Thermo-mechanical modeling and transient analysis of frictional braking of elevator safety gear

References

• BSI EN 81-20 2014. “Safety rules for the construction and installation of lifts—Lifts for the transport of persons and goods—Part 20: Passenger and goods passenger lifts.”
   Google Scholar
• S. C. Lim, M. F. Ashby and J. F. Brunton, “The effect of sliding conditions on the dry friction of metals,” Acta Metall, vol. 37, no. 3, pp. 767–772, 1989. DOI: 10.1016/0001-6160(89)90003-5.
   Google Scholar
• BSI EN 13463-5 2003. “Non-electrical Equipment for Use in Potentially Explosive Atmospheres—Part 5: Protection by Constructional Safety ‘c.’”
   Google Scholar
• D. L. Goldsby and T. E. Tullis, “Flash heating leads to low frictional strength of crustal rocks at earthquake slip rates,” Science, vol. 334, no. 6053, pp. 216–218, 2011. DOI: 10.1126/science.1207902.
   PubMed Web of Science ®Google Scholar
• M. Hideka et al., “Development of ultra-high-speed elevator that achieved the world’s fastest elevator with a speed of 1,200 m/min,” Hitachi Rev., vol. 66, no. 3, pp. 219–230, 2017.
   Google Scholar
• A. Yevtushenko and M. Kuciej, “Temperature and thermal stresses in a pad/disc during braking,” Appl. Therm. Eng., vol. 30, no. 4, pp. 354–359, 2010. DOI: 10.1016/j.applthermaleng.2009.09.015.
   Web of Science ®Google Scholar
• A. Belhocine and M. Bouchetara, “Thermal analysis of a solid brake disc,” Appl. Therm. Eng., vol. 32, pp. 59–67, 2012. DOI: 10.1016/j.applthermaleng.2011.08.029.
   Web of Science ®Google Scholar
• A. Belhocine and M. Bouchetara, “Thermomechanical modelling of dry contacts in automotive disc brake,” Int. J. Therm. Sci., vol. 60, pp. 161–170, 2012. DOI: 10.1016/j.ijthermalsci.2012.05.006.
   Web of Science ®Google Scholar
• M.-R. Ishak, A.-R. A. Bakar, A. Belhocine, J.-M. Taib and W.-Z. W. Omar, “Brake torque analysis of fully mechanical parking brake system,” Theor. Expe. Approach Measur., vol. 94, pp. 487–497, 2016. DOI: 10.1016/j.measurement.2016.08.026.
   Web of Science ®Google Scholar
• A. Belhocine, “FE prediction of thermal performance and stresses in an automotive disc brake system,” Int. J. Adv. Manuf. Technol., vol. 89, no. 9–12, pp. 3563–3578, 2017. DOI: 10.1007/s00170-016-9357-y.
   Web of Science ®Google Scholar
• N. G. AliBelhocine, “Effects of Young’s modulus on disc brake squeal using finite element analysis,” Int. J. Acoust. Vib., vol. 21, no. 3, pp. 292–300, 2016.
   Google Scholar
• A. Belhocine and W. Z. W. Omar, “Three-dimensional finite element modeling and analysis of the mechanical behavior of dry contact slipping between the disc and the brake pads,” Int. J. Adv. Manuf. Technol., vol. 88, no. 1–4, pp. 1035–1051, 2017. DOI: 10.1007/s00170-016-8822-y.
   Web of Science ®Google Scholar
• A. Belhocine and W. Z. W. Omar, “CFD analysis of the brake disc and the wheel house through air flow: predictions of Surface heat transfer coefficients (STHC) during braking operation,” J. Mech. Sci. Technol., vol. 32, no. 1, pp. 481–490, 2018. DOI: 10.1007/s12206-017-1249-z.
   Web of Science ®Google Scholar
• A. Belhocine and O. I. Abdullah, “A thermomechanical model for the analysis of disc brake using the finite element method in frictional contact,” J. Therm. Stress., vol. 43, no. 3, pp. 305–320, 2020. DOI: 10.1080/01495739.2019.1683482.
   Web of Science ®Google Scholar
• B. Ghadimi, F. Kowsary and M. Khorami, “Thermal analysis of locomotive wheel-mounted brake disc,” Appl. Therm. Eng., vol. 51, no. 1–2, pp. 948–952, 2013. DOI: 10.1016/j.applthermaleng.2012.10.051.
