Entropy Generation of Two-Phase Flow Boiling in Elliptical U-Bend Tube Heat Exchanger

References

• D. Deng, R. Wang, S. Xie, and P. Liu, “Flow pattern and its transition of nitrogen gas–water two-phase flow in U-tubes and inverted U-tubes,” Heat Mass Transf., vol. 51, no. 1, pp. 85–94, Jul. 2014. DOI: 10.1007/s00231-014-1395-0.
   Web of Science ®Google Scholar
• K. Usui, S. Aoki, and A. Inoue, “Flow behavior and pressure drop of two-phase flow through C-shaped bend in vertical plane, (I) upward flow,” J. Nucl. Sci. Technol., vol. 17, no. 12, pp. 875–887, Mar. 2012. DOI: 10.1080/18811248.1980.9732670.
   Google Scholar
• B. Lotfi, B. Sundén, and Q. Wang, “An investigation of the thermo-hydraulic performance of the smooth wavy fin-and-elliptical tube heat exchangers utilizing new type vortex generators,” Appl. Energy, vol. 162, pp. 1282–1302, Jan. 2016. DOI: 10.1016/j.apenergy.2015.07.065.
   Web of Science ®Google Scholar
• L. Sun, L. Yang, L. Shao, and C. Zhang, “Overall thermal performance oriented numerical comparison between elliptical and circular finned-tube condensers,” Int. J. Therm. Sci., vol. 89, pp. 234–244, Mar. 2015. DOI: 10.1016/j.ijthermalsci.2014.11.017.
   Web of Science ®Google Scholar
• L. Sun and C. Zhang, “Evaluation of elliptical finned-tube heat exchanger performance using CFD and response surface methodology,” Int. J. Therm. Sci., vol. 75, pp. 45–53, Jan. 2014. DOI: 10.1016/j.ijthermalsci.2013.07.021.
   Web of Science ®Google Scholar
• R. Deepakkumar and S. Jayavel, “Air side performance of finned-tube heat exchanger with combination of circular and elliptical tubes,” Appl. Therm. Eng., vol. 119, pp. 360–372, Jun. 2017. DOI: 10.1016/j.applthermaleng.2017.03.082.
   Web of Science ®Google Scholar
• S. Yogesh, A. Selvaraj, D. Ravi, and T. Rajagopal, “Heat transfer and pressure drop characteristics of inclined elliptical fin tube heat exchanger of varying ellipticity ratio using CFD code,” Int. J. Heat Mass Transf., vol. 119, pp. 26–39, Apr. 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.11.094.
   Web of Science ®Google Scholar
• E. Ibrahim and M. Moawed, “Forced convection and entropy generation from elliptic tubes with longitudinal fins,” Energy Convers. Manag., vol. 50, no. 8, pp. 1946–1954, Aug. 2009. DOI: 10.1016/j.enconman.2009.04.021.
   Web of Science ®Google Scholar
• B. Lotfi, M. Zeng, B. Sundén, and Q. Wang, “3D numerical investigation of flow and heat transfer characteristics in smooth wavy fin-and-elliptical tube heat exchangers using new type vortex generators,” Energy, vol. 73, pp. 233–257, Aug. 2014. DOI: 10.1016/j.energy.2014.06.016.
   Web of Science ®Google Scholar
• J. Jang and J. Yang, “Experimental and 3-D numerical analysis of the thermal-hydraulic characteristics of elliptic finned-tube heat exchangers,” Heat Transf. Eng., vol. 19, no. 4, pp. 55–67, 2007. DOI: 10.1080/01457639808939936.
   Google Scholar
• B. Lotfi and B. Sundén, “Thermo-hydraulic performance enhancement of finned elliptical tube heat exchangers by utilizing innovative dimple turbulators,” Heat Transf. Eng., vol. 41, no. 13, pp. 1117–1142, 2019. DOI: 10.1080/01457632.2019.1611132.
   Web of Science ®Google Scholar
• M. Omara and M. Abdelatief, “Experimental study of heat transfer and friction factor inside elliptic tube fixed with helical coils,” Appl. Therm. Eng., vol. 134, pp. 407–418, Apr. 2018. DOI: 10.1016/j.applthermaleng.2018.02.017.
