References
- T. Dbouk. 2017. “A review about the engineering design of optimal heat transfer systems using topology optimization,” Appl. Therm. Eng., vol. 112, pp. 841–854. DOI: https://doi.org/10.1016/j.applthermaleng.2016.10.134.
- M. P. Bendsøe and N. Kikuchi. 1988. “Generating optimal topologies in structural design using a homogenization method,” Comput. Methods Appl. Mech. Eng., vol. 71, no. 2, pp. 197–224. DOI: https://doi.org/10.1016/0045-7825(88)90086-2.
- K. Nabaki, J. Shen, and X. Huang. 2019. “Evolutionary topology optimization of continuum structures considering fatigue failure,” Mater. Des., vol. 166, pp. 107586. DOI: https://doi.org/10.1016/j.matdes.2019.107586.
- O. Sigmund and K. Maute. 2013. “Topology optimization approaches: A comparative review,” Struct. Multidisc Optim., vol. 48, no. 6, pp. 1031–1055. DOI: https://doi.org/10.1007/s00158-013-0978-6.
- M. P. Bendsøe and O. Sigmund. 2003. Topology Optimization: Theory, Methods and Applications. Berlin, Heidelberg: Springer.
- G. Sved and Z. Ginos. 1968. “Structural optimization under multiple loading,” Int. J. Mech. Sci., vol. 10, no. 10, pp. 803–805. DOI: https://doi.org/10.1016/0020-7403(68)90021-0.
- G. D. Cheng and X. Guo. 1997. “Epsilon-relaxed approach in structural topology optimization,” Struct. Optim., vol. 13, no. 4, pp. 258–266. DOI: https://doi.org/10.1007/BF01197454.
- P. Duysinx and M. P. Bendsøe. 1998. “Topology optimization of continuum structures with local stress constraints,” Int. J. Numer. Meth. Engng., vol. 43, no. 8, pp. 1453–1478. DOI: https://doi.org/10.1002/(SICI)1097-0207(19981230)43:8 < 1453::AID-NME480 > 3.0.CO;2-2.
- M. Bruggi. 2008. “On an alternative approach to stress constraints relaxation in topology optimization,” Struct. Multidisc Optim., vol. 36, no. 2, pp. 125–141. DOI: https://doi.org/10.1007/s00158-007-0203-6.
- C. Le et al., 2010. “Stress-based topology optimization for continua,” Struct. Multidisc Optim., vol. 41, no. 4, pp. 605–620. DOI: https://doi.org/10.1007/s00158-009-0440-y.
- X. Guo, W. Zhang, and W. Zhong. 2014. “Stress-related topology optimization of continuum structures involving multi-phase materials,” Comput. Methods Appl. Mech. Eng., vol. 268, pp. 632–655. DOI: https://doi.org/10.1016/j.cma.2013.10.003.
- L. Xia, L. Zhang, Q. Xia, and T. Shi. 2018a. “Stress-based topology optimization using bi-directional evolutionary structural optimization method,” Comput. Methods Appl. Mech. Eng., vol. 333, pp. 356–370. DOI: https://doi.org/10.1016/j.cma.2018.01.035.
- E. Holmberg, B. Torstenfelt, and A. Klarbring. 2013. “Stress constrained topology optimization,” Struct. Multidisc Optim., vol. 48, no. 1, pp. 33–47. DOI: https://doi.org/10.1007/s00158-012-0880-7.
- Y. Luo, M. Y. Wang, and Z. Kang. 2013. “An enhanced aggregation method for topology optimization with local stress constraints,” Comput. Methods Appl. Mech. Eng., vol. 254, pp. 31–41. DOI: https://doi.org/10.1016/j.cma.2012.10.019.
- X. Gao, Y. Li, H. Ma, and G. Chen. 2020. “Improving the overall performance of continuum structures: a topology optimization model considering stiffness, strength and stability,” Comput. Methods Appl. Mech. Eng., vol. 359, pp. 112660. DOI: https://doi.org/10.1016/j.cma.2019.112660.
- H. Liu, D. Yang, P. Hao, and X. Zhu. 2018. “Isogeometric analysis based topology optimization design with global stress constraint,” Comput. Methods Appl. Mech. Eng., vol. 342, pp. 625–652. DOI: https://doi.org/10.1016/j.cma.2018.08.013.
