Adhesion promotion of thick fire-retardant melamine polymer dip-coatings at polyolefin surfaces by using plasma polymers

References

• Camino G, Costa L. Performance and mechanisms of fire retardants in polymers – a review. Polym. Degrad. Stab. 1988;20:271–294.10.1016/0141-3910(88)90073-0
   Web of Science ®Google Scholar
• Rossmann K. Improvement of bonding properties of polyethylene. J. Polym. Sci. 1956;19:141–144.10.1002/pol.1956.120199114
   Web of Science ®Google Scholar
• Sun J, Yao L, Gao Z, Peng S, Wang C, Qiu Y. Surface modification of PET films by atmospheric pressure plasma-induced acrylic acid inverse emulsion graft polymerization. Surf. Coat. Technol. 2010;204:4101–4106.10.1016/j.surfcoat.2010.05.038
   Web of Science ®Google Scholar
• Chen LM, Hong Z, Kwan WL, Lu C-H, Lai YF, Lei B, Liu CP, Yang Y. Multi-source/component spray coating for polymer solar cells. ACS Nano. 2010;4:4744–4752.10.1021/nn901758p
   PubMed Web of Science ®Google Scholar
• Agag T, Tsuchiya H, Takeichi T. Novel organic–inorganic hybrids prepared from polybenzoxazine and titania using sol–gel process. Polymer. 2004;45:7903–7910.10.1016/j.polymer.2004.09.022
   Web of Science ®Google Scholar
• Zhang XH, Wan HM, Min Y, Qi GR. Novel nitrogen-containing epoxy resin. I. Synthetic kinetics. J. Appl. Polym. Sci. 2005;96:723–731.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Hong Zhang X, Qin Min Y, Zhao H, Mei Wan H, Rong Qi G. Novel nitrogen-containing epoxy resin. II. Cure kinetics by differential scanning calorimetry. J. Appl. Polym. Sci. 2006;100:3483–3489.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Wu CS, Liu YL. Preparation and properties of epoxy/amine hybrid resins from in situ polymerization. J. Polym. Sci., Part A: Polym. Chem. 2004;42:1868–1875.10.1002/(ISSN)1099-0518
   Web of Science ®Google Scholar
• Min Y, Zhang X, Zhao H, Qi G. Synthesis of 2, 4, 6-tri (hydroxylphenylmethylamino)-s-triazine and its curing behavior and mechanism with DGEBA. Acta Polym. Sinica. 2006;1:855–859.
   Google Scholar
• Huang Z, Zhang X, Qi G. Novel halogen-free flame retardant thermoset from a hybrid hexakis (methoxymethyl) melamine/phosphorus-containing epoxy resin cured with phenol formaldehyde novolac. Express Polym. Lett. 2009;3:788–796.10.3144/expresspolymlett.2009.97
   Web of Science ®Google Scholar
• Konig A, Fehrenbacher U, Kroke E, Hirth T. Thermal decomposition behavior of the flame retardant melamine in slabstock flexible polyurethane foams. J. Fire Sci. 2009;27:187–211.10.1177/0734904108099329
   Web of Science ®Google Scholar
• Chen WY, Wang YZ, Chang FC. Thermal and flame retardation properties of melamine phosphate-modified epoxy resins. J. Polym. Res. 2004;11:109–117.10.1023/B:JPOL.0000031069.23622.bc
   Web of Science ®Google Scholar
• Liu M, Liu Y, Wang Q. Flame-retarded poly (propylene) with melamine phosphate and pentaerythritol/polyurethane composite charring agent. Macromol. Mater. Eng. 2007;292:206–213.10.1002/(ISSN)1439-2054
   Web of Science ®Google Scholar
• Dyckerhoff VG, Sell PJ. Über den Einfluss der Grenzflächenspannung auf die Haftfestigkeit [Influence of interface tension on adhesion]. Angew. Makromol. Chem.. 1972;21:169–185.10.1002/apmc.1972.050210114
   Google Scholar
• Friedrich J, Gähde J, Frommelt H, Wittrich H. Modifizierung von Feststoffoberflächen in einer HF-Entladung. II. Schichtuntersuchungen, Reaktionsmechanismus und Verbundergebnisse. Faserforsch [Modification of solid surfaces by exposure to radio-frequency discharge, II Structure of layers, reaction mechanism and composite strength]. Textiltechn./Z. Polymerenforsch. 1976;27:599–603.
