Performance Analysis on Single- and Double-Pass Ytterbium-Doped Fiber Amplifier in the 1 µm Region

References

• D. Z. Mohammed and A. H. Al-Janabi, “Passively Q-switched erbium doped fiber laser based on double walled carbon nanotubes-polyvinyl alcohol saturable absorber,” Laser Phys., vol. 26, no. 11, pp.115108, 2016. DOI: 10.1088/1054-660X/26/11/115108.
   Web of Science ®Google Scholar
• D. Z. Mohammed and A. H. Al-Janabi, “Large diameter coreless fiber as a saturable absorber for erbium doped fiber laser cavity based on multimode interference,” Opt. Fiber Technol., vol. 50, pp. 212–215, 2019. DOI: 10.1016/j.yofte.2019.04.002.
   Web of Science ®Google Scholar
• A. H. Al-Janabi and D. Z. Mohammed. “Stability evaluation of passively Q-switched erbium doped fiber laser based on double and multi-walled carbon nanotubes,” in Frontiers in Optics, 2017, pp. FTu5A. 4. OSA Publishing/ Washington, D.C. United States.
   Google Scholar
• W. A. Khaleel and A. H. Al-Janabi, “Erbium-doped fiber ring laser with wavelength selective filter based on nonlinear photonic crystal fiber Mach–Zehnder interferometer,” Laser Phys., vol. 27, pp. 105104, 2017. DOI: 10.1088/1555-6611/aa8287.
   Web of Science ®Google Scholar
• S. K. M. Al-Hayali, D. Z. Mohammed, W. A. Khaleel, and A. H. Al-Janabi, “Aluminum oxide nanoparticles as saturable absorber for C-band passively Q-switched fiber laser,” Appl. Opt., vol. 56, no. 16, pp.4720–4726, 2017. DOI: 10.1364/AO.56.004720.
   PubMed Web of Science ®Google Scholar
• A. Yeniay and R. Gao, “Single stage high power L-band EDFA with multiple C-band seeds,” Optical Fiber Communication Conference and Exhibit, Anaheim, CA, 2002, pp. 457–458. DOI: 10.1109/OFC.2002.1036482.
   Google Scholar
• E. Bochove, “Theory of beam combining of fiber lasers,” IEEE J. Quantum Electron., vol. 38, no. 5, pp.432–445, 2002. DOI: 10.1109/3.998614.
   Web of Science ®Google Scholar
• M. Ebrahim-Zadeh and S. Chaitanya Kumar, “Yb-fiber-laser-pumped ultrafast frequency conversion sources from the mid-infrared to the ultraviolet,” IEEE J. Sel. Top. Quantum, vol. 20, no. 5, pp.624–642, 2014. DOI: 10.1109/JSTQE.2014.2319590.
   Web of Science ®Google Scholar
• A. Giesen et al., “Scalable concept for diode-pumped high-power solid-state lasers,” Appl. Phys. B, vol. 58, no. 5, pp.365–372, 1994. DOI: 10.1007/BF01081875.
   Web of Science ®Google Scholar
• V. I. Makkaveev, “Optical amplifiers in optical fiber communications systems,” Proc. SPIE/Second International Conference on Lasers for Measurement and Information Transfer, St. Petersburg, Russian Federation. vol. 4680, Feb. 2002. DOI: 10.1117/12.454678.
   Google Scholar
• J. W. Dawson, et al. “Analysis of the scalability of diffraction-limited fiber lasers and amplifiers to high average power,” Opt. Express, vol. 16, pp. 13240–13266, 2008. DOI: 10.1364/OE.16.013240.
   PubMed Web of Science ®Google Scholar
• J. D. Minelly, et al. “High gain fibre power amplifier tandem-pumped by a 3 W multistripe diode,” Proc. Opt. Fiber Commun. Conf., vol. 5, pp. 32–33, 1992.
   Google Scholar
• G. Machinet, et al., “High single-pass small signal gain in femtosecond solid state Yb: caF2 amplifiers pumped by a 976-nm YDFA”, CLEO- Laser Science to Photonic Applications, Baltimore, MD, 2011, pp. 1–2.
   Google Scholar
• K. Schuhmann, et al. “Multipass amplifiers with self-compensation of the thermal lens,” Appl. Opt., vol. 57, pp. 10323–10333, 2018. DOI: 10.1364/AO.57.010323.
   PubMed Web of Science ®Google Scholar
• J. P. Delavaux and J. A. Nagel, “Multi-stage erbium-doped fiber amplifier designs,” J. Lightwave Technol., vol. 13, no. 5, pp.703–720, 1995. DOI: 10.1109/50.387788.
