The Phase Inversion Properties of a Non-ionic Surfactant and its Performance for Treatment of Oily Wastewater Produced from Polymer Flooding

REFERENCES

• Wever, D. A. Z.; Picchioni F.; Broekhuis, A. A. (2011) Polymers of enhanced oil recovery: A paradigm for structure-property relationship in aqueous solution. Prog. Polym. Sci., 36: 1558–1628.
   Web of Science ®Google Scholar
• Zhang, L. J.; Yue, X. A. (2008) Displacement of polymer solution on residual oil trapped in dead ends. J. Cent. South. Univ. Tech., 5: 84–87.
   Web of Science ®Google Scholar
• Zhang, L. J.; Yue X. A.; Guo, F. (2008) Micro-mechanisms of residual oil mobilization by viscoelastic fluids. Pet. Sci., 5: 56–61.
   Web of Science ®Google Scholar
• Zhang, Y. Q.; Gao, B. Y.; Lu, L. (2010) Treatment of produced water from polymer flooding in oil production by the combined method of hydrolysis acidification dynamic membrane bioreactor-coagulation process. J. Petro. Sci. Tech., 74:14–19.
   Web of Science ®Google Scholar
• Gao, B.Y.; Jia, Y. Y.; Zhang, Y. Q. (2011) Performance of dithiocarbamate-type flocculant in treating simulated polymer flooding produced water. J. Environ. Sci., 23: 37–43.
   Web of Science ®Google Scholar
• Deng, S. B.; Bai, R. B.; Chen, J. P. (2002) Produced water from polymer flooding process in crude oil extraction: characterization and treatment by a novel crossflow oil-water separatior. Sep. Purif. Technol., 29: 207–216.
   Web of Science ®Google Scholar
• Zhao, X. F.; Liu, L. X.; Wang, Y. C. (2008) Influences of partially hydrolyzed polyacrylamide (HPAM) residue on the flocculation behavior of oily wastewater produced from polymer flooding. Sep. Purif. Technol., 62: 199–204.
   Web of Science ®Google Scholar
• Zhang, J.; Sun, X. J.; Wang, C. L. (2003) Treatment of oily wastewater produced from refinery processes using flocculation and ceramic membrane filtration. Sep. Purif. Technol., 32:93–98.
   Web of Science ®Google Scholar
• Qian, J. W.; Xiang, X. J.; Yang, W. Y.; Wang, M.; Zheng, B. Q. (2004) Flocculation performance of different polyacrylamide and the relation between optimal dose and critical concentration. Eur. Polym. J., 40: 1699–1704.
   Web of Science ®Google Scholar
• Daniel, S.; Lars, W. (2003) Adsorption and flocculation behavior of cationic polyacrylamide and colloidal silica. Colloid Surf. A. 219:161–172.
   Web of Science ®Google Scholar
• Bourrel, M.; Schechter, R. S. (1998) Microemulsions and related systems. Marcel Dekker: New York.
   Google Scholar
• Salager, J. L.; Anton, R. E.; Forgiarini, A.; Marquez, L. (2009) In Microemulsions- Background, New Concepts, Applications, Perspectives; C. Stubenrauch, Ed.; Blackwell Publishing: Oxford, UK, pp 84–121.
   Google Scholar
• Zambrano, N.; Tyrode, E.; Mira, I.; Marquez, L.; Rodriguez, M. P.; Salager, J. L. (2003) Emusion catastrophic inversion from abnormal to normal morphology.1. effect of the water-to-oil ratio rate of change on the dynamic inversion frontier. Ind. Eng. Chem. Res., 42:50–56.
   Web of Science ®Google Scholar
• Mira, I.; Zambrano, N.; Tyrode, E.; Marquez, L.; Pena, A.; Pizzino, A.; Salager, J. L. (2003) Emulsion catastrophic inversion from abnormal to normal morphology. 2. Effect of the stirring intensity on the dynamic inversion frontier. Ind. Eng. Chem. Res., 42: 57–61.
   Web of Science ®Google Scholar
• Alvarez, J. G.; Sadtler, V.; Choplin, L.; Salager, J. L. (2011) Viscous oil emulsification by catastrophic phase inversion: Influence of oil viscosity and process conditions. Ind. Eng. Chem. Res., 505:575–5583.
   Google Scholar
• Salager, J. L.; Forgiarini, A. M. (2012) Emulsion stabilizaion, breaking, and inversion depends upon formulation: Advantage or inconvenience in flow assurance. Energ. Fuel, 26: 4027–4033.
   Web of Science ®Google Scholar
• Fernando, L. C.; Veronique, S.; Jerome, B. (2007) Emulsion Science, 2nd ed.; Springer: New York, pp 19–23.
   Google Scholar
• Tong, S. N.; Chen, D. S.; Chung, L. Z. (1983) Unsaturated polyesters based on bis(2-hydroxyethyl)terephthalate. Polymer, 24:469–472.
   Web of Science ®Google Scholar
• Atta, A. M.; Fadda, A. A.; Rahman, A. A. H. A.; Ismail, H. S.; Fouad, R. R. (2012) Application of new modified poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylend oxide) copolymers as demulsifier for petroleum crude oil emulsion. J. Disper. Sci. Technol., 33: 775–785.
   Web of Science ®Google Scholar
• Abdel-Azim, A. A. A.; Zaki, N. N.; Maysour, N. E. S. (1997) Polyoxyalkylenated amines for breaking water-in-oil emulsions: Effect of structural variations on the demulsification efficiency. Polym. Adv. Technol., 91:159–166.
   Google Scholar
• Rao, J. J.; McClements, D. J. (2010) Stabilization of phase inversion temperature nanoemulsions by surfactant displacement. J. Agric. Food. Chem., 58: 7059– 7066.
   PubMed Web of Science ®Google Scholar
• Kunieda, H.; Fukui, Y.; Uchiyama, H.; Solans, C. (1996) Spontaneous formation of highly concentrated water-in-oil emulsions (gelemulsions). Langmuir, 12: 2136–2140.
   Web of Science ®Google Scholar