   Web of Science ®Google Scholar
• J.-G. Bauzin and N. Laraqi, “Three-dimensional analytical calculation of the temperature in a brake disc of a high-speed train,” Appl. Therm. Eng., vol. 154, pp. 668–675, 2019. DOI: 10.1016/j.applthermaleng.2019.03.112.
   Web of Science ®Google Scholar
• C. Zhang et al., “Simulated three-dimensional transient temperature field during aircraft braking for C/SiC composite brake disc,” Mater. Des., vol. 32, no. 5, pp. 2590–2595, 2011. DOI: 10.1016/j.matdes.2011.01.041.
   Web of Science ®Google Scholar
• H. Xu et al., “Influence of matrix carbon texture on the temperature field of carbon/carbon composites during braking,” Tribol. Int., vol. 44, no. 1, pp. 18–24, 2011. DOI: 10.1016/j.triboint.2010.09.004.
   Web of Science ®Google Scholar
• G. Dimitrios, C. Iraklis and S. Nickolas, “Dynamic and structural integrity analysis of a complete elevator system through a mixed computational-experimental finite element methodology,” Eng. Struct., vol. 160, pp. 473–487, 2018.
   Web of Science ®Google Scholar
• P. Lonkwic, P. Różyło and H. Dębski, “Numerical and experimental analysis of the progressive gear body with the use of finite-element method,” EiN, vol. 17, no. 4, pp. 544–550, 2015. DOI: 10.17531/ein.2015.4.9.
   Web of Science ®Google Scholar
• L. Paweł and R. Patryk, “Theoretical and experimental analysis of loading impact from the progressive gear on the lift braking distance with the use of the free fall method,” Adv. Sci. Technol., vol. 10, no. 30, pp. 103–109, 2016.
   Google Scholar
• J. Yao et al., “Numerical simulation and experimental study of temperature increase in the safety-clamp action of explosion-proof elevator,” Mechatronics, vol. 2011, no. 12, pp. 13–17, 2010.
   Google Scholar
• ABAQUS, User’s Manual and Theory Manual. Providence, RI, USA: Hibbit, Karlsson & Sorenson, V2016, 2016.
   Google Scholar
• K. Seid, C. H. Lance and G. T. Brian, “Explicit coupled thermo-mechanical finite element model of steel solidification,” Int. J. Numer. Meth. Eng., vol. 78, pp. 1–31, 2009.
   Web of Science ®Google Scholar
• A. Wu, X. Shi and A. A. Polycarpou, “An elastic-plastic spherical contact model under combined normal and tangential loading,” ASME J. Appl. Mech., vol. 79, no. 5, 051001-1, 2012. DOI: 10.1115/1.4006457.
   Web of Science ®Google Scholar
• A. Wu and X. Shi, “Numerical investigation of adhesive wear and static friction based on the ductile fracture of junction,” ASME J. Appl. Mech., vol. 80, no. 4, 041032-1, 2013. DOI: 10.1115/1.4023109.
   Web of Science ®Google Scholar
• X. Shi, A. Wu, C. Jin and S. Qu, “Thermomechanical modeling and transient analysis of sliding contacts between an elastic-plastic asperity and a rigid isothermal flat,” Tribol. Int., vol. 81, pp. 53–60, 2015. DOI: 10.1016/j.triboint.2014.08.004.
   Web of Science ®Google Scholar
• Metal Handbook, “Properties and selection: nonferrous alloys and special-purpose materials,” in The Materials Information Society, vol. 2, 10th ed. Ohio, USA: ASM International, 1990.
   Google Scholar
• X. Tan, P. P. Conway and F. Sarvar, “Thermo-mechanical properties and regression models of alloys: AISI 305, CK 60, CuBe2 and Laiton MS 63,” J. Mater. Process. Technol., vol. 168, no. 1, pp. 152–163, 2005. DOI: 10.1016/j.jmatprotec.2004.11.011.
   Web of Science ®Google Scholar
• S. Hu, L. Du and M. Huang, “Testing thermal contact conductance under plastic deformation,” J. Central South Univer. (Sci. Technol.), vol. 37, no. 1, pp. 91–95, 2006.
   Google Scholar