   Web of Science ®Google Scholar
• S. Hwang et al., “Broad-band erbium-doped fiber amplifier with double-pass configuration,” IEEE Photonics Technol. Lett., vol. 13, no. 12, pp.1289–1291, 2001. DOI: 10.1109/68.969884.
   Web of Science ®Google Scholar
• S. W. Harun and H. Ahmad, “Gain-clamping in two-stage L-band EDFA using an unwanted backward ase from second stagei,” Opt. Laser Technol., vol. 35, no. 6, pp.441–444, 2003. DOI: 10.1016/S0030-3992(03)00049-5.
   Web of Science ®Google Scholar
• C. Michie, A. E. Kelly, I. Armstrong, I. Andonovic, and C. Tombling, “An Adjustable Gain-Clamped Semiconductor Optical Amplifier (AGC-SOA),” J. Lightwave Technol., vol. 25, no. 6, pp.1466–1473, 2007. DOI: 10.1109/JLT.2007.895533.
   Web of Science ®Google Scholar
• J. P. Turkiewicz and P. Czyżak, “The high gain 1310nm Raman amplifier,” Proc. SPIE/Optical Fibers and Their Applications, Lipowy Most, Poland. vol. 9228, May. 2014. DOI:10.1117/12.2067055.
   Google Scholar
• T. L. Singan, Optical Fiber Communications: Principles and Applications. Delhi, India: Cambridge University Press, 2017.
   Google Scholar
• M. N. Isalm, Raman Amplifiers for Telecommunications 2: Sub-Systems and Systems. New York, USA: springer, 2007.
   Google Scholar
• J. Pedro and N. Costa, “Optimized hybrid Raman/EDFA amplifier placement for DWDM mesh networks,” J. LightWave Technol., vol. 36, no. 9, pp.1552–1561, 2018. DOI: 10.1109/JLT.2017.2783678.
   Web of Science ®Google Scholar
• A. A. A. Bakar, M. A. Mahdi, M. H. Al-Mansoori, S. Shaari, and A. K. Zamzuri, “Single-stage gain-clamped L-band EDFA with C-band ASE saturating tone,” Laser Phys., vol. 19, no. 5, pp.1026–1029, 2009. DOI: 10.1134/S1054660X09050259.
   Web of Science ®Google Scholar
• R. Paschotta, J. Nilsson, A. C. Tropper, and D. C. Hanna, “Ytterbium-doped fiber amplifiers,” IEEE J. Quantum Electron., vol. 33, no. 7, pp.1049–1056, 1997. DOI: 10.1109/3.594865.
   Web of Science ®Google Scholar
• C. Jauregui, H. Otto, S. Breitkopf, J. Limpert, and A. Tünnermann, “Optimizing high-power Yb-doped fiber amplifier systems in the presence of transverse mode instabilities,” Opt. Exp., vol. 24, pp. 7879–7892, 2016. DOI: 10.1364/OE.24.007879.
   PubMed Web of Science ®Google Scholar
• M. N. Zervas, “High power ytterbium-doped fiber lasers-fundamentals and applications,” Int. J. Mod. Phys. B, vol. 28, no. 12, pp.1442009, 2014. DOI: 10.1142/S0217979214420090.
   Web of Science ®Google Scholar
• H. M. Pask, et al. “Ytterbium-doped silica fiber lasers: Versatile sources for the 1–1.2 μm region,” IEEE J. Sel. Top. Quantum Electron., vol. 1, no. 1, pp. 2–13, 1995. DOI: 10.1109/2944.468377.
   Web of Science ®Google Scholar
• E. Yahel, O. Hess, and A. A. Hardy, “Ultrashort-pulse high-power Yb^3+ doped fiber amplifiers,” IEEE J. Quantum Electron, vol. 43, no. 9, pp.824–832, 2007. DOI: 10.1109/JQE.2007.902390.
   Web of Science ®Google Scholar
• Z. Michalis, “High power ytterbium-doped fiber lasers - Fundamentals and applications,” Int. J. Mod. Phys. B, vol. 28, no. 12, pp. 1442009, 2014. DOI: 10.1142/S0217979214420090.
   Web of Science ®Google Scholar
• M. J. K. Digonnet, Rare-Earth-Doped Fiber Lasers and Amplifiers. New York, USA: Marcel Dekker, 1993.
   Google Scholar
• P. Zhang, R. Su, L. Huang, D. Du, and L. Yang, “ Theoretical and experimental analysis of double-pass ytterbium-doped fiber amplifier”, Proc. SPIE/High-Power Lasers and Applications VIII, Beijing, China. vol. 10016, Nov. 2016. DOI: 10.1117/12.2246373.
   Google Scholar