Research on Air-Duct Optimization and Temperature Uniformity Analysis of Domestic Frost-Free Refrigerator-Freezer

References

• T. Mahlia, H. Masjuki, R. Saidur and M. Amalina, “Cost-benefit analysis of implementing minimum energy efficiency standards for household refrigerator-freezers in Malaysia,” Energy Policy, vol. 32, no. 16, pp. 1819–1824, Nov. 2004. DOI: 10.1016/S0301-4215(03)00169-1.
   Web of Science ®Google Scholar
• M. Hasanuzzaman, R. Saidur and H. Masjuki, “Effects of operating variables on heat transfer and energy consumption of a household refrigerator-freezer during closed door operation,” Energy, vol. 34, no. 2, pp. 196–198, Feb. 2009. DOI: 10.1016/j.energy.2008.11.003.
   Web of Science ®Google Scholar
• F. Ghadiri and M. Rasti, “The effect of selecting proper refrigeration cycle components on optimizing energy consumption of the household refrigerators,” Appl. Therm. Eng., vol. 67, no. 1–2, pp. 335–340, Jun. 2014. DOI: 10.1016/j.applthermaleng.2014.03.024.
   Web of Science ®Google Scholar
• G. Sonnenrein, et al., “Improving the performance of household refrigerating appliances through the integration of phase change materials in the context of the new global refrigerator standard IEC 62552:2015,” Int. J. Refrig., vol. 119, pp. 448–456, Nov. 2020. DOI: 10.1016/j.ijrefrig.2020.07.025.
   Google Scholar
• Z. Zhu, K. Liang, Z. Li, H. Jiang and Z. Meng, “Thermal-economic-environmental analysis on household refrigerator using a variable displacement compressor and low-GWP refrigerants,” Int. J. Refrig., vol. 123, pp. 189–197, Mar. 2021. DOI: 10.1016/j.ijrefrig.2020.12.009.
   Google Scholar
• L. Wang, A. Roskilly and R. Wang, “Solar powered cascading cogeneration cycle with ORC and adsorption technology for electricity and refrigeration,” Heat Transf. Eng., vol. 35, no. 11–12, pp. 1028–1034, Jan. 2014. DOI: 10.1080/01457632.2013.863067.
   Web of Science ®Google Scholar
• G. Liu, G. Yan and J. Yu, “A review of refrigerator gasket: development trend, heat and mass transfer characteristics, structure and material optimization,” Renew. Sustain. Energy Rev., vol. 144, pp. 110975, Jul. 2021. DOI: 10.1016/j.rser.2021.110975.
   Web of Science ®Google Scholar
• G. Yan, Q. Chen and Z. Sun, “Numerical and experimental study on heat transfer characteristic and thermal load of the freezer gasket in frost-free refrigerators,” Int. J. Refrig., vol. 63, pp. 25–36, Mar. 2016. DOI: 10.1016/j.ijrefrig.2015.10.021.
   Web of Science ®Google Scholar
• J. S. Lim and A. Bejan, “Two fundamental problems of refrigerator thermal insulation design,” Heat Transf. Eng., vol. 15, no. 3, pp. 35–41, 1994. DOI: 10.1080/01457639408939829.
   Web of Science ®Google Scholar
• Y. Yoon, H. Jeong and K. Lee, “Adaptive defrost methods for improving defrosting efficiency of household refrigerator,” Energy Convers. Manage., vol. 157, pp. 511–516, Feb. 2018. DOI: 10.1016/j.enconman.2017.12.039.
   Web of Science ®Google Scholar
• R. Zhao, D. Huang, X. Peng and L. Qiao, “Comprehensive measures to enhance electric heater defrosting (EHD) performance for household frost-free refrigerators,” Int. J. Refrig., vol. 111, pp. 1–8, Mar. 2020. DOI: 10.1016/j.ijrefrig.2019.12.002.
   Google Scholar
• H. Jeong, S. Byun, D. Kim and K. Lee, “Power optimization for defrosting heaters in household refrigerators to reduce energy consumption,” Energy Convers. Manage., vol. 237, pp. 114127, Jun. 2021. DOI: 10.1016/j.enconman.2021.114127.
   Web of Science ®Google Scholar
• D. Özkan, E. Özil and C. İnan, “Experimental investigation of the defrosting process on domestic refrigerator finned tube evaporators,” Heat Transf. Eng., vol. 33, no. 6, pp. 548–557, 2012. DOI: 10.1080/01457632.2012.624867.
   Web of Science ®Google Scholar
• Z. Li, G. Ding, S. Miao and X. Han, “Development of novel air distributor for precise control of cooling capacity delivery in multi-storage chamber indirect cooling household refrigerators,” Int. J. Refrig., vol. 119, pp. 175–183, Jul. 2020. DOI: 10.1016/j.ijrefrig.2020.07.028.