   Google Scholar
• Friedrich J, Kühn G, Mix R, Hoffmann K, Resch-Genger U. Tailoring of polymer surfaces with monotype functional groups of variable density using chemical and plasma chemical processes. Prog. Colloid Polym. Sci. Springer. 2006;132:62–71.10.1007/b104970
   Google Scholar
• Farag ZR, Krüger S, Hidde G, Schimanski A, Jäger C, Friedrich J. Deposition of thick polymer or inorganic layers with flame-retardant properties by combination of plasma and spray processes. Surf. Coat. Technol. 2013;228:266–274.10.1016/j.surfcoat.2013.04.039
   Web of Science ®Google Scholar
• Alexander M, Beamson G, Blomfield C, Leggett G, Duc T. Interaction of carboxylic acids with the oxyhydroxide surface of aluminium: poly (acrylic acid), acetic acid and propionic acid on pseudoboehmite. J. Electron. Spectrosc. Relat. Phenom. 2001;121:19–32. Chem. 149:203–216.10.1016/S0368-2048(01)00324-3
   Web of Science ®Google Scholar
• Yin H, Mix R, Friedrich J. Influence of differently structured aluminium-polypropylene interfaces on adhesion. J. Adhes. Sci. Technol. 2011;25:799–818.
   Web of Science ®Google Scholar
• Mohamed AF. Plasma-initiated polymerization and copolymerization and analysis of products [dissertation]. Berlin: Technische Universtität Berlin; 2011.
   Google Scholar
• Wettmarshausen S, Min H, Unger W, Jäger C, Hidde G, Friedrich J. Significance of hydrogen-deuterium exchange at polyolefin surfaces on exposure to ammonia low-pressure plasma. Plasma Chem. Plasma Process. 2011;31:551–572.10.1007/s11090-011-9304-5
   Web of Science ®Google Scholar
• Friedrich J, Unger W, Lippitz A, Koprinarov I, Ghode A, Geng S, Kühn G. Plasma-based introduction of monosort functional groups of different type and density onto polymer surfaces. Part 1: behaviour of polymers exposed to oxygen plasma. Compos. Interfaces. 2003;10:139–171.10.1163/156855403765826865
   Web of Science ®Google Scholar
• Hoffmann K, Mix R, Resch-Genger U, Friedrich JF. Monitoring of amino functionalities on plasma-chemically modified polypropylene supports with a chromogenic and fluorogenic pyrylium reporter. Langmuir. 2007;23:8411–8416.10.1021/la7004908
   PubMed Web of Science ®Google Scholar
• Mix R, Falkenhagen J, Schulze R, Gerstung V, Friedrich J. Plasma homo-and copolymerization of allyl alcohol and styrene. In: Mittal L, editor. Polymer surface modification: relevance to adhesion. 2009;5:317–340.
   Google Scholar
• Chilkoti A, Ratner BD. In: Sabbattini L, Zambonin PG, editor. Surface characterization of advanced polymers. Weinheim: Wiley-VCH, 1993. p. 221–302.
   Google Scholar
• Abbas A, Vivien C, Bocquet B, Guillochon D, Supiot P. Preparation and multi-characterization of plasma polymerized allylamine films. Plasma Process. Polym. 2009;6:593–604.10.1002/ppap.v6:9
   Web of Science ®Google Scholar
• Fahmy A, Mix R, Schönhals A, Friedrich JF. Structure of plasma-deposited poly (acrylic acid) films. Plasma Process. Polym. 2011;8:147–159.
   Web of Science ®Google Scholar
• Graf N, Yegen E, Gross T, Lippitz A, Weigel W, Krakert S, Terfort A, Unger WE. XPS and NEXAFS studies of aliphatic and aromatic amine species on functionalized surfaces. Surf. Sci. 2009;603:2849–2860.10.1016/j.susc.2009.07.029
   Web of Science ®Google Scholar
• Fahmy A, Mix R, Schönhals A, Friedrich J. Structure-property relationship of thin plasma deposited poly (allyl alcohol) films. Plasma Chem. Plasma Process. 2011;31:477–498.10.1007/s11090-011-9297-0
   Web of Science ®Google Scholar
• Derylo-Marczewska A, Goworek J, Pikus S, Kobylas E, Zgrajka W. Characterization of melamine-formaldehyde resins by XPS, SAXS, and sorption techniques. Langmuir. 2002;18:7538–7543.10.1021/la0202172
   Web of Science ®Google Scholar
• Coullerez G, Léonard D, Lundmark S, Mathieu HJ. XPS and ToF-SIMS study of freeze-dried and thermally cured melamine–formaldehyde resins of different molar ratios. Surf. Interface Anal. 2000;29:431–443.10.1002/(ISSN)1096-9918
   Web of Science ®Google Scholar
• Merline DJ, Vukusic S, Abdala AA. Melamine formaldehyde: curing studies and reaction mechanism. Polym. J. 2013;45:413–419.10.1038/pj.2012.162
   Web of Science ®Google Scholar
• DIN 4102-1. Brandverhalten von Baustoffen und Bauteilen - Teil 1: Baustoffe; Begriffe [Fire behavior of building materials and components - Part 1: Building materials; terms], Anforderungen und Prüfungen, Ausgabe [Requirements and tests, output]. 1998–05.
   Google Scholar