- C. Conlan-Smith and K. A. James. 2019. “A stress-based topology optimization method for heterogeneous structures,” Struct. Multidisc Optim., vol. 60, no. 1, pp. 167–183. DOI: https://doi.org/10.1007/s00158-019-02207-9.
- S. Ha and S. Cho. 2005. “Topological shape optimization of heat conduction problems using level set approach,” Numer. Heat Transf. Part B Fundam., vol. 48, no. 1, pp. 67–88. DOI: https://doi.org/10.1080/10407790590935966.
- Q. Xia, T. Shi, and L. Xia. 2018b. “Topology optimization for heat conduction by combining level set method and BESO method,” Int. J. Heat Mass Transf., vol. 127, pp. 200–209. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.036.
- C. Zhuang, and Z. Xiong. 2015. “Temperature-constrained topology optimization of transient heat conduction problems,” Numer. Heat Transf. Part B Fundam., vol. 68, no. 4, pp. 366–385. DOI: https://doi.org/10.1080/10407790.2015.1033306.
- A. Gersborg-Hansen, M. P. Bendsøe, and O. Sigmund. 2006. “Topology optimization of heat conduction problems using the finite volume method,” Struct. Multidisc Optim., vol. 31, no. 4, pp. 251–259. DOI: https://doi.org/10.1007/s00158-005-0584-3.
- Q. Li, G. P. Steven, Y. M. Xie, and O. M. Querin. 2004. “Evolutionary topology optimization for temperature reduction of heat conducting fields,” Int. J. Heat Mass Transf., vol. 47, no. 23, pp. 5071–5083. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2004.06.010.
- C. G. Zhuang, Z. H. Xiong, and H. Ding. 2007. “A level set method for topology optimization of heat conduction problem under multiple load cases,” Comput. Methods Appl. Mech. Eng., vol. 196, no. 4-6, pp. 1074–1084. DOI: https://doi.org/10.1016/j.cma.2006.08.005.
- T. Gao et al., 2008. “Topology optimization of heat conduction problem involving design-dependent heat load effect,” Finite Elem. Anal. Des., vol. 44, no. 14, pp. 805–813. DOI: https://doi.org/10.1016/j.finel.2008.06.001.
- S. Yan, F. Wang, and O. Sigmund. 2018. “On the non-optimality of tree structures for heat conduction,” Int. J. Heat Mass Transf., vol. 122, pp. 660–680. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.01.114.
- L. Tang et al., 2019. “Topology optimization of nonlinear heat conduction problems involving large temperature gradient,” Comput. Methods Appl. Mech. Eng., vol. 357, pp. 112600. DOI: https://doi.org/10.1016/j.cma.2019.112600.
- T. Gao, P. Xu, and W. Zhang. 2016. “Topology optimization of thermo-elastic structures with multiple materials under mass constraint,” Comput. Struct., vol. 173, pp. 150–160. DOI: https://doi.org/10.1016/j.compstruc.2016.06.002.
- W. Zhang, J. Yang, Y. Xu, and T. Gao. 2014. “Topology optimization of thermoelastic structures : mean compliance minimization or elastic strain energy minimization,” Struct. Multidisc Optim., vol. 49, no. 3, pp. 417–429. DOI: https://doi.org/10.1007/s00158-013-0991-9.
- Q. Li, G. P. Steven, O. M. Querin, and Y. M. Xie. 2000. “Structural topology design with multiple thermal criteria,” Eng. Comput., vol. 17, no. 6, pp. 715–734. DOI: https://doi.org/10.1108/02644400010340642.
- Q. Li, G. P. Steven, and Y. M. Xie. 2001. “Thermoelastic topology optimization for problems with varying temperature fields,” J. Therm. Stress, vol. 24, pp. 347–366. DOI: https://doi.org/10.1080/01495730151078153.
- J. D. Deaton and R. V. Grandhi. 2016. “Stress-based design of thermal structures via topology optimization,” Struct. Multidisc Optim., vol. 53, no. 2, pp. 253–270. DOI: https://doi.org/10.1007/s00158-015-1331-z.
- S. Deng and K. Suresh. 2017a. “Topology optimization under thermo-elastic buckling,” Struct. Multidisc Optim., vol. 55, no. 5, pp. 1759–1772. DOI: https://doi.org/10.1007/s00158-016-1611-2.
