Inverse Estimation of Transient Heat Flux Using Sequential Function Specification Method

References

• P. Heidrich, J. V. Wolfersdorf, and M. Schnieder, “Experimental study of heat transfer in gas turbine blades using a transient inverse technique,” Heat Transf. Eng., vol. 30, no. 13, pp. 1077–1086, 2009. DOI: 10.1080/01457630902922236.
   Web of Science ®Google Scholar
• X. D. Xiao, X. Tong, Y. Li, S. M. Wei, and G. Q. Gao, “Automatic numerical determination of peening stress from objective shape,” Inverse Probl. Sci. Eng., vol. 26, no. 11, pp. 1633–1655, 2018. DOI: 10.1080/17415977.2017.1423294.
   Web of Science ®Google Scholar
• K. Das and S. C. Mishra, “Estimation of tumor characteristics in a breast tissue with known skin surface temperature,” J. Therm. Biol., vol. 38, no. 6, pp. 311–317, 2013. DOI: 10.1016/j.jtherbio.2013.04.001.
   Web of Science ®Google Scholar
• Y. T. Ren, H. Qi, Q. Chen, and L. M. Ruan, “Thermal dosage investigation for optimal temperature distribution in gold nanoparticle enhanced photothermal therapy,” Int. J. Heat Mass Transf., vol. 106, no. 106, pp. 212–221, 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.10.067.
   Web of Science ®Google Scholar
• G. Ribatski and J. R. Thome, “Two-phase flow and heat transfer across horizontal tube bundles—a review,” Heat Transf. Eng., vol. 28, no. 6, pp. 508–524, 2007. DOI: 10.1080/01457630701193898.
   Web of Science ®Google Scholar
• A. Kaya, M. Lazova, G. Kosmadakis, S. Lecompte, and M. De Paepe, “Evaluation of existing heat transfer correlations in designing helical coil evaporators for low-temperature organic Rankine cycles via inverse design approach,” Heat Transf. Eng., vol. 40, no. 13-14, pp. 1137–1152, 2019. DOI: 10.1080/01457632.2018.1457250.
   Web of Science ®Google Scholar
• S. Huang, B. Tao, J. Li, Y. Fan, and Z. Yin, “On-line estimation of the tool-chip interface temperature field during turning using a sequential inverse method,” Int. J. Adv. Manuf. Technol., vol. 97, no. 1–4, pp. 939–952, 2018. DOI: 10.1007/s00170-018-1987-9.
   Web of Science ®Google Scholar
• A. Khosravifard, A. Razavi, and M. R. Hematiyan, “An inverse meshfree method for heat flux identification based on strain measurement,” Int. J. Therm. Sci., vol. 144, pp. 50–66, Oct. 2019. DOI: 10.1016/j.ijthermalsci.2019.06.001.
   Web of Science ®Google Scholar
• V. A. Morozov, “Numerical realization of the optimal discrepancy method,” USSR Comput. Math. Math. Phys., vol. 16, no. 6, pp. 194–198, 1976. DOI: 10.1016/0041-5553(76)90055-0.
   Google Scholar
• M. A. Lukas, F. R. de Hoog, and R. S. Anderssen, “Efficient algorithms for robust generalized cross-validation spline smoothing,” J. Comput. Appl. Math., vol. 235, no. 1, pp. 102–107, 2010. DOI: 10.1016/j.cam.2010.05.016.
   Web of Science ®Google Scholar
• M. Rezghi and S. M. Hosseini, “A new variant of L-curve for Tikhonov regularization,” J. Comput. Appl. Math., vol. 231, no. 2, pp. 914–924, 2009. DOI: 10.1016/j.cam.2009.05.016.
   Web of Science ®Google Scholar
• Z. Guo, T. Lu, and B. Liu, “Inverse heat conduction estimation of inner wall temperature fluctuations under turbulent penetration,” J. Therm. Sci., vol. 26, no. 2, pp. 160–165, 2017. DOI: 10.1007/s11630-017-0925-8.
   Web of Science ®Google Scholar
• Z. Guo et al., “Monitoring of wall temperature fluctuations for thermal fatigue in a horizontal mixing T-junction pipe,” Prog. Nucl. Energy, vol. 104, pp. 298–305, Apr. 2018. DOI: 10.1016/j.pnucene.2017.10.011.
   Web of Science ®Google Scholar
• C.-H. Huang and C. C. Shih, “A shape identification problem in estimating simultaneously two interfacial configurations in a multiple region domain,” Appl. Therm. Eng., vol. 26, no. 1, pp. 77–88, 2006. DOI: 10.1016/j.applthermaleng.2005.04.019.
   Web of Science ®Google Scholar
• H. Razzaghi, F. Kowsary, and M. Ashjaee, “Derivation and application of the adjoint method for estimation of both spatially and temporally varying convective heat transfer coefficient,” Appl. Therm. Eng., vol. 154, pp. 63–75, May 2019. DOI: 10.1016/j.applthermaleng.2019.03.068.
   Web of Science ®Google Scholar
• M. Cui, K. Yang, X.-L. Xu, S.-D. Wang, and X.-W. Gao, “A modified Levenberg–Marquardt algorithm for simultaneous estimation of multi-parameters of boundary heat flux by solving transient nonlinear inverse heat conduction problems,” Int. J. Heat Mass Transf., vol. 97, pp. 908–916, Jan. 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.02.085.
