Influence of fabrication parameters on bond strength of adhesively bonded flip-chip interconnects

References

• Lau J, Wong CP, Lee N, Lee SW. Electronics Manufacturing with Lead-Free. Halogen-Free Conductive Adhesives. New York (NY): McGraw-Hill; 2002.
   Google Scholar
• Caers JFJ, Zhao XJ, Sy HG, Wong EH, Mhaisalkar SG. Towards a predictive behavior of nonconductive adhesive interconnects in moisture environment. 54th Electronic Components and Technology Conference; 2004; Las Vegas, NV.
   Google Scholar
• Haase J, Iyer P, Baumgartner P, Farley D, Dasgupta A, Caers J. Mechanics of adhesively bonded flip-chip-on-flex assemblies. Part I: durability of anisotropically conductive adhesive interconnect. J. Adhes. Sci. Technol. 2008; 22:1733–1756.
   Web of Science ®Google Scholar
• Farley D, Kahnert T, Sinha K, Solares S, Dasgupta A, Caers JFJ, Zhao XJ. Cold welding: a new factor governing the robustness of adhesively bonded flip-chip interconnects. 59th Electronic Components and Technology Conference; 2009; San Diego, CA.
   Google Scholar
• Obeid I, Morizio JC, Moxon KA, Nicolelis MAL, Wolf PD. Two multichannel integrated circuits for neural recording and signal processing. IEEE Transactions on Biomedical Engineering. 2003;50:255–258.
   PubMedGoogle Scholar
• Aschenbrenner R, Gwiasda J, Eldring J, Zakel E, Reichl H. Gold ball bumps for adhesive flip chip assembly. Berlin: Adhesives in Electronics; 1994.
   Google Scholar
• Holm R. Electric contacts handbook. Berlin: Springer-Verlag; 1958. p. 433.
   Google Scholar
• Frisk L, Ristolainen E. Flip chip attachment on flexible LCP substrate using an ACF. Microelectron. Reliab. 2005;45:583–588.
   Google Scholar
• Teh LK, Wong CC, Mhaisalkar S, Ong K, Teo PS, Wong EH. Characterization of nonconductive adhesives for flip-chip interconnection. J. Electron. Mater. 2004;33:271–276.
   Web of Science ®Google Scholar
• Teo M, Mhaisalkar SG, Wong EH, Teo PS, Wong CC, Ong K, Goh CF, Teh LK. Correlation of material properties to reliability performance of anisotropic conductive adhesive flip chip packages. IEEE Trans. Compon. Packag. Technol. 2005;28:157–164.
   Google Scholar
• Yim MJ, Hwang JS, Kwon W, Jang KW, Paik KW. Highly reliable nonconductive adhesives for flip chip CSP applications. IEEE Trans. Electron. Packag. Manuf. 2003;26:150–155.
   Google Scholar
• Yin C, Lu H, Bailey C, Chan Y-C. Effects of solder reflow on the reliability of flip-chip on flex interconnections using anisotropic conductive adhesives. IEEE Trans. Electron. Packag. Manuf. 2004;27:254–259.
   Google Scholar
• Aschenbrenner R, Miessner R, Reichl H. Adhesive flip chip bonding on flexible substrates. The First IEEE International Symposium on polymeric electronics packaging; Norrkoping, Sweden; 1997.
   Google Scholar
• Chan YC, Hung KC, Tang CW, Wu CML. Degradation mechanisms of anisotropic conductive adhesive joints for flip chip on flex applications. Adhesive Joining and coating technology in electronics manufacturing; Espoo, Finland; 2000.
   Google Scholar
• Chiang KN, Chang CW, Lin JD. Analysis of ACA/ACF package using equivalent spring method. Electronics packaging technology conference; Sheraton Towers, Singapore; 2000.
   Google Scholar
• Li L, Fang T. Anisotropic conductive adhesive films for flip chip on flex packages. Proceedings on 4th International Conference on adhesive joining and coating technology in electronics manufacturing; Espoo, Finland;2000.
   Google Scholar
• Ferrando F, Zaberli JF, Clot P, Chenuz JM. Industrial approach of a flip-chip method using the stud-bumps with a non-conductive paste. 4th International Conference on adhesive joining and coating technology in electronics manufacturing, proceedings; Espoo, Finland; 2000.
   Google Scholar
• Pajonk J. New flip chip technology utilizing non-conductive adhesive adapted for high volume chip card module production. Electronics manufacturing technology symposium; 2004; San Jose.