   Web of Science ®Google Scholar
• T. Chandratilleke, N. Nadim, and R. Narayanaswamy, “Analysis of secondary flow instability and forced convection in fluid flow through rectangular and elliptical curved ducts,” Heat Transf. Eng., vol. 34, no. 14, pp. 1237–1248, 2013. DOI: 10.1080/01457632.2013.777249.
   Web of Science ®Google Scholar
• M. Yang, X. Wang, Z. Wang, Z. Li, and Y. Zhang, “Correlation for turbulent convection heat transfer in elliptical tubes by numerical simulations,” Front. Heat Mass Transf., vol. 11, no. 7, pp. 1–6, Apr. 2018. DOI: 10.5098/hmt.11.7.
   Google Scholar
• M. Shariat, A. Akbarinia, A. Nezhad, A. Behzadmehr, and R. Laur, “Numerical study of two phase laminar mixed convection nanofluid in elliptic ducts,” Appl. Therm. Eng., vol. 31, no. 14–15, pp. 2348–2359, Oct. 2011. DOI: 10.1016/j.applthermaleng.2011.03.035.
   Web of Science ®Google Scholar
• X. Zhu et al., “Experimental study on the heat and mass transfer characteristics of air-water two-phase flow in an evaporative condenser with a horizontal elliptical tube bundle,” Appl. Therm. Eng., vol. 168, p. 114825, Mar. 2020. DOI: 10.1016/j.applthermaleng.2019.114825.
   Web of Science ®Google Scholar
• H. Hu and C. Chen, “Forced convection in film condensation on a horizontal elliptical tube,” Heat Transf. Eng., vol. 27, no. 9, pp. 60–67, 2007. DOI: 10.1080/01457630600846141.
   Web of Science ®Google Scholar
• B. Ouzia, C. Marvillet, and M. Feidt, “Forced convective heat transfer of refrigerant 22 evaporating in upward and downward flow in U-bends,” Int. J. Refrig., vol. 17, no. 4, pp. 250–256, 1994. DOI: 10.1016/0140-7007(94)90041-8.
   Web of Science ®Google Scholar
• K. Cho and S. Tae, “Evaporation heat transfer for R-22 and R-407C refrigerant–oil mixture in a microfin tube with a U-bend,” Int. J. Refrig., vol. 23, no. 3, pp. 219–231, May 2000. DOI: 10.1016/S0140-7007(99)00051-1.
   Web of Science ®Google Scholar
• M. Meng and X. Peng, “Influence of U-bend heterogeneous effects on bubble dynamics and local flow boiling heat transfer in hairpin tubes,” Int. J. Therm. Sci., vol. 50, no. 10, pp. 2016–2026, Oct. 2011. DOI: 10.1016/j.ijthermalsci.2010.07.007.
   Web of Science ®Google Scholar
• T. Jatau and T. Bello-Ochende, “Heat transfer and flow pattern map development of R134A in a U-bend tube for flow boiling evaporation,” Int. Commun. Heat Mass Transf., vol. 128, pp. 105629, Nov. 2021. DOI: 10.1016/j.icheatmasstransfer.2021.105629.
   Web of Science ®Google Scholar
• R. Lima and J. Thome, “Two-phase pressure drops in adiabatic horizontal circular smooth U-bends and contiguous straight pipes (RP-1444),” HVAC&R Res., vol. 16, no. 3, pp. 383–397, Feb. 2011. DOI: 10.1080/10789669.2010.10390910.
   Google Scholar
• M. Padilla, R. Revellin, and J. Bonjour, “Prediction and simulation of two-phase pressure drop in return bends,” Int. J. Refrig., vol. 32, no. 7, pp. 1776–1783, Nov. 2009. DOI: 10.1016/j.ijrefrig.2009.06.006.
   Web of Science ®Google Scholar
• K. De Kerpel, S. De Schampheleire, T. De Keulenaer, and M. De Paepe, “Two-phase frictional pressure drop and flow behaviour up- and downstream of a sharp return bend,” Appl. Therm. Eng., vol. 93, pp. 824–838, Jan. 2016. DOI: 10.1016/j.applthermaleng.2015.10.064.
   Web of Science ®Google Scholar
• K. De Kerpel, S. De Schampheleire, T. De Keulenaer, and M. De Paepe, “Effect of the bend geometry on the two-phase frictional pressure drop and flow behaviour in the vicinity of the bend,” Appl. Therm. Eng., vol. 104, pp. 403–413, Jul. 2016. DOI: 10.1016/j.applthermaleng.2016.05.083.