   Web of Science ®Google Scholar
• M. Hafid and M. Lacroix, “Inverse method for simultaneously estimating multi-parameters of heat flux and of temperature-dependent thermal conductivities inside melting furnaces,” Appl. Therm. Eng., vol. 141, pp. 981–989, Aug. 2018. DOI: 10.1016/j.applthermaleng.2018.06.041.
   Web of Science ®Google Scholar
• J. M. Mulcahy et al., “Heat flux estimation of a plasma rocket helicon source by solution of the inverse heat conduction problem,” Int. J. Heat Mass Transf., vol. 52, no. 9–10, pp. 2343–2357, 2009. DOI: 10.1016/j.ijheatmasstransfer.2008.10.031.
   Web of Science ®Google Scholar
• F. Mohebbi, M. Sellier, and T. Rabczuk, “Estimation of linearly temperature-dependent thermal conductivity using an inverse analysis,” Int. J. Therm. Sci., vol. 117, pp. 68–76, Jul. 2017. DOI: 10.1016/j.ijthermalsci.2017.03.016.
   Web of Science ®Google Scholar
• M. Cui, Y. Zhao, B. Xu, and X.-W. Gao, “A new approach for determining damping factors in Levenberg-Marquardt algorithm for solving an inverse heat conduction problem,” Int. J. Heat Mass Transf., vol. 107, pp. 747–754, Apr. 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.11.101.
   Web of Science ®Google Scholar
• S. C. Sun, G. J. Wang, H. Chen, and D. Q. Zhang, “An inverse method for the reconstruction of thermal boundary conditions of semitransparent medium,” Int. J. Heat Mass Transf., vol. 134, pp. 574–585, May 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.01.059.
   Web of Science ®Google Scholar
• S. C. Sun, “Simultaneous reconstruction of thermal boundary condition and physical properties of participating medium,” Int. J. Therm. Sci., vol. 163, p. 106853, May 2021. DOI: 10.1016/j.ijthermalsci.2021.106853.
   Web of Science ®Google Scholar
• H. Qi, C.-Y. Niu, S. Gong, Y.-T. Ren, and L.-M. Ruan, “Application of the hybrid particle swarm optimization algorithms for simultaneous estimation of multi-parameters in a transient conduction–radiation problem,” Int. J. Heat Mass Transf., vol. 83, pp. 428–440, Apr. 2015. DOI: 10.1016/j.ijheatmasstransfer.2014.12.022.
   Web of Science ®Google Scholar
• C. K. Chen, L. W. Wu, and Y. T. Yang, “Comparison of whole-domain and sequential algorithms for function specification method in the inverse heat transfer problem of laminar convective pipe flow,” Numer. Heat Transf. A Appl., vol. 50, no. 10, pp. 927–947, 2006. DOI: 10.1080/10407780600671676.
   Web of Science ®Google Scholar
• J. Zueco, F. Alhama, and C. F. G. Fernandez, “Inverse problem of estimating time-dependent heat transfer coefficient with the network simulation method,” Commun. Numer. Methods Eng., vol. 21, no. 1, pp. 39–48, 2004. DOI: 10.1002/cnm.726.
   Web of Science ®Google Scholar
• S. Kumar and A. Tariq, “Effects of contact-nature on transient thermal contact conductance,” Int. J. Therm. Sci., vol. 137, pp. 299–312, Mar. 2019. DOI: 10.1016/j.ijthermalsci.2018.11.029.
   Web of Science ®Google Scholar
• G. Wang, L. Zhang, X. Wang, and B. L. Tai, “An inverse method to reconstruct the heat flux produced by bone grinding tools,” Int. J. Therm. Sci., vol. 101, pp. 85–92, Mar. 2016. DOI: 10.1016/j.ijthermalsci.2015.10.021.
   Web of Science ®Google Scholar
• M. Baghban, Z. Shams, and A. Ebrahimifakhar, “Inverse analysis of a porous fin to estimate time-dependent base temperature,” J. Thermophys. Heat Transf., vol. 32, no. 1, pp. 27–34, 2018. DOI: 10.2514/1.T5004.
   Web of Science ®Google Scholar
• S. C. Sun, G. J. Wang, and H. Chen, “Application of improved decentralized fuzzy inference methods for estimating the thermal boundary condition of participating medium,” Int. J. Therm. Sci., vol. 149, p. 106216, Mar. 2020. DOI: 10.1016/j.ijthermalsci.2019.106216.
   Web of Science ®Google Scholar
• S. T. Thynell, “Discrete-ordinates method in radiative heat transfer,” Int. J. Eng. Sci., vol. 36, no. 12-14, pp. 1651–1675, 1998. DOI: 10.1016/S0020-7225(98)00052-4.
   Web of Science ®Google Scholar
• S. Andre and A. Degiovanni, “A new way of solving transient radiative-conductive heat transfer problems,” J. Heat Transf. Trans. ASME, vol. 120, no. 4, pp. 943–955, 1998. DOI: 10.1115/1.2825914.
   Web of Science ®Google Scholar
• J. V. Beck, B. Blackwell, and C. R. St. Clair, Inverse Heat Conduction: Ill-Posed Problems. New York: Wiley-Interscience, 1985,
   Google Scholar
• S. C. Sun, Y. L. Ji, Z. H. Chang, G. J. Wang, and L. Y. Wei, “Application of stochastic particle swarm optimization algorithm for noninvasive determination of temperature-dependent thermal properties of biological tissue,” Heat Transf. Res., vol. 53, no. 11, pp. 45–60, 2022. DOI: 10.1615/HeatTransRes.v53.i11.40.
   Web of Science ®Google Scholar