References
- Guazzato M, Albakry M, Ringer SP, et al. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent. Mater. 2004;20:449–456.10.1016/j.dental.2003.05.002
- Della Bona A, Anusavice KJ. Microstructure, composition, and etching topography of dental ceramics. Int. J. Prosthodont. 2002;15:159–167.
- Amaral R, Özcan M, Bottino MA, et al. Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning. Dent. Mater. 2006;22:283–290.10.1016/j.dental.2005.04.021
- Yun JY, Ha SR, Lee JB, et al. Effect of sandblasting and various metal primers on the shear bond strength of resin cement to Y-TZP ceramic. Dent. Mater. 2010;26:650–658.10.1016/j.dental.2010.03.008
- Bhargava S, Doi H, Kondo R, et al Effect of sandblasting on the mechanical properties of Y-TZP zirconia. Biomed. Mater. Eng. 2012;22:383–398.
- Matinlinna JP, Lassila LV. Enhanced resin-composite bonding to zirconia framework after pretreatment with selected silane monomers. Dent. Mater. 2011;27:273–280.10.1016/j.dental.2010.11.002
- Casucci A, Osorio E, Osorio R, et al. Influence of different surface treatments on surface zirconia frameworks. J. Dent. 2009;37:891–897.10.1016/j.jdent.2009.06.013
- Oyagüe RC, Monticelli F, Toledano M, et al. Effect of water aging on microtensile bond strength of dual-cured resin cements to pre-treated sintered zirconium-oxide ceramics. Dent. Mater. 2009;25:392–399.10.1016/j.dental.2008.09.002
- Attia A, Lehmann F, Kern M. Influence of surface conditioning and cleaning methods on resin bonding to zirconia ceramic. Dent. Mater. 2011;27:207–213.10.1016/j.dental.2010.10.004
- Curtis AR, Wright AJ, Fleming GJ. The influence of surface modification techniques on the performance of a Y-TZP dental ceramic. J. Dent. 2006;34:195–206.10.1016/j.jdent.2005.06.006
- Casucci A, Mazzitelli C, Monticelli F, et al. Morphological analysis of three zirconium oxide ceramics: effect of surface treatments. Dent. Mater. 2010;26:751–760.10.1016/j.dental.2010.03.020
- Casucci A, Monticelli F, Goracci C, et al. Effect of surface pre-treatments on the zirconia ceramic–resin cement microtensile bond strength. Dent. Mater. 2011;27:1024–1030.10.1016/j.dental.2011.07.002
- Amaral R, Özcan M, Valandro LF, et al. Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions. J. Biomed. Mater. Res. Part B: Appl. Biomater. 2008;85B:1–9.10.1002/(ISSN)1552-4981
- Shimada Y, Yamaguchi S, Tagami J. Micro-shear bond strength of dual-cured resin cement to glass ceramics. Dent. Mater. 2002;18:380–388.10.1016/S0109-5641(01)00054-9
- Andersson M, Odén A. A new all-ceramic crown. A dense-sintered, high-purity alumina coping with porcelain. Acta Odontol. Scand. 1993;51:59–64.10.3109/00016359309041149
- Foxton RM, Cavalcanti AN, Nakajima M, et al. Durability of resin cement bond to aluminium oxide and zirconia ceramics after air abrasion and laser treatment. J. Prosthodont. 2011;20:84–92.10.1111/jopr.2011.20.issue-2
- Özcan M, Raadschelders J, Vallittu P, et al. Effect of particle deposition parameters on silica coating of zirconia using a chairside air-abrasion device. J. Adhes. Dent. 2013;15:211–214.
- Soares LD, Basso GR, Spazzin AO, et al. Mechanical reliability of air-abraded and acid-etched bonded feldspar ceramic. Dent. Mater. 2016;32:433–441.10.1016/j.dental.2015.12.011
- Valandro LF, Özcan M, Bottino MC, et al. Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: the effect of surface conditioning. J. Adhes. Dent. 2006;8:175–181.
- Yoshida K, Tsuo Y, Atsuta M. Bonding of dual-cured resin cement to zirconia ceramic using phosphate acid ester monomer and zirconate coupler. J. Biomed. Mater. Res. Part B: Appl. Biomater. 2006;77B:28–33.10.1002/(ISSN)1552-4981
- Özcan M, Cura C, Valandro LF. Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-META silanes. Odontology. 2011;99:62–67.
- El-Korashy DI, El-Refai DA. Mechanical properties and bonding potential of partially stabilized zirconia treated with different chemomechanical treatments. J. Adhes. Dent. 2014;16:365–376.
- Şanlı S, Çömlekoğlu MD, Çömlekoğlu E, et al. Influence of surface treatment on the resin-bonding of zirconia. Dent. Mater. 2015;31:657–668.10.1016/j.dental.2015.03.004
- Lawn BR, Deng Y, Lloyd IK, et al. Materials design of ceramic-based layer structures for crowns. J. Dent. Res. 2002;81:433–438.10.1177/154405910208100615
- Soles CL, Yee AF. A discussion of the molecular mechanisms of moisture transport in epoxy resins. J. Polym. Sci., Part B: Polym. Phys. 2000;38:792–802.10.1002/(ISSN)1099-0488
- DeHoff PH, Anusavice kJ, Wang Z. Three-dimensional finite element analysis of the shear bond test. Dent. Mater. 1995;11:126–131.10.1016/0109-5641(95)80047-6
- Braga RR, Meira JBC, Boaro LCC, et al. Adhesion to tooth structure: a critical review of “macro” test methods. Dent. Mater. 2010;26:e38–e49.10.1016/j.dental.2009.11.150
- Miragaya L, Maia LC, Sabrosa CE, et al. Evaluation of self-adhesive resin cement bond strength to yttria-stabilized zirconia ceramic (Y-TZP) using four surface treatments. J. Adhes. Dent. 2011;13:473–480.
- Craciunescu E, Sinescu C, Negrutiu ML, et al. Shear bond strength tests of zirconia veneering ceramics after chipping repair. J. Adhes. Sci. Technol. 2016;30:666–676.10.1080/01694243.2015.1117304