Passage Arrangement Optimization of Plate-Fin Heat Exchanger under Uncertain Operating Conditions

References

• R. K. Shah and D. P. Sekulic, Fundamentals of Heat Exchanger Design. Hoboken, NJ: John Wiley & Sons, Inc, 2003.
   Google Scholar
• X. Peng, Z. Y. Liu, C. Qiu and J. R. Tan, “Passage arrangement design for multi-stream plate-fin heat exchanger under multiple operating conditions,” Int. J. Heat Mass Transfer, vol. 77, pp. 1055–1062, Oct. 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.06.058.
   Web of Science ®Google Scholar
• B. H. Ke, et al., “Analysis exploring the uniformity of flow distribution in multi-channels for the application of printed circuit heat exchangers," Symmetry, vol. 12, no. 2, p. 314, 2020. DOI: 10.3390/sym12020314.
   Google Scholar
• T. Ma, P. Zhang, H. N. Shi, Y. T. Chen and Q. W. Wang, “Prediction of flow maldistribution in printed circuit heat exchanger,” Int. J. Heat Mass Transfer, vol. 152, p. 119560, May 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.119560.
   Web of Science ®Google Scholar
• R. Niroomand, M. H. Saidi and S. K. Hannani, “A quasi-three-dimensional thermal model for multi-stream plate fin heat exchangers,” Appl. Therm. Eng., vol. 157, p. 113730, Jul. 2019. DOI: 10.1016/j.applthermaleng.2019.113730.
   Web of Science ®Google Scholar
• S. Kumar and P. K. Singh, “A novel approach to manage temperature non-uniformity in minichannel heat sink by using intentional flow maldistribution,” Appl. Therm. Eng., vol. 163, p. 114403, Dec. 2019. DOI: 10.1016/j.applthermaleng.2019.114403.
   Web of Science ®Google Scholar
• B. D. Raja, R. L. Jhala and V. Patel, “Many-objective optimization of cross-flow plate-fin heat exchanger,” Int. J. Therm. Sci., vol. 118, pp. 320–339, Aug. 2017. DOI: 10.1016/j.ijthermalsci.2017.05.005.
   Web of Science ®Google Scholar
• Z. Wang, F. H. Han, B. Sundén and Y. Z. Li, “A thermal design method for the performance optimization of multi-stream plate-fin heat exchangers,” J. Mech. Sci. Technol., vol. 31, no. 6, pp. 3017–3024, 2017. DOI: 10.1007/s12206-017-0545-y.
   Web of Science ®Google Scholar
• H. T. Hu and J. R. Li, “Experimental investigation on heat transfer characteristics of two-phase flow boiling in offset strip fin channels of plate-fin heat exchangers,” Appl. Therm. Eng., vol. 185, p. 116404, Feb. 2021. DOI: 10.1016/j.applthermaleng.2020.116404.
   Web of Science ®Google Scholar
• J. L. Huang, T. Jin, M. L. Liang and H. L. Chen, “Prediction of heat exchanger performance in cryogenic oscillating flow conditions by support vector machine,” Appl. Therm. Eng., vol. 182, p. 116053, Jan. 2021. DOI: 10.1016/j.applthermaleng.2020.116053.
   Web of Science ®Google Scholar
• W. M. Chin and V. R. Raghavan, “The influence of the moments of probability density function for flow maldistribution on the thermal performance of a fin-tube heat exchanger,” Int. J. Therm. Sci., vol. 50, no. 10, pp. 1942–1953, 2011. DOI: 10.1016/j.ijthermalsci.2011.04.014.
   Web of Science ®Google Scholar
• P. Blecich, “Experimental investigation of the effects of airflow nonuniformity on performance of a fin-and-tube heat exchanger,” Int. J. Refrig., vol. 59, pp. 65–74, Nov. 2015. DOI: 10.1016/j.ijrefrig.2015.06.029.
   Web of Science ®Google Scholar
• S. De Schampheleire, K. De Kerpel, B. Ameel, H. Huisseune and M. De Paepe, “Thermal analysis of a commercial plate fin heat exchanger with nonuniform inlet flow conditions,” Heat Transfer Eng., vol. 37, no. 17, pp. 1466–1477, 2016. DOI: 10.1080/01457632.2016.1142316.
