Thermoelastic problem of two arbitrarily-shaped inclusions

References

• C. K. Chao, F. M. Chen, and T. H. Lin, “Thermal stresses induced by a remote uniform heat flow interacting with two circular inclusions,” J. Therm. Stresses, vol. 40, no. 5, pp. 564–582, 2017. DOI: 10.1080/01495739.2016.1228437.
   Web of Science ®Google Scholar
• Z. Abdulaliyev, et al., “Thermal stress concentration in plates from different materials,” J. Aircraft, vol. 49, no. 3, pp. 941–946, 2012. DOI: 10.2514/1.C031661.
   Web of Science ®Google Scholar
• M. Jafari and M. Jafari, “Effect of hole geometry on the thermal stress analysis of perforated composite plate under uniform heat flux,” J. Compos. Mater., vol. 53, no. 8, pp. 1079–1095, 2019. DOI: 10.1177/0021998318795279.
   Web of Science ®Google Scholar
• A. L. Florence and J. N. Goodier, “Thermal stresses due to disturbance of uniform heat flow by an insulated ovaloid hole,” J. Appl. Mech., vol. 27, no. 4, pp. 635–639, 1960. DOI: 10.1115/1.3644074.
   Google Scholar
• A. Sekiguchi, et al., “Void formation by thermal stress concentration at twin interfaces in Cu thin films,” Appl. Phys. Lett., vol. 79, no. 9, pp. 1264–1266, 2001. DOI: 10.1063/1.1399021.
   Web of Science ®Google Scholar
• C. H. Gao, et al., “Stress analysis of thermal fatigue fracture of brake disks based on thermomechanical coupling,” J. Tribol., vol. 129, no. 3, pp. 536–543, 2007. DOI: 10.1115/1.2736437.
   Web of Science ®Google Scholar
• C. Y. Zheng, X. B. Li, and C. W. Mi, “Reducing stress concentrations in unidirectionally tensioned thick-walled spheres through embedding a functionally graded reinforcement,” Int. J. Mech. Sci., vol. 152, pp. 257–267, 2019. DOI: 10.1016/j.ijmecsci.2018.12.055.
   Web of Science ®Google Scholar
• Q. Q. Yang and C. F. Gao, “Non-axisymmetric thermal stress around a circular hole in a functionally graded infinite plate,” J. Therm. Stresses, vol. 33, no. 4, pp. 318–334, 2010. DOI: 10.1080/01495731003656923.
   Web of Science ®Google Scholar
• X. Wang, “Uniform fields inside two non-elliptical inclusions,” Math. Mech. Solids, vol. 17, no. 7, pp. 736–761, 2012. DOI: 10.1177/1081286511429888.
   Web of Science ®Google Scholar
• M. Dai, C. F. Gao, and C. Q. Ru, “Uniform stress fields inside multiple inclusions in an elastic infinite plane under plane deformation,” Proc. Math. Phys. Eng. Sci, vol. 471, no. 2177, pp. 20140933, 2015. DOI: 10.1098/rspa.2014.0933.
   PubMed Web of Science ®Google Scholar
• M. Dai and C. F. Gao, “Non-circular nano-inclusions with interface effects that achieve uniform internal strain fields in an elastic plane under anti-plane shear,” Arch. Appl. Mech., vol. 86, no. 7, pp. 1295–1309, 2016. DOI: 10.1007/s00419-015-1098-0.
   Web of Science ®Google Scholar
• N. I. Muskhelishvili, Some Basic Problems of the Mathematical Theory of Elasticity, Groningen: Noordhoff, 1957.
   Google Scholar
• G. N. Savin, Stress Concentration around Holes, New York: Pergamon Press, 1961.
   Google Scholar
• J. C. Luo and C. F. Gao, “Faber series method for plane problems of an arbitrarily shaped inclusion,” Acta Mech., vol. 208, no. 3-4, pp. 133–145, 2009. DOI: 10.1007/s00707-008-0138-z.
   Web of Science ®Google Scholar
• J. Y. Tang and H. B. Yang, “An alternative numerical scheme for calculating the thermal stresses around an inclusion of arbitrary shape in an elastic plane under uniform remote in-plane heat flux,” Acta Mech., vol. 230, no. 7, pp. 2399–2412, 2019. DOI: 10.1007/s00707-019-02388-w.
