Characterization and modelling of the viscous behaviour of adhesives using the modified Arcan device

References

• Irisarri F-X, Laurin F, Carrere N, Maire J-F. Progressive damage and failure of mechanically fastened joints in CFRP laminates – Part I: refined finite element modelling of single-fastener joints. Compos. Struct. 2012;94:2269–2277.10.1016/j.compstruct.2011.07.023
   Web of Science ®Google Scholar
• Da Silva LFM, Öchsner A, editors. Modeling of adhesively bonded joints. Springer; 2008. ISBN: 978-3-540-79055-6 (Print) 978-3-540-79056-3 (Online).
   Google Scholar
• Yu XX, Crocombe AD, Richardson G. Material modelling for rate-dependent adhesives. Int. J. Adhes. Adhes. 2001;21:197–210.10.1016/S0143-7496(00)00051-8
   Web of Science ®Google Scholar
• Iwamoto T, Nagai T, Sawa T. Experimental and computational investigations on strain rate sensitivity and deformation behavior of bulk materials made of epoxy resin structural adhesive. Int. J. Solids Struct. 2010;47:175–185.10.1016/j.ijsolstr.2009.09.026
   Web of Science ®Google Scholar
• Chalkley PD, Chiu WK. An improved method for testing the shear stress/strain behaviour of adhesives. Int. J. Adhes. Adhes. 1993;13:236–242.
   Web of Science ®Google Scholar
• Cognard J-Y, Créac’hcadec R. Analysis of the non-linear behavior of an adhesive in bonded assemblies under shear loadings. Proposal of an improved TAST. J. Adhes. Sci. Technol. 2009;23:1333–1355.10.1163/156856109X432956
   Web of Science ®Google Scholar
• Da Silva LFM, Öchsner A, Adams RD, editors. Handbook of adhesion technology. Vol. 1. Springer; 2011, XXIV, 1543 p. ISBN 978-3-642-01168-9.
   Google Scholar
• Geiss PL, Vogt D. Assessment and prediction of long-term mechanical properties of adhesives with high plasticity. J. Adhes. Sci. Technol. 2005;19:1291–1303.10.1163/156856105774784385
   Web of Science ®Google Scholar
• Choi K-K, Reda Taha MM. Rheological modeling and finite element simulation of epoxy adhesive creep in FRP-strengthened RC beams. J. Adhes. Sci. Technol. 2013;27:523–535.10.1080/01694243.2012.687557
   Web of Science ®Google Scholar
• da Silva LFM, Adams RD, Gibbs M. Manufacture of adhesive joints and bulk specimens with high-temperature adhesives. Int. J. Adhes. Adhes. 2004;24:69–83.10.1016/S0143-7496(03)00101-5
   Web of Science ®Google Scholar
• Cognard J-Y. Numerical analysis of edge effects in adhesively-bonded assemblies application to the determination of the adhesive behaviour. Comput. Struct. 2008;86:1704–1717.10.1016/j.compstruc.2008.02.003
   Web of Science ®Google Scholar
• Cognard JY, Créac’hcadec R, Sohier L, Davies P. Analysis of the nonlinear behavior of adhesives in bonded assemblies—Comparison of TAST and Arcan tests. Int. J. Adhes. Adhes. 2008;28:393–404.10.1016/j.ijadhadh.2008.04.006
   Web of Science ®Google Scholar
• Cognard JY, Davies P, Gineste B, Sohier L. Development of an improved adhesive test method for composite assembly design. Compos. Sci. Technol. 2005;65:359–368.10.1016/j.compscitech.2004.09.008
   Web of Science ®Google Scholar
• Maurice J, Cognard J-Y, Creac’hcadec R, Davies P, Sohier L, Mahdi S. Characterization and modelling of the 3D elastic–plastic behaviour of an adhesively bonded joint under monotonic tension/compression-shear loads: influence of three cure cycles. J. Adhes. Sci. Technol. 2013;27:165–181.10.1080/01694243.2012.701528
   Web of Science ®Google Scholar
• Mahnken R, Schlimmer M. Simulation of strength difference in elasto-plasticity for adhesive materials. Int. J. Numer. Methods Eng. 2005;63:1461–1477.10.1002/(ISSN)1097-0207
   Web of Science ®Google Scholar
• Jousset P, Rachik M. Implementation, identification and validation of an elasto-plastic-damage model for the finite element simulation of structural bonded joints. Int. J. Adhes. Adhes. 2014;50:107–118.10.1016/j.ijadhadh.2014.01.020
   Web of Science ®Google Scholar