   Web of Science ®Google Scholar
• H. Z. Yang, et al., “A mathematical model for flow maldistribution study in a parallel plate-fin heat exchanger,” Appl. Therm. Eng., vol. 121, pp. 462–472, Jan. 2017. DOI: 10.1016/j.applthermaleng.2017.03.130.
   Web of Science ®Google Scholar
• X. Peng, D. H. Li, J. Q. Li, S. F. Jiang and Q. L. Gao, “Improvement of flow distribution by new inlet header configuration with splitter plates for plate-fin heat exchanger,” Energies, vol. 13, no. 6, p. 1323, 2020. DOI: 10.3390/en13061323.
   Web of Science ®Google Scholar
• H. Shokouhmand and M. Hasanpour, “Effect of number of plates on the thermal performance of a plate heat exchanger with considering flow maldistribution,” J. Energy Storage, vol. 32, pp. 101907, Dec. 2020. DOI: 10.1016/j.est.2020.101907.
   Web of Science ®Google Scholar
• Z. Zhang, S. Mehendale, J. J. Tian and Y. Z. Li, “Fluid flow distribution and heat transfer in plate-fin heat exchangers,” Heat Transfer Eng., vol. 36, no. 9, pp. 806–819, 2015. DOI: 10.1080/01457632.2015.963411.
   Web of Science ®Google Scholar
• H. S. Shao, M. Zhang, Q. X. Zhao, Y. G. Wang and Z. Y. Liang, “Study of improvements on flow maldistribution of double tube-passes shell-and-tube heat exchanger with rectangular header,” Appl. Therm. Eng., vol. 144, pp. 106–116, Nov. 2018. DOI: 10.1016/j.applthermaleng.2018.08.014.
   Web of Science ®Google Scholar
• X.-C. Tu, Y. T. Wu and H.-B. Kim, “Improvement of two-phase flow distribution in the header of a plate-fin heat exchanger,” Int. J. Heat Mass Transfer, vol. 123, pp. 523–533, Aug. 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.03.001.
   Web of Science ®Google Scholar
• W-x Chu, K. Bennett, J. Cheng, Y-t Chen and Q-w Wang, “Numerical study on a novel hyperbolic inlet header in straight-channel printed circuit heat exchanger,” Appl. Therm. Eng., vol. 146, pp. 805–814, Jan. 2019. DOI: 10.1016/j.applthermaleng.2018.10.027.
   Web of Science ®Google Scholar
• T. S. Khan, M. S. Khan, M.-C. Chyu and Z. H. Ayub, “Experimental investigation of single-phase convective heat transfer coefficient in a corrugated plate heat exchanger for multiple plate configurations,” Appl. Therm. Eng., vol. 30, no. 8–9, pp. 1058–1065, 2010. DOI: 10.1016/j.applthermaleng.2010.01.021.
   Web of Science ®Google Scholar
• W. Yaïci, M. Ghorab and E. Entchev, “3D CFD analysis of the effect of inlet air flow maldistribution on the fluid flow and heat transfer performances of plate-fin-and-tube laminar heat exchangers,” Int. J. Heat Mass Transfer, vol. 74, pp. 490–500, Jul. 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.03.034.
   Web of Science ®Google Scholar
• G. Jain, S. Chaudhary, P. K. Gupta and P. K. Kush, “Flow mal-distribution study in cryogenic counter-flow plate fin heat exchangers,” IOP Conf. Ser.: Mater. Sci. Eng., vol. 171, pp. 012014, Mar. 2017. DOI: 10.1088/1757-899X/171/1/012014.
   Google Scholar
• M. Goyal, A. Chakravarty and M. D. Atrey, “Two-dimensional model for multi stream plate fin heat exchangers,” Cryogenics, vol. 61, pp. 70–78, May–Jun. 2014. DOI: 10.1016/j.cryogenics.2014.02.017.
   Web of Science ®Google Scholar
• Z. Wang and Y. Z. Li, “Layer pattern thermal design and optimization for multi stream plate-fin heat exchangers—A review,” Renewable Sustainable Energy Rev., vol. 53, pp. 500–514, Jan. 2016. DOI: 10.1016/j.rser.2015.09.003.