   Web of Science ®Google Scholar
• C. F. Gao and W. X. Fan, “Exact solutions for the plane problem in piezoelectric materials with an elliptic or a crack,” Int. J. Solids Struct., vol. 36, no. 17, pp. 2527–2540, 1999. DOI: 10.1016/S0020-7683(98)00120-6.
   Web of Science ®Google Scholar
• K. Song and P. Schiavone, “Thermal conduction around a circular nanoinhomogeneity,” Int. J. Heat Mass Tran., vol. 150, pp. 119297, 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.119297.
   Web of Science ®Google Scholar
• K. Song and P. Schiavone, “Thermally neutral nano-hole and its effect on the elastic field,” Eur. J. Mech. A-Solid, vol. 81, pp. 103973, 2020. DOI: 10.1016/j.euromechsol.2020.103973.
   Web of Science ®Google Scholar
• S. Wang, et al., “Stress field around an arbitrarily shaped nanosized hole with surface tension,” Acta Mech., vol. 225, no. 12, pp. 3453–3462, 2014. DOI: 10.1007/s00707-014-1148-7.
   Web of Science ®Google Scholar
• S. Wang, et al., “Surface tension-induced interfacial stresses around a nanoscale inclusion of arbitrary shape,” Z. Angew. Math. Phys., vol. 68, no. 6, pp. 127, 2017. DOI: 10.1007/s00033-017-0876-7.
   Web of Science ®Google Scholar
• M. Dai, “Design of periodic harmonic holes with surface tension in plane deformations,” Math. Mech. Solids, vol. 24, no. 7, pp. 2060–2065, 2019. DOI: 10.1177/1081286518811880.
   Web of Science ®Google Scholar
• X. Wang and P. Schiavone, “Interaction of a screw dislocation with a nano-sized, arbitrarily shaped inhomogeneity with interface stresses under anti-plane deformations,” Proc. Math. Phys. Eng. Sci, vol. 470, no. 2170, pp. 20140313, 2014. DOI: 10.1098/rspa.2014.0313.
   PubMed Web of Science ®Google Scholar
• S. Wang, Z. T. Chen, and C. F. Gao, “Analytic solution for a circular nano-inhomogeneity in a finite matrix,” Nano Mater. Sci., vol. 1, no. 2, pp. 116–120, 2019. DOI: 10.1016/j.nanoms.2019.02.002.
   Google Scholar
• M. Dai and P. Schiavone, “Edge dislocation interacting with a Steigmann-Ogden interface incorporating residual tension,” Int. J. Eng. Sci., vol. 139, pp. 62–69, 2019. DOI: 10.1016/j.ijengsci.2019.01.009.
   Web of Science ®Google Scholar
• M. A. Grekov and T. S. Sergeeva, “Interaction of edge dislocation array with bimaterial interface incorporating interface elasticity,” Int. J. Eng. Sci., vol. 149, pp. 62–69, 2020. DOI: 10.1016/j.ijengsci.2020.103233.
   Web of Science ®Google Scholar
• J. Wu, C. Q. Ru, and L. Zhang, “An elliptical liquid inclusion in an infinite elastic plane,” Proc. R. Soc. A., vol. 474, no. 2215, pp. 20170813, 2018. DOI: 10.1098/rspa.2017.0813.
   Google Scholar
• M. Dai, M. Li, and P. Schiavone, “Plane deformations of an inhomogeneity-matrix system incorporating a compressible liquid inhomogeneity and complete Gurtin-Murdoch interface model,” J. Appl. Mech., vol. 85, no. 12, pp. 121010, 2018., DOI: 10.1115/1.4041469.
   Web of Science ®Google Scholar
• M. Dai, J. Hua, and P. Schiavone, “Compressible liquid/gas inclusion with high initial pressure in plane deformation: Modified boundary conditions and related analytical solutions,” Eur. J. Mech. A-Solid, vol. 82, no. 10400, 2020. DOI: 10.1016/j.euromechsol.2020.104000.
   Google Scholar
• Y. Ma, A. Lu, and H. Cai, “An analytical method for determining the non-enclosed elastoplastic interface of a circular hole,” Math. Mech. Solids, vol. 25, no. 5, pp. 1199–1213, 2020. DOI: 10.1177/1081286520909489.
   Web of Science ®Google Scholar