Physical and mechanical properties of concrete repair materials in dry and hot-dry environment

References

• Mailvaganam NP. Repair and protection of concrete structures. Boca Raton (FL): CRC Press; 1992.
   Google Scholar
• Perkins PH. Repair, protection and waterproofing of concrete structures. 3rd ed. London: E & FN Spon; 1997.10.4324/9780203475720
   Google Scholar
• Emmons PH. Concrete repair and maintenance illustrated. New Delhi: Galgotia; 1994.
   Google Scholar
• Kenai S, Laribi A, Berroubi A Building failures and concrete construction problems in Algeria. In: Swamy RN, editor. Proceeding of the international conference on infrastructure regeneration and rehabilitation. Sheffield, UK: University of Sheffield; 1999.
   Google Scholar
• Kenai S, Bahar R. Evaluation and repair of Algiers new airport building. Cem. Concr. Comp. 2003;25:633–641.10.1016/S0958-9465(02)00077-X
   Web of Science ®Google Scholar
• Emmons PH, Vaysbuurd AM, McDonald JE. Concrete repair in the future turn of the century-any problems. Concr. Inter. 1994;16:24–49.
   Google Scholar
• Emberson NK, Mays GC. Significance of property mismatch in the patch repair of structural concrete, Part 1: Properties of repair systems. Mag. Conc. Res. 1990;42:147–160.10.1680/macr.1990.42.152.147
   Web of Science ®Google Scholar
• Plum DR. The behaviour of polymer materials in concrete repair, and factors influencing selection. Struct. Eng. 1990;68:337–345.
   Google Scholar
• Mangat PS, Limbachiya MK. Repair materials properties, which influence long-term performance of concrete structures? Const. Build. Mater. 1995;9:81–90.10.1016/0950-0618(94)00003-K
   Web of Science ®Google Scholar
• Saucier F, Claireaux F, Cusson D, Pigeon M. The challenge of numerical modeling of strains and stresses in concrete repairs. Cem. Concr. Res. 1997;27:1261–1270.10.1016/S0008-8846(97)00106-3
   Web of Science ®Google Scholar
• Barroso De Aguiar J, Daniela Cruz M. A study of the adhesion between hydraulic mortars and concrete. J. Adhes. Sci. Technol. 1998;12:1243–1251.10.1163/156856198X00416
   Web of Science ®Google Scholar
• Tayeh BA, Abu Bakar BH, Megat Johari MA, Zeyad AM. Microstructural analysis of the adhesion mechanism between old concrete substrate and UHPFC. J. Adhes. Sci. Technol. 2014;28:1846–1864.
   Web of Science ®Google Scholar
• Tayeh BA, Abu Bakar BH, Megat Johari MA, Ratnam MM. The relationship between substrate roughness parameters and bond strength of ultra-high performance fiber concrete. J. Adhes. Sci. Technol. 2013;27:1790–1810.
   Web of Science ®Google Scholar
• Postan RW, Kesner K, McDonald JE, Vaysburd M, Emmons PH. Concrete repair material performance – Laboratory study. ACI Mater. J. 2001;98:137–147.
   Web of Science ®Google Scholar
• Mirza J, Mirza MS, Lapointe R. Laboratory and field performance of polymer modified cement-based repair mortars in cold climates. Const. Build. Mater. 2002;16:365–374.10.1016/S0950-0618(02)00027-2
   Web of Science ®Google Scholar
• El-Hawary M, Al-Khaiat H, Fereig S. Performance of epoxy-repaired concrete in a marine environment. Cem. Concr. Res. 2000;30:259–266.10.1016/S0008-8846(99)00242-2
   Web of Science ®Google Scholar
• Geymayr GW. Repair of concrete in tropical marine environment. In: Proceedings of the performance of concrete in marine environment conference. CANMET. St. Andrews. NB, Canada; 1980.
   Google Scholar
• Jadkowski TK, Wiltsie EA. Biodeterioration of concrete piling in the Arabian Gulf. In: Proceedings of the 4th Middle East Oil Show, Manama, Bahrain, published by Soc. of Petroleum Engineers of AIME, Richardson, TX, USA; 1985.
   Google Scholar
• Bamforth PB. BRITE-EURAM Project 3291: the development of standardized performance tests and criteria for concrete repair systems. BRITE-EURAM Workshop on Construction, UK; 1994.
   Google Scholar
• EN 196-1. Standard methods of testing cement. Part 1: Determination of strength. 2006.
   Google Scholar
• NF P 18-432. Concrete: shrinkage tests. Paris: AFNOR; 1981.
   Google Scholar
• NF P 18-502. Water absorption by capillary. Paris: AFNOR; 1989.
   Google Scholar
• NF P 18-502. Synthetic resin based or hydraulic binders based products or systems for superficial; Application on hardened concrete: Traction adhesive strength test on surface sawn support slab. Paris: AFNOR; 1993. 1989 NF P 18-840.
   Google Scholar
• Mangat PS, O'Flaherty FJ. Influence of elastic modulus on stress redistribution and cracking in repair patches. Cem. Concr. Res. 2000;30:125–136.10.1016/S0008-8846(99)00217-3
   Web of Science ®Google Scholar
• Tayeh BA, Abu Bakar BH, Megat Johari MA, Zeyad AM. The role of silica fume in the adhesion of concrete restoration systems. Adv. Mater. Res. 2012;626:265–269.
   Google Scholar
• Belaidi ASE. Characterization, mechanical properties and durability of repair mortar in hot weather conditions [MSc thesis]. Algeria: University of Blida; 2002.
   Google Scholar
• Ramezanipoor AA, Parhizar T. Performance of repair Mortars in hot weather conditions. In: Proceeding of the 7th International conference on inspection, appraisal, repair & maintenance of building and structures. Nottingham, UK; 2001. p. 541–547.
   Google Scholar
• Hassan KE, Robery PC, Al-Alawi L. Effect of hot-dry curing environment on the intrinsic properties of repair materials. Cem. Concr. Comp. 2000; 22: 453–458.
   Google Scholar
• Khatib JM, Mangat PS. Influence of superplasticizer and curing on porosity and pore structure of cement paste. Cem. Concr. Comp. 1999;21:431–437.10.1016/S0958-9465(99)00031-1
   Web of Science ®Google Scholar
• Pigeon M, Saucier F. Durability of repaired concrete structures. In: Malhotra VM, editor. Advances in concrete technology. Canada: CANMET; 1994. p. 721–752.
   Google Scholar
• Hassan KE, Brooks JJ, Al-Alawi L. Compatibility of repair mortars with concrete in hot-dry environment. Cem. Concr. Comp. 2001;23:93–101.
   Google Scholar
• Khatib JM, Mangat PS. Absorption characteristics of concrete as a function of location relative to casting position. Cem. Concr. Res. 1995;25:999–1010.10.1016/0008-8846(95)00095-T
   Web of Science ®Google Scholar
• NF P 18-840. Synthetic resin or hydraulic binder based products or products systems intended for hardened concrete surface repairs: guaranteed standardized characteristics. Paris; 1993.
   Google Scholar
• ACI Committee 503. Standard specification for repairing concrete with epoxy mortars (ACI 503, 4-79). Detroit (MI): American Concrete Institute (ACI); 1979.
   Google Scholar