Ma, W. Li and D. J. Kukulka, “Flow boiling heat transfer characteristics in horizontal, three-dimensional enhanced tubes,” Energies, vol. 12, no. 5, pp. 927, 2019. DOI: https://doi.org/10.3390/en12050927.
- Z. Li, S. Q. Liu, J. H. Zhang and L. Zhang, “Evaporation heat transfer of R134a on outside of smooth and enhanced tubes,” Heat Transf. Eng., vol. 42, no. 9, 2021 (in press). DOI: https://doi.org/10.1080/01457632.2020.1735792.
- S. G. Mohseni and M. A. Akhavan-Behabadi, “Visual study of flow patterns during condensation inside a microfin tube with different tube inclinations,” Int. Commun. Heat Mass Transf., vol. 38, no. 8, pp. 1156–1161, 2011. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2011.04.032.
- H. Mashouf, M. Shafaee, A. Sarmadian and S. G. Mohseni, “Visual study of flow patterns during evaporation and condensation of R-600a inside horizontal smooth and helically dimpled tubes,” Appl. Therm. Eng., vol. 124, pp. 1392–1400, 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.06.125.
- S. Wongwises, T. Wongchang, J. Kaewon and C. C. Wang, “A visual study of two-phase flow patterns of HFC-134a and lubricant oil mixtures,” Heat Transf. Eng, vol. 23, no. 4, pp. 13–22, 2002. DOI: https://doi.org/10.1080/01457630290090464.
- S. F. Y. Motta, A. R. Parise José and S. L. Braga, “A visual study of R-404A/oil flow through adiabatic capillary tubes,” Int. J. Refrig., vol. 25, no. 5, pp. 586–596, 2002. DOI: https://doi.org/10.1016/S0140-7007(01)00057-3.
- J. Zhou, et al., “Experimental study on vertically upward steam-water two-phase flow patterns in narrow rectangular channel,” Nucl. Eng. Technol., vol. 53, no. 1, pp. 61–68, 2021. DOI: https://doi.org/10.1016/j.net.2020.06.003.
- J. Y. Liu, J. P. Liu and X. Xu, “Diabatic visualization study of R245fa two phase flow pattern characteristics in horizontal smooth and microfin tube,” Int. J. Heat Mass Transf., vol. 152, pp. 119513, 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.119513.
- N. P. Ekberg, S. M. Ghiaasiaan, S. I. Abdel-Khalik, M. Yoda and S. M. Jeter, “Gas–liquid two-phase flow in narrow horizontal annuli,” Nucl. Eng. Des., vol. 192, no. 1, pp. 59–80, 1999. DOI: https://doi.org/10.1016/S0029-5493(99)00078-3.
- W. Y. Tang, D. J. Kukulka, W. Li and R. Smith, “Comparison of the evaporation and condensation heat transfer coefficients on the external surface of tubes in the annulus of a tube-in-tube heat exchanger,” Energies, vol. 13, no. 4, pp. 952, 2020. DOI: https://doi.org/10.3390/en13040952.
- Z. C. Sun, W. Li, X. Ma, Z. Ayub and Y. He, “Flow boiling in horizontal annuli outside horizontal smooth, herringbone and three-dimensional enhanced tubes,” Int. J. Heat Mass Transf., vol. 143, pp. 118554, 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118554.
- W. Li, X. Chen, J. X. Chen, Z. C. Sun and T. W. Simon, “Shell-side flow condensation of R410A on horizontal tubes at low-mass fluxes,” J. Heat Transfer., vol. 139, no. 1, pp. 1–9, 2016. DOI: https://doi.org/10.1115/1.4034552.
- R. J. Moffat, “Describing the uncertainties in experimental results,” Exp. Therm. Fluid Sci., vol. 1, no. 1, pp. 3–17, 1988. DOI: https://doi.org/10.1016/0894-1777(88)90043-X.
- V. Gnielinski, “New equations for heat and mass transfer in turbulent pipe and channel flow,” Int. Chem. Eng., vol. 16, no. 2, pp. 8–16, 1976. DOI: https://doi.org/10.1021/i360060a018.
- E. E. Wilson, “A basis for rational design of heat transfer apparatus,” J. Am. Soc. Mech. Eng., vol. 37, no. 1, pp. 47–70, 1915.
- B. S. Petukhov, “Heat transfer and friction in turbulent pipe flow with variable physical properties,” Adv. Heat Transfer., vol. 6, no. 503, pp. 503–564, 1970. DOI: https://doi.org/10.1016/S0065-2717(08)70153-9.
- S. Z. Rouhani and E. Axelsson, “Calculation of void volume fraction in the subcooled and quality boiling regions,” Int. J. Heat Mass Transf., vol. 13, no. 2, pp. 383–393, 1970. DOI: https://doi.org/10.1016/0017-9310(70)90114-6.
- F. W. Dittus and L. Boelter, “Heat transfer in automobile radiators of the tubular type,” Int. Commun. Heat Mass Transfer., vol. 12, no. 1, pp. 3–22, 1985. DOI: https://doi.org/10.1016/0735-1933(85)90003-X.
- W. Nusselt, “Die oberflachenkondensation des wasserdampfes,” Energy, vol. 60, pp. 541–569, 1916.
- V. K. Dhir and J. Lienhard, “Laminar film condensation on plane and axisymmetric bodies in nonuniform gravity,” J. Heat Transfer., vol. 93, no. 1, pp. 97–100, 1971. DOI: https://doi.org/10.1115/1.3449773.
- K. E. Gungor and R. H. S. Winterton, “Simplified general correlation for saturated flow boiling and comparisons of correlations with data,” Chem. Eng. Res. Des., vol. 65, no. 2, pp. 254–260, 1987.
- S. G. Kandlikar and P. Balasubramanian, “An extension of the flow boiling correlation to transition, laminar, and deep laminar flows in minichannels and microchannels,” Heat Transf. Eng., vol. 25, no. 3, pp. 86–93, 2004. DOI: https://doi.org/10.1080/01457630490280425.
- G. M. Lazarek and S. H. Black, “Evaporative heat transfer, pressure drop and critical heat flux in a small vertical tube with R-113,” Int. J. Heat Mass Transfer., vol. 25, no. 7, pp. 945–960, 1982. DOI: https://doi.org/10.1016/0017-9310(82)90070-9.
- L. Sun and K. Mishima, “An evaluation of prediction methods for saturated flow boiling heat transfer in mini-channels,” Int. J. Heat Mass Transfer., vol. 52, no. 23–24, pp. 5323–5329, 2009. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2009.06.041.
- P. A. Kew and K. Cornwell, “Correlations for the prediction of boiling heat transfer in small-diameter channels,” Appl. Therm. Eng., vol. 17, no. 8–10, pp. 705–715, 1997. DOI: https://doi.org/10.1016/S1359-4311(96)00071-3.
- D. R. H. Beattie and P. B. Whalley, “A simple two-phase frictional pressure drop calculation method,” Int. J. Multiph. Flow, vol. 8, no. 1, pp. 83–87, 1982. DOI: https://doi.org/10.1016/0301-9322(82)90009-X.