   Web of Science ®Google Scholar
• R. X. Li, J. P. Liu and X. W. Xu, “Development and validation of a direct passage arrangement method for multi stream plate fin heat exchangers,” Appl. Therm. Eng., vol. 130, pp. 1266–1278, Feb. 2018. DOI: 10.1016/j.applthermaleng.2017.11.054.
   Web of Science ®Google Scholar
• P. Haider, P. Freko, T. Acher, S. Rehfeldt and H. Klein, “A transient three-dimensional model for thermo-fluid simulation of cryogenic plate-fin heat exchangers,” Appl. Therm. Eng., vol. 180, p. 115791, Nov. 2020. DOI: 10.1016/j.applthermaleng.2020.115791.
   Web of Science ®Google Scholar
• I. Ghosh, S. K. Sarangi and P. K. Das, “An alternate algorithm for the analysis of multi stream plate fin heat exchangers,” Int. J. Heat Mass Transfer, vol. 49, no. 17–18, pp. 2889–2902, Aug. 2006. DOI: 10.1016/j.ijheatmasstransfer.2005.12.022.
   Web of Science ®Google Scholar
• X. Cui, K. J. Chua, M. R. Islam and W. M. Yang, “Fundamental formulation of a modified LMTD method to study indirect evaporative heat exchangers,” Energy Convers. Manage., vol. 88, pp. 372–381, Dec. 2014. DOI: 10.1016/j.enconman.2014.08.056.
   Web of Science ®Google Scholar
• A. D. Tharkar and S. P. Mahulikar, “The mean temperature difference method for micro heat exchanger analysis considering property variation,” Heat Transfer Eng., vol. 40, no. 8, pp. 605–615, 2019. DOI: 10.1080/01457632.2018.1436510.
   Web of Science ®Google Scholar
• M. Zhao and Y. Z. Li, “New integral-mean temperature difference model for thermal design and simulation of parallel three-fluid heat exchanger,” Int. J. Therm. Sci., vol. 59, pp. 203–213, Sep. 2012. DOI: 10.1016/j.ijthermalsci.2012.04.019.
   Web of Science ®Google Scholar
• S. Ghosh, I. Ghosh, D. K. Pratihar, B. Maiti and P. K. Das, “Optimum stacking pattern for multi-stream plate-fin heat exchanger through a genetic algorithm,” Int. J. Therm. Sci., vol. 50, no. 2, pp. 214–224, 2011. DOI: 10.1016/j.ijthermalsci.2010.07.003.
   Web of Science ®Google Scholar
• Z. Wang, Y. Z. Li and M. Zhao, “Experimental investigation on the thermal performance of multi-stream plate-fin heat exchanger based on genetic algorithm layer pattern design,” Int. J. Heat Mass Transfer, vol. 82, pp. 510–520, Mar. 2015. DOI: 10.1016/j.ijheatmasstransfer.2014.11.036.
   Web of Science ®Google Scholar
• M. Zhao and Y. Z. Li, “An effective layer pattern optimization model for multi-stream plate-fin heat exchanger using genetic algorithm,” Int. J. Heat Mass Transfer, vol. 60, pp. 480–489, May. 2013. DOI: 10.1016/j.ijheatmasstransfer.2012.12.041.
   Web of Science ®Google Scholar
• Q. Q. Tian, G. G. He, L. S. Zhao, D. H. Cai and L. P. Chen, “Passage arrangement optimization of multi-stream plate-fin heat exchangers,” Appl. Therm. Eng., vol. 73, no. 1, pp. 963–974, 2014. DOI: 10.1016/j.applthermaleng.2014.08.055.
   Web of Science ®Google Scholar
• X. Peng, Z. Y. Liu, C. Qiu and J. R. Tan, “Effect of inlet flow maldistribution on the passage arrangement design of multi-stream plate-fin heat exchanger,” Appl. Therm. Eng., vol. 103, pp. 67–76, Jun. 2016. DOI: 10.1016/j.applthermaleng.2016.04.072.
   Web of Science ®Google Scholar
• D.-H. Cho, S.-K. Seo, C.-J. Lee and Y. Lim, “Optimization of layer patterning on a plate fin heat exchanger considering abnormal operating conditions,” Appl. Therm. Eng., vol. 127, pp. 1036–1048, Dec. 2017. DOI: 10.1016/j.applthermaleng.2017.08.084.
   Web of Science ®Google Scholar