   Web of Science ®Google Scholar
• 2013 ASHRAE Handbook – Fundamentals (SI Edition) – 30. Thermophysical Properties of Refrigerants (pp. 30.1–30.8). American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. Atlanta, GA, USA. [Online]. Available: https://app.knovel.com/hotlink/pdf/id:Kt00TYF7K1/ashrae-handbook-fundamentals/thermophysical-properties. Accessed: Jan. 21, 2020.
   Google Scholar
• S. Noori Rahim Abadi, J. Meyer, and J. Dirker, “Effect of inclination angle on the condensation of R134a inside an inclined smooth tube,” Chem. Eng. Res. Des., vol. 132, pp. 346–357, Apr. 2018. DOI: 10.1016/j.cherd.2018.01.044.
   Web of Science ®Google Scholar
• D. Ariyo and T. Bello-Ochende, “Constructal design of two-phase stacked microchannel heat exchangers for cooling at high heat flux,” Int. Commun. Heat Mass Transf., vol. 125, pp. 105294, Jun. 2021. DOI: 10.1016/j.icheatmasstransfer.2021.105294.
   Web of Science ®Google Scholar
• R. Zhuan and W. Wang, “Flow pattern of boiling in micro-channel by numerical simulation,” Int. J. Heat Mass Transf., vol. 55, pp. 5–6, Feb. 2012. pp17411753 DOI: 10.1016/j.ijheatmasstransfer.2011.11.029.
   Web of Science ®Google Scholar
• D. Lorenzini and Y. K. Joshi, “Computational fluid dynamics modeling of flow boiling in microchannels with nonuniform heat flux,” J. Heat Transf., vol. 140, no. 1, p. 011501, Jan. 2018. DOI: 10.1115/1.4037343.
   Web of Science ®Google Scholar
• J. Brackbill, D. Kothe, and C. Zemach, “A continuum method for modeling surface tension,” J. Comput. Phys., vol. 100, no. 2, pp. 335–354, Jun. 1992. DOI: 10.1016/0021-9991(92)90240-Y.
   Web of Science ®Google Scholar
• W. H. Lee, “A pressure iteration scheme for two-phase flow modelling,” Editor: T.N. Veziroglu. In Multiphase Transport Fundamentals, Reactor Safety, Applications. Washington, DC: Hemisphere Publishing, 1980.
   Google Scholar
• H. Mohammed, D. Giddings, and G. Walker, “CFD multiphase modelling of the acetone condensation and evaporation process in a horizontal circular tube,” Int. J. Heat Mass Transf., vol. 134, pp. 1159–1170, May 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.02.062.
   Web of Science ®Google Scholar
• ANSYS Fluent Theory Guide. Release 18.1. Canonsburg, PA: ANSYS Inc., 2017.
   Google Scholar
• A. Sciacovelli, V. Verda, and E. Sciubba, “Entropy generation analysis as a design tool—a review,” Renew. Sustain. Energy Rev., vol. 43, pp. 1167–1181, Mar. 2015. DOI: 10.1016/j.rser.2014.11.104.
   Web of Science ®Google Scholar
• R. Revellin and J. Bonjour, “Entropy generation during flow boiling of pure refrigerant and refrigerant–oil mixture,” Int. J. Refrig., vol. 34, no. 4, pp. 1040–1047, Jun. 2011. DOI: 10.1016/j.ijrefrig.2011.01.010.
   Web of Science ®Google Scholar
• L. Wojtan, T. Ursenbacher, and J. Thome, “Investigation of flow boiling in horizontal tubes: part II—development of a new heat transfer model for stratified-wavy, dryout and mist flow regimes,” Int. J. Heat Mass Transf., vol. 48, no. 14, pp. 2970–2985, Jul. 2005. DOI: 10.1016/j.ijheatmasstransfer.2004.12.013.
   Web of Science ®Google Scholar
• R. da Silva Lima, J. Quibén, and J. Thome, “Flow boiling in horizontal smooth tubes: New heat transfer results for R-134a at three saturation temperatures,” Appl. Therm. Eng., vol. 29, no. 7, pp. 1289–1298, May 2009. DOI: 10.1016/j.applthermaleng.2008.06.021.
   Web of Science ®Google Scholar