References
- Grujicic M, Sellappan V, Omar M, Seyr N, Obieglo A, Erdmann M, Holzleitner J. An overview of the polymer-to-metal direct-adhesion hybrid technologies for load-bearing automotive components. J. Mater. Process. Technol. 2008;197:363–373.10.1016/j.jmatprotec.2007.06.058
- Grujicic M, Sellappan V, Kotrika S, Arakere G, Obieglo A, Erdmann M, Holzleitner J. Suitability analysis of a polymer–metal hybrid technology based on high-strength steels and direct polymer-to-metal adhesion for use in load-bearing automotive body-in-white applications. J. Mater. Process. Technol. 2009;209:1877–1890.10.1016/j.jmatprotec.2008.04.050
- Grujicic M, Pandurangan B, Bell W, Daqaq M, Ma L, Seyr N, Erdmann M, Holzleitner J. A computational analysis and suitability assessment of cold-gas dynamic spraying of glass-fiber-reinforced poly-amide 6 for use in direct-adhesion polymer metal hybrid components. Appl. Surf. Sci. 2008;254:2136–2145.10.1016/j.apsusc.2007.08.077
- Zhao W, Barsun S, Ramani K, Johnson T, King R, Lin S. Development of PMMA-precoating metal prostheses via injection molding: residual stresses. J. Biomed. Mater. Res. 2001;58:456–462.10.1002/(ISSN)1097-4636
- Honkanen M, Hoikkanen M, Vippola M, Vuorinen J, Lepistö T. Metal–plastic adhesion in injection-molded hybrids. J. Adhes. Sci. Technol. 2009;23:1747–1761.10.1163/016942409X12489445844435
- Fabrin P, Hoikkanen M, Vuorinen J. Adhesion of thermoplastic elastomer on surface treated aluminum by injection molding. Polym. Eng. Sci. 2007;47:1187–1191.
- Grujicic M, Sellappan V, Arakere G, Ochterbeck J, Seyr N, Obieglo A, Erdmann M, Holzleitner J. Investigation of a polymer metal inter-locking technology for use in load-bearing automotive components. Multi. Model. Mater. Struct. 2010;6:23–44.10.1108/15736101011055257
- Mori K, Sasaki H, Kobayashi I, Sai S, Hirahara H, Oishi Y. Adhesion of nylon-6 to triazine trithiol-treated metals during injection molding. J. Adhes. Sci. Technol. 2000;14:791–803.10.1163/156856100742889
- Boerio F, Shah P. Adhesion of injection molded PVC to steel substrates. J. Adhes. 2005;81:645–675.10.1080/00218460590954656
- Sasaki H, Kobayashi I, Sai S, Hirahara H, Oishi Y, Mori K. Adhesion of ABS resin to metals treated with triazine trithiol monosodium aqueous solution. J. Adhes. Sci. Technol. 1999;13:523–539.10.1163/156856199X00082
- Qiu J, Sakai E, Lei L, Takarada Y, Murakami S. Improving the shear strength by silane treatments of aluminum for direct joining of phenolic resin. J. Mater. Process. Technol. 2012;212:2406–2412.10.1016/j.jmatprotec.2012.07.008
- Ramani K, Moriarty B. Thermoplastic bonding to metals via injection molding for macro-composite manufacture. Polym. Eng. Sci. 1998;38:870–877.
- Lucchetta G, Marinello F, Bariani P. Aluminum sheet surface roughness correlation with adhesion in polymer metal hybrid overmolding. CIRP Ann. Manuf. Technol. 2011;60:559–562.10.1016/j.cirp.2011.03.073
- Byskov-Nielsen J, Boll JV, Holm AH, Højsholt R, Balling P. Ultra-high-strength micro-mechanical interlocking by injection molding into laser-structured surfaces. Int. J. Adhes. Adhes. 2010;30:485–488.10.1016/j.ijadhadh.2010.03.008
- Liu FC, Liao J, Gao Y, Nakata K. Effect of plasma electrolytic oxidation coating on joining metal to plastic. Sci. Technol. Weld. Joining. http://dx.doi.org/10.1179/1362171815Y.0000000012.
- Khan R, Yerokhin A, Li X, Dong H, Matthews A. Surface characterisation of DC plasma electrolytic oxidation treated 6082 aluminium alloy: effect of current density and electrolyte concentration. Surf. Coat. Technol. 2010;205:1679–1688.10.1016/j.surfcoat.2010.04.052
- Yerokhin A, Nie X, Leyland A, Matthews A, Dowey S. Plasma electrolysis for surface engineering. Surf. Coat. Technol. 1999;122:73–93.10.1016/S0257-8972(99)00441-7
- Curran J, Clyne T. Porosity in plasma electrolytic oxide coatings. Acta Mater. 2006;54:1985–1993.10.1016/j.actamat.2005.12.029
- Han I, Choi JH, Zhao BH, Baik HK, Lee I-S. Micro-arc oxidation in various concentration of KOH and structural change by different cut off potential. Curr. Appl. Phys. 2007;7:e23–e27.10.1016/j.cap.2006.11.008
- Bayati M, Moshfegh A, Golestani-Fard F. In situ growth of vanadia–titania nano/micro-porous layers with enhanced photocatalytic performance by micro-arc oxidation. Electrochim. Acta. 2010;55:3093–3102.10.1016/j.electacta.2010.01.045
- Bayati M, Zargar H, Molaei R, Golestani-Fard F, Kajbafvala E, Zanganeh S. One step growth of WO3-loaded Al2O3 micro/nano-porous films by micro arc oxidation. Colloids Surf. A. 2010;355:187–192.10.1016/j.colsurfa.2009.12.018
- Hussein R, Nie X, Northwood D. Influence of process parameters on electrolytic plasma discharging behaviour and aluminum oxide coating microstructure. Surf. Coat. Technol. 2010;205:1659–1667.10.1016/j.surfcoat.2010.08.059
- Durdu S, Deniz ÖF, Kutbay I, Usta M. Characterization and formation of hydroxyapatite on Ti6Al4V coated by plasma electrolytic oxidation. J. Alloys Compd. 2013;551:422–429.10.1016/j.jallcom.2012.11.024
- Yang Y, Liu Y. Effects of current density on the microstructure and the corrosion resistance of alumina coatings embedded with SiC nano-particles produced by micro-arc oxidation. J. Mater. Sci. Technol. 2010;26:1016–1020.
- Grujicic M. Injection over molding of polymer-metal hybrid structures. Am. J. Sci. Technol. 2014;1:167–181.
- Stojadinovic S, Vasilic R, Belca I, Petkovic M, Kasalica B, Nedic Z, Zekovic L. Characterization of the plasma electrolytic oxidation of aluminium in sodium tungstate. Corros. Sci. 2010;52:3258–3265.10.1016/j.corsci.2010.05.042
- Tseng C-C, Lee J-L, Kuo T-H, Kuo S-N, Tseng K-H. The influence of sodium tungstate concentration and anodizing conditions on microarc oxidation (MAO) coatings for aluminum alloy. Surf. Coat. Technol. 2012;206:3437–3443.10.1016/j.surfcoat.2012.02.002