   Google Scholar
• V. Lacerda, C. Melo, J. Barbosa and P. Duarte, “Measurements of the airflow field in the freezer storage chamber of a top-mount no-frost refrigerator: the effect of temperature,” Int. J. Refrig., vol. 28, no. 5, pp. 774–783, Aug. 2005. DOI: 10.1016/j.ijrefrig.2004.10.009.
   Web of Science ®Google Scholar
• X. Meng and B. Yu, “Experimental research on airflow performance at supply-air openings in frost-free refrigerator by DPIV,” Appl. Therm. Eng., vol. 29, no. 16, pp. 3334–3339, May 2009. DOI: 10.1016/j.applthermaleng.2009.05.009.
   Web of Science ®Google Scholar
• S.-H. Cho, I.-S. Lee, J.-H. Choi and Y.-S. Nam, “PIV measurement and numerical analysis of a new refrigeration storage chamber of a refrigerator,” Ann. N. Y. Acad. Sci., vol. 972, no. 1, pp. 260–264, Jan. 2002. DOI: 10.1111/j.1749-6632.2002.tb04582.x.
   PubMedGoogle Scholar
• G. Ding, H. Qiao and Z. Lu, “Ways to improve thermal uniformity inside a refrigerator,” Appl. Therm. Eng., vol. 24, no. 13, pp. 1827–1840, Sep. 2004. DOI: 10.1016/j.applthermaleng.2004.01.011.
   Web of Science ®Google Scholar
• J. Ye, X. Huang, Y. Cheng, J. Shao and Y. Zhang, “Air volume improvement in the duct system in frost-free refrigerators based on the CFD method,” J. Supercomput., vol. 76, no. 5, pp. 3749–3764, May 2020. DOI: 10.1007/s11227-018-2586-0.
   Web of Science ®Google Scholar
• K. Fukuyo, T. Tanaami and H. Ashida, “Thermal uniformity and rapid cooling inside refrigerators,” Int. J. Refrig., vol. 26, no. 2, pp. 249–255, Mar. 2003. DOI: 10.1016/S0140-7007(02)00039-7.
   Web of Science ®Google Scholar
• J. Gupta, M. Gopal and S. Chakraborty, “Modeling of a domestic frost-free refrigerator,” Int. J. Refrig., vol. 30, no. 2, pp. 311–322, Mar. 2007. DOI: 10.1016/j.ijrefrig.2006.06.006.
   Web of Science ®Google Scholar
• J. Belman-Flores, A. Gallegos-Muñoz and A. Puente-Delgado, “Analysis of the temperature stratification of a no-frost domestic refrigerator with bottom mount configuration,” APPl. Thermal Engineering, vol. 65, no. 1-2, pp. 299–307, Apr. 2014. DOI: 10.1016/j.applthermaleng.2014.01.022.
   Web of Science ®Google Scholar
• H. Avcı, D. Kumlutaş, Ö. Özer and M. Ozsen, “Optimization of the design parameters of a domestic refrigerator using CFD and artificial neural networks,” Int. J. Refrig., vol. 67, pp. 227–238, Jul. 2016. DOI: 10.1016/j.ijrefrig.2016.02.018.
   Web of Science ®Google Scholar
• E. Söylemez, E. Alpman, A. Onat and S. Hartomacioglu, “CFD analysis for predicting cooling time of a domestic refrigerator with thermoelectric cooling system,” Int. J. Refrig., vol. 123, pp. 138–149, Mar. 2021. DOI: 10.1016/j.ijrefrig.2020.11.012.
   Google Scholar
• K.-S. Yang, W.-R. Chang, I.-Y. Chen and C.-C. Wang, “An investigation of a top-mounted domestic refrigerator,” Energy Convers. Manage., vol. 51, no. 7, pp. 1422–1427, Jul. 2010. DOI: 10.1016/j.enconman.2010.01.016.
   Web of Science ®Google Scholar
• J. H. Wie, et al., “Temperature uniformity analysis of a domestic refrigerator with different multi-duct shapes,” Appl. Therm. Eng., vol. 188, pp. 116604, Apr. 2021. DOI: 10.1016/j.applthermaleng.2021.116604.
   Web of Science ®Google Scholar
• P. Cui, L. He and X. Mo, “Flow and heat transfer analysis of a domestic refrigerator with complex wall conditions,” Appl. Therm. Eng., vol. 209, pp. 118306, Jun. 2022. DOI: 10.1016/j.applthermaleng.2022.118306.
   Web of Science ®Google Scholar
• P. Cui, Y. Wang and Y. Tian, “A study on the leakage characteristics of frost-free refrigerator cabinet gasket,” J. Appl. Sci. Technol., vol. 6, pp. 80–84, Jun. 2019. (in Chinese). DOI: 10.19784/j.cnki.issn1672-0172.2019.06.012.
   Google Scholar
• Z. Ye and T. Zhu, “The improvement in the drawing method for the volute shape of centrifugal fan,” Chin. J. Turbomach., vol. 5, pp. 30–32 + 39, Oct. 2008. (in Chinese)
   Google Scholar