• Zgoul M, Crocombe AD. Numerical modelling of lap joints bonded with a rate-dependent adhesive. Int. J. Adhes. Adhes. 2004;24:355–366.10.1016/j.ijadhadh.2003.11.006
   Web of Science ®Google Scholar
• Pandey PC, Shankaragouda H, Singh A. Kr. Nonlinear analysis of adhesively bonded lap joints considering viscoplasticity in adhesives. Comput. Struct. 1999;70:387–413.10.1016/S0045-7949(98)00168-0
   Web of Science ®Google Scholar
• Dean G. Modelling non-linear creep behaviour of an epoxy adhesive. Int. J. Adhes. Adhes. 2007;27:636–646.10.1016/j.ijadhadh.2006.11.004
   Web of Science ®Google Scholar
• Majda P, Skrodzewicz J. A modified creep model of epoxy adhesive at ambient temperature. Int. J. Adhes. Adhes. 2009;29:396–404.10.1016/j.ijadhadh.2008.07.010
   Web of Science ®Google Scholar
• Crocombe AD. Modelling and predicting the effects of test speed on the strength of joints made with FM73 adhesive. Int. J. Adhes. Adhes. 1995;15:21–27.10.1016/0143-7496(95)93639-3
   Web of Science ®Google Scholar
• Chiu WK, Jones R. Unified constitutive model for thermoset adhesive FM73. Int. J. Adhes. Adhes. 1995;15:131–136.10.1016/0143-7496(95)91623-E
   Web of Science ®Google Scholar
• Frank GJ, Brockman RA. A viscoelastic–viscoplastic constitutive model for glassy polymers. Int. J. Solids Struct. 2001;38:5149–5164.10.1016/S0020-7683(00)00339-5
   Web of Science ®Google Scholar
• Boubakar ML, Vang L, Trivaudey F, Perreux D. A meso–macro finite element modelling of laminate structures Part II: time-dependent behaviour. Compos. Struct. 2003;60:275–305.
   Web of Science ®Google Scholar
• Groth HL. Viscoelastic and viscoplastic stress analysis of adhesive joints. Int. J. Adhes. Adhes. 1990;10:207–213.10.1016/0143-7496(90)90105-7
   Web of Science ®Google Scholar
• Cognard JY, Sohier L, Davies P. A modified Arcan test to analyze the behavior of composites and their assemblies under out-of-plane loadings. Composites Part A. 2011;42:111–121.10.1016/j.compositesa.2010.10.012
   Web of Science ®Google Scholar
• Cognard J-Y, Bourgeois M, Créac’hcadec R, Sohier L. Comparative study of the results of various experimental tests used for the analysis of the mechanical behaviour of an adhesive in a bonded joint. J. Adhes. Sci. Technol. 2011; 5:2857–2879.
   Web of Science ®Google Scholar
• Gom Aramis, Handbook, 2014.
   Google Scholar
• Maire J-F. Etude théorique et expérimentale du comportement de matériaux composites en contraintes planes [Theoritical and experimental study of the behaviour of composite material under plane stresses assumptions]. PhD thesis, Besançon: Université de Franche-comté; 1992.
   Google Scholar
• Laurin F, Carrère N, Maire J-F. A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models. Composites Part A. 2007;38:198–209.10.1016/j.compositesa.2006.01.018
   Web of Science ®Google Scholar
• Carrere N, Laurin F, Maire J-F. Micromechanical-based hybrid mesoscopic 3D approach for non-linear progressive failure analysis of composite structures. J. Compos. Mater. 2012;46:2389–2415.10.1177/0021998312450179
   Web of Science ®Google Scholar
• Cognard J-Y, Badulescu C, Maurice J, Créac’hcadec R, Carrère N, Vedrine P. On modelling the behaviour of a ductile adhesive under low temperatures. Int. J. Adhes. Adhes. 2014;48:119–129.10.1016/j.ijadhadh.2013.09.014
   Web of Science ®Google Scholar
• Abaqus, User Manual, 2014
   Google Scholar
• Laurin F. Approche multiéchelle des mécanismes de ruine progressive des matériaux stratifiés et analyse de la tenue de structures composites [Multiscale analysis of the progressive failure mechanisms of laminated composites and analyse of the strength of composite structures] PhD thesis, Besançon: Université de Franche-comté; 2005.
   Google Scholar
• Lagarias JC, Reeds JA, Wright MH, Wright PE. Convergence properties of the Nelder–Mead simplex method in low dimensions. SIAM J. Optim. 1998;9:112–147.10.1137/S1052623496303470
   Web of Science ®Google Scholar