- S. Deng and K. Suresh. 2017b. “Stress constrained thermo-elastic topology optimization with varying temperature fields via augmented topological sensitivity based level-set,” Struct. Multidisc Optim., vol. 56, no. 6, pp. 1413–1427. DOI: https://doi.org/10.1007/s00158-017-1732-2.
- C. Wu, J. Fang, and Q. Li. 2019. “Multi-material topology optimization for thermal buckling criteria,” Comput. Methods Appl. Mech. Eng., vol. 346, pp. 1136–1155. DOI: https://doi.org/10.1016/j.cma.2018.08.015.
- A. Takezawa et al., 2014. “Structural topology optimization with strength and heat conduction constraints,” Comput. Methods Appl. Mech. Eng., vol. 276, pp. 341–361. DOI: https://doi.org/10.1016/j.cma.2014.04.003.
- X. Zhu et al., 2019. “Temperature-constrained topology optimization of thermo-mechanical coupled problems,” Eng. Optim., vol. 51, no. 10, pp. 1687–1709. DOI: https://doi.org/10.1080/0305215X.2018.1554065.
- S. Kambampati, J. S. Gray, and H. A. Kim. 2020. “Level set topology optimization of structures under stress and temperature constraints,” Comput. Struct., vol. 235, pp. 106265. DOI: https://doi.org/10.1016/j.compstruc.2020.106265.
- K. Svanberg. 1987. “The method of moving asymptotes—a new method for structural optimization,” Int. J. Numer. Meth. Engng., vol. 24, no. 2, pp. 359–373. DOI: https://doi.org/10.1002/nme.1620240207.
- O. Sigmund. 2001. “Design of multiphysics actuators using topology optimization - Part I: One-material structures,” Comput. Methods Appl. Mech. Eng., vol. 190, no. 49-50, pp. 6577–6604. DOI: https://doi.org/10.1016/S0045-7825(01)00251-1.
- M. Bruyneel and P. Duysinx. 2005. “Note on topology optimization of continuum structures including self-weight,” Struct. Multidisc Optim., vol. 29, no. 4, pp. 245–256. DOI: https://doi.org/10.1007/s00158-004-0484-y.
- T. Gao and W. Zhang. 2010. “Topology optimization involving thermo-elastic stress loads,” Struct. Multidisc Optim., vol. 42, no. 5, pp. 725–738. DOI: https://doi.org/10.1007/s00158-010-0527-5.
- X. Wang, K. Long, V. N. Hoang, and P. Hu. 2018. “An explicit optimization model for integrated layout design of planar multi-component systems using moving morphable bars,” Comput. Methods Appl. Mech. Eng., vol. 342, pp. 46–70. DOI: https://doi.org/10.1016/j.cma.2018.07.032.
- P. Pedersen and N. L. Pedersen. 2012. “Interpolation/penalization applied for strength design of 3D thermoelastic structures,” Struct. Multidisc Optim., vol. 45, no. 6, pp. 773–786. DOI: https://doi.org/10.1007/s00158-011-0755-3.
- M. Bruggi and P. Duysinx. 2012. “Topology optimization for minimum weight with compliance and stress constraints,” Struct. Multidisc Optim., vol. 46, no. 3, pp. 369–384. DOI: https://doi.org/10.1007/s00158-012-0759-7.
- W. S. Zhang, X. Guo, M. Y. Wang, and P. Wei. 2013. “Optimal topology design of continuum structures with stress concentration alleviation via level set method,” Int. J. Numer. Meth. Engng., vol. 93, no. 9, pp. 942–959. DOI: https://doi.org/10.1002/nme.4416.
- Q. Meng, B. Xu, C. Wang, and L. Zhao. 2020. “Stress constrained thermo-elastic topology optimization based on stabilizing control schemes,” J. Therm. Stress, vol. 43, no. 8, pp. 1040–1068. DOI: https://doi.org/10.1080/01495739.2020.1766391.
- A. Iga, S. Nishiwaki, K. Izui, and M. Yoshimura. 2009. “Topology optimization for thermal conductors considering design-dependent effects, including heat conduction and convection,” Int. J. Heat Mass Transf., vol. 52, no. 11-12, pp. 2721–2732. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2008.12.013.
- D. Yang, H. Liu, W. Zhang, and S. Li. 2018. “Stress-constrained topology optimization based on maximum stress measures,” Comput. Struct., vol. 198, pp. 23–39. DOI: https://doi.org/10.1016/j.compstruc.2018.01.008.