   Google Scholar
• Mercado LL, White J, Sarihan V, Lee T. Failure mechanism study of anisotropic conductive film (ACF) packages. IEEE Trans. Compon. Packag. Technol. 2003;26:509–516.
   Google Scholar
• Johnson KL, Kendall K, Roberts AD. Surface energy and the contact of elastic solids. Proc. R. Soc. London 1971;324:301–313.
   Web of Science ®Google Scholar
• Johnson KL, Kendall K, Roberts AD. Surface energy and the contact of elastic solids. Proc. R. Soc. London 1971;324:301–313.
   Web of Science ®Google Scholar
• Cuthrell RE, Tipping DW. Electric contacts. II. Mechanics of closure for gold contacts. J. Appl. Phys. 1973;44:4360–4369.
   Google Scholar
• Cuthrell RE, Tipping DW. Electric contacts. II. Mechanics of closure for gold contacts. J. Appl. Phys. 1973;44:4360–4365.
   Google Scholar
• Simon SL, McKenna GB, Sindt O. Modeling the evolution of the dynamic mechanical properties of a commercial epoxy during cure after gelation. J. Appl. Polym. Sci. 2000;76:495–508.
   Web of Science ®Google Scholar
• Taylor PA, Nelson JS, Dodson BW. Adhesion between atomically flat metallic surfaces. Phys. Rev. B. 1991;44:5834–5841.
   Google Scholar
• Garmong G, Aton NEP, Argon AS. Attainment of full interfacial during diffusion bonding. Metall. Mater. Trans. A. 1975;6(6):1269–1279.
   Google Scholar
• Hamilton CH. Superplastic forming and diffusion bonding of titanium alloys. Titanium Sci. Technol. 1973; 621–647.
   Google Scholar
• White AAL, Allen DJ. Sintering processes in diffusion bonding. Joining Met. 1981;2:96–103.
   Google Scholar
• Derby B, Wallach ER. Theoretical model for diffusion bonding. Mater. Sci. Technol. 1982;16:49–56.
   Google Scholar
• Derby B, Wallach ER. Diffusion bonding: development of theoretical model. Mater. Sci. Technol. 1984;18:427–443.
   Google Scholar
• King WH, Owczarski WA. Diffusion welding of commercially pure titanium. Weld. J. 1967;46:289–298.
   Web of Science ®Google Scholar
• Ghosh AK, Hamilton CH. Superplastic forming and diffusion bonding of titanium alloys. Defense Sci. J. 1986;36:153–177.
   Google Scholar
• Garmong G, Aton NEP, Argon AS. Attainment of full interfacial during diffusion bonding. Metall. Trans. A. 1975;6(6):1269–1279.
   Google Scholar
• Sinha K. Mechanics of non planar interfaces in flip-chip interconnects [dissertation]. University of Maryland; 2012.
   Google Scholar
• He J, Guo Y, Lin Z. Numerical and experimental analysis of thermosonic bond strength considering interfacial contact phenomena. J. Phys. D: Appl. Phys. 2008; 41:165304(13 pp).
   Google Scholar
• Fu X, Chung DDL. Sensitivity of the bond strength to the structure of the interface between reinforcement and cement, and the variability of this structure. J. Cem. Concr. Res. 1998;28(6):787–793.
   Google Scholar
• Chemicool Periodic Table [Internet]. Gold: [cited 2012]. Available from: http://www.chemicool.com/elements/gold.html
   Google Scholar
• NPL [Internet]. UK: [cited 2012]. Available from: http://www.kayelaby.npl.co.uk/general_physics/2_2/2_2_2.html
   Google Scholar
• Needs RJ, Mansfield M. Calculations of the surface stress tensor and surface energy of the (111) surfaces of iridium, platinum and gold. J. Phys.: Condens. Matter. 1989;1:7555–7563.
   Web of Science ®Google Scholar
• Arcidiacono S, Bieri NR, Poulikakos D, Grigoropoulos CP. On the coalescence of gold nanoparticles. Int. J. Multiphase Flow. 2004;30:979–994.
   Web of Science ®Google Scholar
• Lin TS, Chung YW. Measurement of the activation energy for surface diffusion in gold by scanning tunneling microscopy. Surf. Sci. 1989;207:539–546.
   Google Scholar
• Brown C, Rezvanian O, Zikry MA, Krim J. Temperature dependence of asperity contact and contact resistance in gold RF MEMS switches. J. Micromech. Microeng. 2009; 19: 025006 (9pp).
   Google Scholar