157
Views
0
CrossRef citations to date
0
Altmetric
Articles

Thermomechanical instability of viscoelastic friction materials in automotive disk clutches and brake pads

ORCID Icon, , ORCID Icon & ORCID Icon
Pages 728-742 | Received 19 Sep 2022, Accepted 27 Feb 2023, Published online: 31 Mar 2023

References

  • G. Sathyamoorthy, R. Vijay, and D. Lenin Singaravelu, “Brake friction composite materials: A review on classifications and influences of friction materials in braking performance with characterizations,” Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., vol. 236, no. 8, pp. 1674–1706, 2022. DOI: 10.1177/13506501211064082.
  • R. Vijay, D. Lenin Singaravelu, and R. Jayaganthan, “Development and characterization of stainless steel fiber-based copper-free brake liner formulation: A positive solution for steel fiber replacement,” Friction, vol. 8, no. 2, pp. 396–420, 2020. DOI: 10.1007/s40544-019-0280-8.
  • E. Denys and A. Arbor, “Control of brake noise by tuned mass dampers,” US2006/0266599A1, 2006.
  • A. Bajer, V. Belsky, and S.-W. Kung, The Influence of Friction-Induced Damping and Nonlinear Effects on Brake Squeal Analysis. Warrendale, PA, USA: SAE International, 2004, p. 9. DOI: 10.4271/2004-01-2794.
  • E. V. Torskaya and F. I. Stepanov, “Effect of surface layers in sliding contact of viscoelastic solids (3-D model of material),” Front. Mech. Eng, vol. 5, p. 26, 2019. DOI: 10.3389/fmech.2019.00026.
  • Z. P. Bažant, “2.02—Stability of elastic, anelastic, and disintegrating structures, and finite strain effects: An overview,” in I. Milne, R.O. Ritchie, and B. Karihaloo, Eds. Comprehensive Structural Integrity, Oxford: Pergamon, 2000, pp. 47–80. DOI: 10.1016/B0-08-043749-4/02094-2.
  • L. Tessitore, “Damping Backplate Vibration in a Drum Brake,” GB2346421A, 2000.
  • V. P. Sergienko, S. N. Bukharov, and A. V. Kupreev, “Noise and vibration in brake systems of vehicles. Part 1: Experimental procedures,” J. Frict. Wear, vol. 29, no. 3, pp. 234–241, 2008. DOI: 10.3103/S1068366608030136.
  • K. Koranteng, J.-S. Shaahu and Y.-B. Yi, “Effect of contact geometry on temperature field distribution and thermal buckling of an in-wheel disc brake system,” Aust. J. Mech. Eng., pp. 1–13, 2021. DOI: 10.1080/14484846.2021.1958992.
  • A. M. Al-Shabibi and J. R. Barber, “Transient solution of a thermoelastic instability problem using a reduced order model,” Int. J. Mech. Sci., vol. 44, no. 3, pp. 451–464, 2002. DOI: 10.1016/S0020-7403(01)00110-2.
  • F. F. Mahmoud, A. G. El-Shafei, A. E. Al-Shorbagy, and A. A. Abdel Rahman, “Effect of the material parameters on layered viscoelastic frictional contact systems,” Adv. Tribol., vol. 2010, pp. 1–14, 2010. DOI: 10.1155/2010/258307.
  • P. Decuzzi, “Frictionally excited thermoelastic instability in viscoelastic and poroelastic media,” Int. J. Mech. Sci., vol. 44, no. 3, pp. 585–600, 2002. DOI: 10.1016/S0020-7403(01)00101-1.
  • H. Yu, Z. Li and Q. Jane Wang, “Viscoelastic-adhesive contact modeling: Application to the characterization of the viscoelastic behavior of materials,” Mech. Mater., vol. 60, pp. 55–65, 2013. DOI: 10.1016/j.mechmat.2013.01.004.
  • J. Úradníček, M. Musil, L. Gašparovič, and M. Bachratý, “Influence of material-dependent damping on brake squeal in a specific disc brake system,” Appl. Sci., vol. 11, no. 6, pp. 2625, 2021. DOI: 10.3390/app11062625.
  • Y. Zhao, H. Liu, N. Wang, B. Fan, and M. Li, “Friction analysis of anisotropic surface for viscoelastic material,” ILT, vol. 73, no. 8, pp. 1113–1121, 2021. DOI: 10.1108/ILT-06-2021-0223.
  • B. N. J. Persson, “On the elastic energy and stress correlation in the contact between elastic solids with randomly rough surfaces,” J Phys. Condens Matter, vol. 20, pp. 312001, 2008. DOI: 10.1088/0953-8984/20/31/312001.
  • B. N. J. Persson, “Theory of rubber friction and contact mechanics,” J Chem Phys, vol. 115, pp. 22, 2001.
  • C. Feng, D. Zhang, K. Chen, and Y. Guo, “Study on viscoelastic friction and wear between friction linings and wire rope,” Int. J. Mech. Sci., vol. 142–143, pp. 140–52, 2018. DOI: 10.1016/j.ijmecsci.2018.04.046.
  • C.-Y. Lin, “Alternative form of standard linear solid model for characterizing stress relaxation and creep: Including a novel parameter for quantifying the ratio of fluids to solids of a viscoelastic solid,” Front. Mater, vol. 7, p. 11, 2020. DOI: 10.3389/fmats.2020.00011.
  • N. Mills, M. Jenkins, and S. Kukureka, “Viscoelastic behaviour,” in N. Mills, M. Jenkins, and S. Kukureka, Eds. Plastics, 4th ed., Oxford. UK: Butterworth-Heinemann, 2020, pp. 111–25. DOI: 10.1016/B978-0-08-102499-7.00007-2.
  • R. A. Burton, V. Nerlikar, and S. R. Kilaparti, “Thermoplastic instability in a seal-like configuration,” Wear, vol. 24, pp. 177–188, 1973,
  • W. N. Findley, J. S. Lai, and K. Onaran, Creep and Relaxation of Nonlinear Viscoelastic Materials, With an Introduction to Linear Viscoelasticity. Amsterdam/New York/Oxford: North-Holland Publishing Company; New York: Sole Distributors for the U.S.A. and Canada: Elsevier/North Holland INC, 1976,
  • K. Koranteng, J.-S. Shaahu, and Y.-B. Yi, “A transient simulation of thermomechanical instability in metal-free friction materials with anisotropic properties,” Int. J. Solids Struct., vol. 252, pp. 111816, 2022. DOI: 10.1016/j.ijsolstr.2022.111816.
  • M. Smith, ABAQUS/Standard User’s Manual, Version 6.9. Providence, RI, USA: Dassault Systèmes Simulia Corp, 2009.
  • J. C. Heinrich, P. S. Huyakorn, O. C. Zienkiewicz, and A. R. Mitchell, “An ‘upwind’ finite element scheme for two-dimensional convective transport equation,” Int. J. Numer. Meth. Engng, vol. 11, no. 1, pp. 131–143, 1977. DOI: 10.1002/nme.1620110113.
  • C.-C. Yu and J. C. Heinrich, “Petrov—Galerkin method for multidimensional, time-dependent, convective-diffusion equations,” Int. J. Numer. Meth. Eng., vol. 24, no. 11, pp. 2201–2215, 1987. DOI: 10.1002/nme.1620241112.
  • P. Zagrodzki, K. B. Lam, E. Al Bahkali, and J. R. Barber, “Nonlinear transient behavior of a sliding system with frictionally excited thermoelastic instability,” J. Tribol., vol. 123, no. 4, pp. 699–708, 2001. DOI: 10.1115/1.1353180.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.